# Connixtech > CCTV, Security & Access Control Solutions NZ ## Pages - [Alarm Communicator Setup (IP and 4G)](https://connixtech.co.nz/knowledge-base/alarm-communicator-setup/): Setting up IP and 4G alarm communicators in New Zealand after the 3G shutdown: dual path, polling, receiver settings and end-to-end testing. - [Alarm Panel Programming Guide](https://connixtech.co.nz/knowledge-base/alarm-panel-programming-guide/): Programming an intruder alarm panel: engineer access, entry and exit timers, part-set modes, user codes and duress, plus the NZ standards and licensing that apply. - [Alarm Zone Configuration and Wiring](https://connixtech.co.nz/knowledge-base/alarm-zone-configuration/): Alarm zone wiring explained: single and double EOL resistors with real resistance values by manufacturer, where the resistors go, zone types, detector siting and fault-finding. - [CCTV Remote Viewing Configuration](https://connixtech.co.nz/knowledge-base/cctv-remote-viewing-configuration/): How to set up remote CCTV viewing safely: P2P cloud, VPN, and why port forwarding is a bad idea. Includes how to test for CGNAT and which NZ connection types are affected. - [NVR/DVR Setup Guide](https://connixtech.co.nz/knowledge-base/nvr-setup-guide/): Step-by-step NVR setup: hard drives, storage calculation, IP addressing and device activation, adding cameras, recording schedules, hardening and a handover checklist. - [CCTV Camera Mounting and Positioning](https://connixtech.co.nz/knowledge-base/cctv-camera-mounting-positioning/): How to position CCTV cameras for usable footage: pixel density under the superseded DORI model and the new IEC 62676-4:2025 standard, mounting heights, lens choice, IR reflection, PoE and NZ privacy rules. - [Wishlist](https://connixtech.co.nz/wishlist/) - [Access Control Credentials: Programming, Formats and Cloning Risk](https://connixtech.co.nz/knowledge-base/access-control-credential-programming/): Which access control credentials can be cloned and which cannot, card formats and facility codes, enrolment methods, standalone and networked programming, and the lost card procedure. - [Access Control Reader Wiring: Wiegand and OSDP](https://connixtech.co.nz/knowledge-base/access-control-reader-wiring-guide/): Reader wiring reference for access control: Wiegand colour code and real cable distance limits from manufacturer datasheets, OSDP RS-485 topology, termination, addressing and fault-finding. - [Access Control Panel Installation Guide](https://connixtech.co.nz/knowledge-base/access-control-panel-installation-guide/): An access control panel (also called a door controller) is the device that decides whether a door unlocks. - [Two-Factor Code](https://connixtech.co.nz/two-factor-code/) - [About Us](https://connixtech.co.nz/about-us/) - [Terms & Conditions](https://connixtech.co.nz/terms-and-conditions/): Effective Date: 18 March 2026 | Connix Technologies Ltd, New Zealand These Standard Terms and Conditions govern all sales, supply, and trade account arrangements between Connix Technologies Ltd ("Connix", "we", "us") and the trade partner or customer ("you"). - [Downloads](https://connixtech.co.nz/downloads/): Product datasheets, installation manuals and firmware downloads for Connixtech security products. Trade login required. - [Knowledge Base](https://connixtech.co.nz/knowledge-base/): Installation guides, technical specifications, troubleshooting articles and product documentation for Connixtech security products. - [Trade Account Application](https://connixtech.co.nz/trade-account/): Apply today to become a Connix Technologies Reseller Partner and gain access to exclusive wholesale pricing. - [Reseller Program](https://connixtech.co.nz/reseller-program/): Connix Technologies is a trusted New Zealand supplier of professional CCTV surveillance systems, security solutions, automation products, and networking equipment. - [My account](https://connixtech.co.nz/my-account/) - [Checkout](https://connixtech.co.nz/checkout/) - [Cart](https://connixtech.co.nz/cart/) - [Shop](https://connixtech.co.nz/shop/) - [Privacy Policy](https://connixtech.co.nz/privacy-policy/): Connix Technologies Ltd ("Connix", "we", "us") is committed to protecting the privacy of our trade partners, customers, and website visitors in accordance with the New Zealand Privacy Act 2020. - [Contact](https://connixtech.co.nz/contact/) - [FAQ](https://connixtech.co.nz/faq/): If you could change two things about the world, what would you change? If you were offered the chance to feel happy all of the time, would you take it? - [Home](https://connixtech.co.nz/): Complete Security Solutions NZ's trusted distributor of CCTV, alarm systems, access control and smart security. Professional-grade products at trade prices. - [Blog](https://connixtech.co.nz/blog/) ## Products - [Hilook 8MP Smart All-in-One IP Turret Camera - IPC-T289H-MU-SL](https://connixtech.co.nz/product/hilook-8mp-smart-all-in-one-ip-turret-camera-ipc-t289h-mu-sl/): Hilook 8MP Smart All-in-One turret IP camera with built-in speaker, strobe light, and AcuSense AI for active deterrence. - [Hilook 8MP IP ExIR Turret Network Camera - IPC-T282H-MU](https://connixtech.co.nz/product/hilook-8mp-ip-exir-turret-network-camera-ipc-t282h-mu/): HiLook 8MP 4K turret camera with a 2.8mm fixed lens and 30m ExIR night vision, rated IP67 and IK10 for exposed positions. Suits driveways, entrances and yards where detail matters at distance after dark. - [Hilook 8MP Smart Hybrid Light Turret IPC - IPC-T383H-MU](https://connixtech.co.nz/product/hilook-8mp-smart-hybrid-light-turret-ipc-ipc-t383h-mu/): Hilook 8MP Smart Hybrid Light turret IP camera with dual IR and white light illumination for 4K full-colour night vision. - [Hilook 8MP AcuSense Fixed Turret Network Camera - IPC-T381H-MU](https://connixtech.co.nz/product/hilook-8mp-acusense-fixed-turret-network-camera-ipc-t381h-mu/): Hilook 8MP AcuSense fixed turret IP camera with AI human/vehicle detection and IR illumination up to 30m. - [Hilook 6MP Smart Hybrid Light Turret IPC - IPC-T363H-MU](https://connixtech.co.nz/product/hilook-6mp-smart-hybrid-light-turret-ipc-ipc-t363h-mu/): Hilook 6MP Smart Hybrid Light turret IP camera with IR and colour white light illumination for full-colour night vision. - [Hilook 6MP AcuSense Fixed Turret Network Camera Black - IPC-T361H-MU-BLK](https://connixtech.co.nz/product/hilook-6mp-acusense-fixed-turret-network-camera-black-ipc-t361h-mu-black/): Hilook 6MP AcuSense fixed turret IP camera in black finish, with AI human/vehicle detection and IR up to 40m. - [Hilook 6MP AcuSense Fixed Turret Network Camera - IPC-T361H-MU](https://connixtech.co.nz/product/hilook-6mp-acusense-turret-network-camera-ipc-t361h-mu/): Hilook 6MP AcuSense fixed turret IP camera with AI human and vehicle detection, IR up to 40m, and built-in mic. - [Hilook 4MP Fixed Turret Network Camera - IPC-T240H-MU](https://connixtech.co.nz/product/hilook-4mp-fixed-turret-network-camera-ipc-t240h-mu/): Hilook 4MP fixed turret IP camera with IR illumination up to 30m, H.265+ compression, and built-in mic for smart surveillance. - [Hikvision CAT6 U/UTP Solid Copper Network Cable 305M - DS-1LN6UZC0-BLUE](https://connixtech.co.nz/product/hikvision-cat6-u-utp-solid-copper-network-cable-305m-ds-1ln6uzc0-blue/): Hikvision CAT6 U/UTP solid copper 0.5mm network cable, 305-metre box in blue, suitable for CCTV and network installations. - [Hikvision Wall Mount Bracket for Dome Cameras - DS-1273ZJ-130-TRL](https://connixtech.co.nz/product/hikvision-wall-mount-bracket-for-dome-cameras-ds-1273zj-130-trl/): Hikvision DS-1273ZJ-130-TRL Universal Camera Bracket is a versatile mounting accessory designed for compatible Hikvision and HiLook cameras, including selected ColorVu 3.0 and AcuSense models. It provides a secure and practical mounting solution for professional CCTV installations, helping achieve flexible camera positioning and a clean, reliable finish. - [Hikvision Sliding Gate Opener - DS-K3GL606WX-WB](https://connixtech.co.nz/product/hikvision-sliding-gate-opener-ds-k3gl606wx-wb/): The Hikvision DS-K3GL606WX-WB Smart Sliding Gate Opener is designed for residential and commercial gate automation, supporting sliding gates weighing up to 600kg. With built-in Wi-Fi, LAN connectivity and Hik-Connect app support, it offers convenient remote operation and flexible integration with compatible access control, intercom and alarm systems. - [Hikvision Junction Box for Bullet Cameras - DS-1260ZJ](https://connixtech.co.nz/product/hikvision-junction-box-for-bullet-cameras-ds-1260zj/): Hikvision junction box for bullet cameras, providing neat cable management and a professional installation finish. - [Hikvision Junction Box for Dome Cameras - DS-1280ZJ-DM8](https://connixtech.co.nz/product/hikvision-junction-box-for-dome-cameras-ds-1280zj-dm8/): Hikvision junction box accessory for dome cameras, concealing cables and providing a clean installation finish. - [Hikvision 8MP AcuSense Varifocal Bullet Network Camera - DS-2CD2686G2T-IZS](https://connixtech.co.nz/product/hikvision-8mp-acusense-varifocal-bullet-network-camera-ds-2cd2686g2t-izs/): Hikvision 8MP AcuSense varifocal motorised bullet network camera with deep learning AI for accurate human and vehicle detection. - [Hikvision 2.4GHz 300Mbps 1KM Wireless Bridge Kit - DS-3WF1000-EI-2N](https://connixtech.co.nz/product/hikvision-2-4ghz-300mbps-1km-wireless-bridge-kit-ds-3wf1000-ei-2n/): Hikvision 2.4GHz 300Mbps wireless bridge kit for point-to-point transmission up to 1km, ideal for extending CCTV networks. - [Dahua 4 Channel 4K 8MP Cameras Kit - DH-4C8M4-2T](https://connixtech.co.nz/product/dahua-4-channel-camera-kit-dh-4ch-kit1/): The Dahua DH-4C8M4-KIT1 is a 4-channel PoE kit built around four 8MP (4K) dual-light cameras for ultra-clear recording. Plug-and-play auto-detection makes setup simple, with each camera powered over a single PoE cable. The cameras deliver 4K detail, a 110° wide view, 120dB True WDR and 30m white-light + IR night vision, rated IP67, with AI human/vehicle classification and Smart Motion Detection to reduce false alerts. Includes a 2TB HDD (max. capacity up to 10TB) and free DMSS remote monitoring on iOS and Android. - [Dahua 8 Channel 8 Camera IP CCTV Kit - DH-KIT8C6M8-H](https://connixtech.co.nz/product/dahua-8-channel-8-camera-ip-cctv-kit-dh-kit8c86m-h/): The Dahua DH-KIT8C86M-H is a complete 8-channel PoE surveillance kit with eight 6MP dual-light cameras — a capable entry-level system for larger homes and small business. Each camera connects and powers over a single PoE cable and delivers 6MP clarity, 120dB True WDR and 30m white-light + IR night vision, rated IP67 for outdoors. AI human/vehicle classification and Smart Motion Detection cut false alerts. Includes a 4TB HDD (max. capacity up to 10TB) and free DMSS remote monitoring on iOS and Android. - [Dahua 8 Channel 6 Camera IP CCTV Kit - DH-KIT8C6M6-4T](https://connixtech.co.nz/product/dahua-8-channel-6-camera-ip-cctv-kit-dh-kit8c66m-h/): Dahua 8 Channel 6 Camera IP CCTV Kit – DH-KIT8C66M-H is a complete plug-and-play surveillance solution featuring an 8-channel PoE NVR with 4TB HDD and 6 × 6MP dual-light IP cameras. The cameras deliver clear 6MP video with 120dB True WDR and up to 30m IR and white-light night vision, while AI human and vehicle classification and Smart Motion Detection (SMD) help reduce false alerts. With IP67 weather protection, expandable storage up to 10TB and DMSS remote monitoring, it is an ideal security solution for homes and small businesses. Upgrade your security today with the Dahua DH-KIT8C66M-H — complete, intelligent surveillance that's ready to install. Order now or contact Connix Technologies for expert advice and installation options. - [Dahua 6MP Smart Dual Light WizSense Fixed IP Camera - DH-IPC-HDW3667EM-S-IL-ANZ](https://connixtech.co.nz/product/dahua-6mp-smart-dual-light-wizsense-fixed-ip-camera-dh-ipc-hdw3667em-s-il-anz/): The Dahua DH-IPC-HDW3667EM-S-IL-ANZ is a 6MP WizSense fixed-turret IP camera for sharp, detailed 24/7 surveillance. Its 1/2.7″ sensor and 2.8mm lens capture 6MP images, while Smart Dual-Light illumination delivers up to 30m of IR or warm-light night vision. 120dB True WDR handles high-contrast scenes, and WizSense AI with SMD 4.0 provides accurate human/vehicle tripwire and intrusion detection to cut false alerts. Rated IP67 for outdoors and PoE-powered for a single-cable install. - [Dahua 5MP IR Fixed Turret Network Camera - DH-IPC-HDW2541EMP-AS-ANZ](https://connixtech.co.nz/product/dahua-5mp-wizsense-ir-fixed-turret-network-camera-dh-ipc-hdw2541emp-as-anz/): Dahua 5MP WizSense IR fixed turret IP camera with built-in mic, SMD Plus, and H.265+ compression for smart surveillance. - [Dahua 8 Channel 4K PoE NVR - DHI-NVR4108HS-P-4KS3](https://connixtech.co.nz/product/dahua-8-channel-4k-poe-nvr-dhi-nvr4108hs-p-4ks3/): Dahua 8-channel 4K standalone PoE NVR with built-in 8-port PoE switch, supporting H.265+ and up to 8MP resolution. - [Dahua 4 Channel 4K PoE NVR - DHI-NVR4104HS-P-4KS3](https://connixtech.co.nz/product/dahua-4-channel-4k-poe-nvr-dhi-nvr4104hs-p-4ks3/): Dahua 4-channel 4K standalone PoE NVR with built-in 4-port PoE, supporting H.265+ and up to 8MP resolution. - [Dahua 4 Channel AI PoE NVR - DHI-NVR4104HS-P-AI/ANZ](https://connixtech.co.nz/product/dahua-4-channel-ai-poe-nvr-dhi-nvr4104hs-p-ai-anz/): Dahua 4-channel AI standalone PoE NVR with built-in 4-port PoE switch, supporting H.265+ encoding and smart AI analytics. - [CX 2 Core 1.84mm? Power Cable 100M Roll - CX-2C25-100M](https://connixtech.co.nz/product/cx-2-core-1-84mm%c2%b2-power-cable-100m-roll-cx-2c25-100m/): Heavy-duty two-core 1.84mm² power cable on a 100 metre roll, rated 300/500V for powering CCTV cameras, access control and other low-voltage devices. Stranded copper routes easily and the black PVC jacket keeps runs discreet. - [CX 2 Core 1.5sq.mm Speaker Cable 50M Roll - CX-2C15-50M](https://connixtech.co.nz/product/cx-2-core-1-5mm%c2%b2-speaker-cable-50m-roll-cx-2c15-50m/): CX 2-core 1.5mm² speaker cable in a 50 metre roll, suitable for higher-power audio and PA applications. - [CX 2 Core 1.0sq.mm Speaker Cable 50M Roll - CX-2C10-50M](https://connixtech.co.nz/product/cx-2-core-1-0mm%c2%b2-speaker-cable-50m-roll-cx-2c10-50m/): Two-core 1.0mm² OFC speaker cable on a 50 metre roll, sized for ceiling speakers and background music runs. White PVC jacket, with oxygen-free copper conductors for clean low-loss audio over long distributed runs. - [Tycab 6 Core 0.44mm? Security Alarm Cable 100M Roll](https://connixtech.co.nz/product/cx-6-core-0-44mm%c2%b2-security-alarm-cable-100m-roll-cx-6c44-100m/): CX 6-core 0.44mm² security alarm cable in a 100 metre roll, suitable for alarm sensors and multi-zone installations. - [Tycab 8 Core 0.44mm? Security Alarm Cable 250M Roll](https://connixtech.co.nz/product/cx-8-core-0-44mm%c2%b2-security-alarm-cable-250m-roll-cx-8c44-250m/): CX 8-core 0.44mm² security alarm cable in a 250 metre roll, suitable for larger alarm installations. - [Tycab 4 Core 0.22mm? Security Alarm Cable 100M Roll](https://connixtech.co.nz/product/cx-4-core-0-22mm%c2%b2-security-alarm-cable-100m-roll-cx-4c22-100m/): CX 4-core 0.22mm² security alarm cable in a 100 metre roll, suitable for alarm sensors and detectors. - [CX 2-Channel Digital Keypad Indoor/Outdoor - CX-2C-KP](https://connixtech.co.nz/product/cx-2-channel-digital-keypad-indoor-outdoor-cx-2c-kp/): The CX-2C-KP is a rugged 2-channel access-control keypad and 125kHz proximity reader for indoor or outdoor use, rated IP66 and operating from −40°C to 60°C. Two relay channels control dual zones — locks, strikes or gates — with access by card, PIN (4–6 digits) or card+PIN, and capacity for up to 1,100 users. Latch mode holds a door or gate open, and built-in door-open-too-long alarm and doorbell functions add convenience. Powered by 12–28V AC/DC. - [CX 12V 7AH Rechargeable Sealed Lead Acid Battery - 12V 7AH Battery](https://connixtech.co.nz/product/cx-12v-7ah-rechargeable-sealed-lead-acid-battery-12v-7ah-battery/): 12V 7AH rechargeable sealed lead acid (SLA) battery, suitable for alarm systems, UPS, and access control backup power. - [CX Cat6 Pass Through RJ45 Connector 20 Pack - PT-RJ45-C6-20](https://connixtech.co.nz/product/cx-cat6-pass-through-rj45-connector-20-pack-pt-rj45-c6-20/): CX Cat6 Pass-Through RJ45 connectors in a 20-pack — a handy size for home and small-office jobs. The pass-through design feeds conductors out the front of the plug for accurate crimping and a clear alignment check, while gold-plated contacts ensure reliable connections. Compatible with Cat5e and Cat6 cable up to 7mm OD, and works with standard pass-through RJ45 tools. - [CX Cat6 Pass Through RJ45 Plug- PT-RJ45-C6-50](https://connixtech.co.nz/product/cx-cat6-pass-through-rj45-connector-50-pack-pt-rj45-c6-50/): CX Cat6 Pass-Through RJ45 connectors in a 50-pack — ideal for smaller jobs. The pass-through design lets conductors exit the front of the plug for fast, accurate crimping and a clear visual wire check before termination. Gold-plated 8P8C contacts resist corrosion, and the connectors are compatible with both Cat5e and Cat6 cable. Use with a pass-through RJ45 crimp tool. - [CX Cat6 Pass Through RJ45 - PT-RJ45-C6-100](https://connixtech.co.nz/product/cx-cat6-pass-through-rj45-connector-100-pack-pt-rj45-c6-100/): CX Cat6 Pass-Through RJ45 connectors in a 100-pack — great value for installers. The pass-through design lets conductors exit the front of the plug for fast, accurate crimping and a clear visual wire check before termination. Gold-plated 8P8C contacts resist corrosion for reliable connections, and the connectors suit both Cat5e and Cat6 cable. Use with a compatible pass-through crimp tool. - [CX 50m Wireless HDMI Transmitter/Receiver - CX-HW50](https://connixtech.co.nz/product/cx-50m-wireless-hdmi-transmitter-receiver-cx-hw50/): CX 50 Metre Wireless HDMI Transmitter/Receiver kit for cable-free 4K video transmission up to 50 metres. - [CX 30m 4K/2K HDMI Cable - CX-HC30](https://connixtech.co.nz/product/cx-30m-4k-2k-hdmi-cable-cx-hc30/): The CX-HC30 is a 30m 4K HDMI 2.0 cable — the longest in the range, for long-distance runs in large venues, function centres and signage networks. Carries 4K @ 60Hz over 18Gbps with gold-plated Type-A connectors and triple shielding. - [CX 20m 4K/2K HDMI Cable - CX-HC20](https://connixtech.co.nz/product/cx-20m-4k-2k-hdmi-cable-cx-hc20/): The CX-HC20 is a 20m 4K HDMI 2.0 cable for long AV cable runs across halls, auditoriums and large commercial installs where source and screen are far apart. 4K @ 60Hz, 18Gbps bandwidth, gold-plated Type-A, triple shielded. - [CX 15m 4K/2K HDMI Cable - CX-HC15](https://connixtech.co.nz/product/cx-15m-4k-2k-hdmi-cable-cx-hc15/): The CX-HC15 is a 15m 4K HDMI 2.0 cable for extended runs between rooms or up to a high-mounted display, common in retail signage and larger meeting spaces. 4K @ 60Hz over 18Gbps with gold-plated Type-A connectors and triple shielding. - [CX 10m 4K/2K HDTV HDMI Cable - CX-HC10](https://connixtech.co.nz/product/cx-10m-4k-2k-hdmi-cable-cx-hc10/): The CX-HC10 is a 10-metre HDMI 2.0 cable built for reliable 4K/2K playback across TVs, monitors, projectors and gaming consoles. It supports 4K at 60Hz with 18Gbps bandwidth, while gold-plated connectors and triple shielding ensure a stable, interference-free signal over the full run. A built-in Ethernet channel and 19+1 bare-copper construction make it a dependable choice for home and commercial AV installations. - [CX 5m 4K/2K HDMI Cable - CX-HC5](https://connixtech.co.nz/product/cx-5m-4k-2k-hdmi-cable-cx-hc5/): The CX-HC5 is a 5m 4K HDMI 2.0 cable for rooms where the source is across the space — a ceiling projector, a rack a few metres from the screen, or a meeting-room display. 4K @ 60Hz over 18Gbps, gold-plated Type-A, triple shielded. - [CX 3m 4K/2K HDMI Cable - CX-HC3](https://connixtech.co.nz/product/cx-3m-4k-2k-hdmi-cable-cx-hc3/): The CX-HC3 is a 3m 4K HDMI 2.0 cable, the everyday length for wall-mounted TVs and desktop AV where the source is a metre or two from the display. 4K @ 60Hz, 18Gbps bandwidth, gold-plated Type-A connectors, triple shielded. - [CX 1.5m 4K/2K HDTV HDMI Cable - CX-HC1](https://connixtech.co.nz/product/cx-1-5m-4k-2k-hdmi-cable-cx-hc1/): The CX-HC1 is a short 1.5m 4K HDMI 2.0 cable for tight equipment-to-display runs — a media player, NVR or set-top box sitting right beside the screen. Carries 4K @ 60Hz over 18Gbps with gold-plated Type-A connectors and triple shielding. - [AVTRON 20W Bluetooth Speaker - CX-BT520](https://connixtech.co.nz/product/avtron-20w-bluetooth-speaker-cx-bt520/): AVTRON 20W Bluetooth wireless speaker for versatile audio playback in commercial and home environments. - [AVTRON 6" 30 Watt Ceiling Speaker - AP-C321](https://connixtech.co.nz/product/avtron-6-15-watt-ceiling-speaker-ap-c321/): The AVTRON AP-C32 is a 6-inch two-way (1-inch treble) high-performance 100V-line ceiling speaker with 15W multi-tap power, delivering higher output and an extended 75Hz–18kHz range for music-forward spaces like restaurants, showrooms and gyms. 120° coverage, 205mm cut-out. - [AVTRON 6" 3/6 Watt Ceiling Speaker - AP-C16](https://connixtech.co.nz/product/avtron-6-3-6-watt-ceiling-speaker-ap-c16/): The AVTRON AP-C16 is a 6-inch 100V-line ceiling speaker with switchable 3W/6W tapping and a 120° coverage pattern, giving wider, fuller sound than the 5-inch AP-C15 for open-plan offices, cafés and retail floors. 100Hz–18kHz range, 91dB sensitivity, 175mm cut-out. - [AVTRON 5" 3/6 Watt Ceiling Speaker - AP-C12](https://connixtech.co.nz/product/avtron-5-3-6-watt-ceiling-speaker-ap-c12/): The AVTRON AP-C12 is a 5-inch full-range 100V-line ceiling speaker with switchable 3W/6W tapping — a compact, low-output choice for background music and paging in offices, corridors and small retail. 100Hz–16kHz range, 91dB sensitivity, 150mm cut-out and just 0.5kg. - [AVTRON 120W Mini Mixer Amplifier - AMC-120WD](https://connixtech.co.nz/product/avtron-120w-mini-mixer-amplifier-amc-120wd/): The AVTRON AMC-120W is a 120W RMS mixer amplifier for large venues and high speaker counts — warehouses, function centres, showrooms and multi-zone commercial PA. Bluetooth/USB/FM/SD media, three mic/line inputs and 100V/70V/4Ω line outputs in a heavier 3.5kg build. - [AVTRON 60W Mini Mixer Amplifier - AMC-60W](https://connixtech.co.nz/product/avtron-60w-mini-mixer-amplifier-amc-60w/): The AVTRON AMC-60W is a 60W RMS mixer amplifier for mid-sized public-address installs — a larger shop, restaurant, gym or multi-room office running several ceiling speakers. Same Bluetooth/USB/FM/SD media and 100V/70V/4Ω outputs as the 30W, with the headroom for more speakers per line. - [AVTRON 30W Mini Mixer Amplifier - AMC-30WA](https://connixtech.co.nz/product/avtron-30w-mini-mixer-amplifier-amc-30wa/): The AVTRON 30W Mini Mixer Amplifier - AMC-30WA is a compact 30W RMS mixer amplifier for single-zone background music and paging — ideal for a retail store, café, waiting room or small office. Three mic/line inputs plus Bluetooth, USB, FM and SD playback drive 100V, 70V or 4Ω speaker lines. - [HiLook 4Ch 4 Camera IP CCTV Kit - IK-4246TH-MM/P](https://connixtech.co.nz/product/hilook-ik-4246th-mm-p/): 4CH PoE NVR + 4× 6MP Turret Cameras + 2TB HDD. Professional IP CCTV kit with AI detection, 120dB True WDR, built-in dual microphone, and Hik-Connect remote viewing. - [Dahua 4CH-KIT-1 4Ch 4 Camera IP CCTV Kit DH-KIT4C6M4-2T](https://connixtech.co.nz/product/dahua-4ch-kit-1-4ch-4-camera-ip-cctv-kit-dh-kit4c46m-h/): Dahua 4 Channel 4 Camera IP CCTV Kit – DH-KIT4C46M-2T is a complete plug-and-play PoE surveillance solution featuring a 4-channel PoE NVR with 2TB HDD and 4 × 6MP dual-light IP cameras. The cameras provide detailed 6MP imaging with a 110° wide viewing angle, 120dB True WDR and up to 30m IR and white-light night vision. AI human and vehicle classification and Smart Motion Detection (SMD) help reduce false alerts, while IP67 weather protection ensures reliable outdoor performance. With storage expandable up to 10TB and free DMSS remote monitoring, it is an ideal security solution for homes and small businesses. - [HiLook IK-6486TH-MM/P 8Ch 6 Camera 4TB IP CCTV Kit](https://connixtech.co.nz/product/hilook-ik-6486th-mm-p-8ch-6-camera-ip-cctv-kit/): 8CH PoE NVR + 6× 6MP Turret Cameras + 4TB HDD. High-capacity IP CCTV bundle ideal for commercial sites. AI human & vehicle detection, H.265+ compression, Hik-Connect remote access. - [HiLook IK-2146TH-MM/P 4Ch 2 Camera 1TB IP CCTV Kit](https://connixtech.co.nz/product/hilook-ik-2146th-mm-p/): The HiLook IK-2146TH-MM/P is a 4-channel PoE CCTV kit supplied with two 6MP cameras — a tidy entry-level system for homes and small offices, expandable to four cameras. Power-over-Ethernet means a single cable per camera, while AI human/vehicle classification and Smart Motion Detection reduce false notifications. Each camera offers 6MP resolution, a 105° wide view, 120dB True WDR, 30m IR night vision and a built-in mic, rated IP67 for outdoor use. Includes a pre-installed 1TB HDD and free Hik-Connect remote monitoring. - [Sliding Gate Top Guide Roller 500mm Black CX-GR500B](https://connixtech.co.nz/product/sliding-gate-top-guide-roller-500mm-black-cx-gr500b/): 500mm sliding gate top guide roller assembly with 40mm black nylon rollers on a steel base-mount bracket. The tall stem suits gates needing support well above the track, keeping travel smooth, quiet and correctly aligned outdoors. - [Electric Magnetic Lock CX-MG600](https://connixtech.co.nz/product/electric-magnetic-lock-cx-mg600/): The CX-MG600 is a waterproof electromagnetic lock (mag lock) offering up to 600lbs (280kg) of holding force — well suited to gates and doors in small and medium-sized business access-control systems. It runs on 12V DC ( - [Swing Gate Hinge 50 x 50mm Box Section Aluminum Gates CX-SWH50](https://connixtech.co.nz/product/swing-gate-hinge-50-x-50mm-box-section-aluminum-gates-cx-swh50/): The CX-SWH50 is an adjustable swing-gate hinge designed for 50 × 50mm aluminium box-section gates. Made from heavy-duty steel with a black powder-coated finish for corrosion resistance, its fully adjustable design allows precise alignment during install. The M16 thread with weld-on or bolt-on mounting suits both manual and automatic aluminium swing gates, delivering smooth, quiet and reliable operation with reduced frame wear. - [Swing Gate Hinge Adjustable Black CX-SWH02](https://connixtech.co.nz/product/swing-gate-hinge-adjustable-black-cx-swh02/): The CX-SWH02 is a heavy-duty adjustable swing-gate hinge in a black powder-coated finish for reliable outdoor performance. High-strength steel construction and a fully adjustable design make precise gate alignment simple during installation, while the M16 thread and weld-on/adjustable mounting suit both manual and automatic swing gates. At 100mm long, it supports smooth operation and reduces wear on the gate frame — ideal for residential and commercial use. - [Adjustable Swing Gate Hinge Farm Style Heavy Gates CX-L24B](https://connixtech.co.nz/product/adjustable-swing-gate-hinge-for-farm-style-heavy-gates/): The CX-L24B is a heavy-duty farm-style adjustable swing-gate hinge built for large, heavy gates on 100 × 100mm (and larger) aluminium or timber posts. Made from high-strength steel with a black powder-coated finish, it carries gates up to 300kg and offers full adjustment for precise alignment. The M24 thread and weld-on (aluminium) or bolt-on fitting suit both manual and automatic swing systems for smooth, reliable operation. - [230V Mains High Speed Sliding Gate Motor 600Kg - Velos QK-V600](https://connixtech.co.nz/product/quiko-italian-velos-v600-230v-sliding-gate-motor-opener-for-gates-up-to-600kg/): Velos, Operator / Opener For gates up to 600KG. 240V Motor.Small dimension, big power. VELOS series sliding gate operators of QUIKO unite ease of installation with huge power and reduced dimensions, allowing for more installation versatility in narrow spaces. For Gates up to 600 KG. Gate opening Speed 12 meters per minute. 240 V Electric motor for Gates on high slopes. 50% Duty cycle. Comes with 2 x Manual lock release key for emergency manual operation. Reliable product backed up with a Two-year warranty. PROMOTIONAL OFFER: FREE 2 four button Remotes. - [230V Mains High Speed Sliding Gate Motor 600Kg - Velos QK-V600FX](https://connixtech.co.nz/product/230v-high-speed-sliding-gate-motor-600kg-velos-qk-v600fx/): Velos Sliding Gate Operator / Opener For gates up to 600KG, 240V Motor, High-Speed Opening. Small dimension, big power. VELOS series sliding gate operators of QUIKO unite ease of installation with huge power and reduced dimensions, allowing for more installation versatility in narrow spaces. For Gates up to 600 KG. Gate opening Speed 20 meters per minute. 240 V Electric motor for Gates on high slopes. 50% Duty cycle. Comes with 2 x Manual lock release key for emergency manual operation. Reliable product backed up with a Two-year warranty. PROMOTIONAL OFFER: FREE 2 four button Remotes. - [24V Sliding Gate Motor 600KG - Velos QK-V600B](https://connixtech.co.nz/product/24v-sliding-gate-motor-600kg-velos-qk-v600b/): Velos Sliding Gate Operator / Opener For gates up to 600KG, 24V Intensive use. For Residential OR Commercial Use. Optional Battery Backup. Small dimension, big power. VELOS series sliding gate operators of QUIKO unite ease of installation with huge power and reduced dimensions, allowing for more installation versatility in narrow spaces. For Gates up to 600 KG. Gate opening Speed 12 meters per minute. 24 V Electric motor for Intensive use. 100% Duty cycle. Battery’s can be connected for power back up in case of power failure. Optional. Solar Power ready. Optional Reliable product backed up with a Two-year warranty. - [Commercial Sliding Gate Opener 800KG Moovy M800](https://connixtech.co.nz/product/commercial-sliding-gate-opener-800kg-moovy-m800/): Moovy 800KG Commercial sliding gate 230V Opener MOOVY series gear motors can handle automatic sliding gates of large sizes. Suitable for heavy-duty applications for commercial use. Quick Fact: For Gates up to 800 KG. Gate opening Speed 12 meters per minute. 230 V Electric motor for Gates on high slopes. 50% Duty cycle. Comes with 2 x Manual lock release key for emergency manual operation. Reliable product backed up with a Two-year warranty. PROMOTIONAL OFFER: FREE 2 four button Remotes. - [230V Commercial Sliding Gate Motor 1200KG - Moovy QK-M1200](https://connixtech.co.nz/product/230v-commercial-sliding-gate-motor-1200kg-moovy-m1200/): Moovy 1200KG Commercial sliding gate 230V Opener MOOVY series gear motors can handle automatic sliding gates of large sizes. Suitable for heavy-duty applications for commercial use. For Gates up to 1200 KG. Gate opening Speed 12 meters per minute. 240 V Electric motor for Gates on high slopes. 50% Duty cycle. Comes with 2 x Manual lock release key for emergency manual operation. Reliable product backed up with a Two-year warranty. PROMOTIONAL OFFER: FREE 2 four button Remotes. - [Industrial 230V 3Phase Sliding Gate High Speed Motor up to 2500KG Ercole QK-E2500TINV](https://connixtech.co.nz/product/industrial-230v-3phase-sliding-gate-high-speed-motor-up-to-2500kg-ercole-qk-e2500tinv/): The Quiko Ercole QK-E2500TINV is a heavy-duty, high-speed sliding gate operator designed for industrial and commercial applications requiring reliable automation for large and frequently operated gates. Featuring an oil-bath gearmotor, inverter-controlled operation and a robust mechanical design, the QK-E2500TINV can automate sliding gates weighing up to 2,500 kg, with adjustable operating speeds of up to 20 metres per minute. The motor is designed for intensive use with a 90% working cycle, making it suitable for warehouses, factories, commercial premises, industrial sites, logistics facilities and high-traffic entrances. - [Articulated Arm 24V Gate Operator QK-SCA24](https://connixtech.co.nz/product/articulated-arm-24v-gate-operator-qk-sca24/): Quiko Scarabeo 24V articulated arm gate operator for leaves up to 2.5m and 250kg, opening to 120° at 15 metres per minute. Suits pillars too wide for a linear ram. Supplied with two remotes and two manual release keys, with a two year warranty. - [Eon 240V Swing Gate Actuator For Gates 4Meters QK-E400](https://connixtech.co.nz/product/eon-240v-swing-gate-actuator-for-gates-4meters-qk-e400/): Quiko Eon 230V linear swing gate actuator for leaves up to 4m, delivering 3000N thrust with an 18 second opening time. Slim enough for narrow pillar spaces, self-locking, IP54 rated, with a supplied key release for power failures. - [Eon 24V Swing gate actuator for gates Upto 4 meters - QK-E400B](https://connixtech.co.nz/product/eon-24v-swing-gate-actuator-for-gates-upto-4-meters-qk-e400b/): Quiko Eon 24V linear swing gate actuator for residential leaves up to 4m, with a slim body for installations where space beside the pillar is tight. Self-locking with a supplied unlocking key, IP54 rated and effectively maintenance free. - [Rotello 240V Swing gate actuator for gates Upto 4.5 meters-R400](https://connixtech.co.nz/product/rotello-240v-swing-gate-actuator-for-gates-upto-4-5-meters-r400/): Quiko Rotello 230V electromechanical swing gate actuator for leaves up to 4.5m, rated 3000N thrust with an 18 second opening time. Irreversible steel and bronze mechanism, IP54 rated, with key-operated manual release during a blackout. - [Rotello 24V Swing gate actuator for gates Upto 4.5 meters-R400B](https://connixtech.co.nz/product/rotello-24v-swing-gate-actuator-for-gates-upto-4-5-meters-r400b/): Quiko Rotello 24V electromechanical swing gate actuator for leaves up to 4.5m, handling 600kg on a 2m leaf and 300kg at full 4.5m extension. Irreversible, near-silent and maintenance free, with key-operated manual release for power cuts. - [Sliding Gate Track 20mm U Groove 3meters CX-UT3-20](https://connixtech.co.nz/product/sliding-gate-track-20mm-u-groove-3meters-cx-ut3-20/): Three metre sliding gate track with a wider 20mm U-groove in heavy-duty steel, pre-drilled with 24 fixing holes for 6.4mm concrete anchors. Rounded edges limit tyre damage on vehicle crossings. Anchors sold separately. - [Sliding Gate Top Guide Rollers With bracket CX-RWB60](https://connixtech.co.nz/product/sliding-gate-top-guide-rollers-with-bracket-cx-rwb60/): Small sliding gate top guide roller with mounting bracket, designed to keep sliding gates aligned and operating smoothly. Adjustable bracket with 38–83mm mounting range. - [Sliding Gate Top Guide Rollers With Bracket 120mm CX-RWB120](https://connixtech.co.nz/product/sliding-gate-top-guide-rollers-with-bracket-120mm-cx-rwb120/): 120mm sliding gate top guide roller with outdoor mounting bracket, designed to keep sliding gates aligned and operating smoothly. Adjustable bracket with 0–77mm mounting range. - [Sliding Gate Top Guide Roller C Bracket CX-CRWB150](https://connixtech.co.nz/product/sliding-gate-top-guide-roller-c-bracket-cx-crwb150/): Sidewise 150mm sliding gate guide roller with C type mounting bracket, designed to keep sliding gates aligned and operating smoothly. - [Sliding Gate Track 16mm U Groove 3meters CX-UT3-16](https://connixtech.co.nz/product/sliding-gate-track-16mm-u-groove-3meters-cx-ut3-16/): Three metre sliding gate track with a 16mm U-groove in heavy-duty steel, pre-drilled with 24 fixing holes for 6.4mm concrete anchors. Rounded edges reduce tyre damage where vehicles cross. Anchors sold separately. - [Top Guide Rollers L Bracket CX-BRL](https://connixtech.co.nz/product/top-guide-rollers-l-bracket-cx-brl/): L-type top guide roller bracket in black powder-coated steel, adjustable from 0 to 77mm to suit 40mm diameter rollers. Keeps a sliding gate aligned and stable at the top edge. Bracket only — rollers sold separately. - [Gate Catcher Adjustable Closing End with Guide Roller CX-CHG05](https://connixtech.co.nz/product/gate-catcher-adjustable-closing-end-with-guide-roller-cx-chg05/): Adjustable sliding gate closing-end catcher in black powder-coated aluminium, with dual nylon guide rollers and 55-90mm of adjustment for precise alignment. Post-mounts directly, with optional side mounting. - [Fixed Sliding Gate Catcher Black CX-FCH60](https://connixtech.co.nz/product/fixed-sliding-gate-catcher-black-cx-fch60/): Sliding gate Closing end catcher. Galv. and powder-coated black. Dimensions as below B – 65MM A – 130MM A1 – 80MM S – 4MM C – 74MM - [Fixed Catcher CX-FCH02](https://connixtech.co.nz/product/fixed-catcher-cx-fch02/): Fixed closing-end catcher for sliding gates in heavy-duty powder-coated steel, with a rubber bumper to absorb impact and cut noise. Slotted mounting holes make alignment quick, and it post-mounts directly on manual or automatic gates. - [Plastic Shroud/ Rain Cover CX-RS07](https://connixtech.co.nz/product/plastic-shroud-rain-cover-cx-rs07/): Keypad/Intercom Plastic Shroud/ Rain Cover Dimensions as below Wide – 90 mm High – 135 mm Deep – 75 mm - [Swing Gate Stopper CX-SWS1](https://connixtech.co.nz/product/swing-gate-stopper-cx-sws1/): Galvanised and powder-coated swing gate stopper that limits over-travel at the end of the arc, protecting hinges, latches and the gate operator. Fits single and double swing gates and fixes to concrete or paved surfaces. - [Sliding gate opening end stopper](https://connixtech.co.nz/product/sliding-gate-opening-end-stopper/): Sliding gate opening end stopper powder coated Black – Small Dimensions as below H – 95MM AXB – 100x80MM S – 8 MM - [Sliding Gate Opening End Stopper Big CX-SLS04](https://connixtech.co.nz/product/sliding-gate-opening-end-stopper-big-cx-sls04/): Heavy-duty sliding gate end stopper in galvanised, black powder-coated steel, halting the gate at the fully open position. Absorbs impact to protect the motor, rollers and track, and bolts to concrete, steel posts or the gate frame. - [Siding Gate Nylon Gear Rack Commercial Grade CX-GR-NYLON](https://connixtech.co.nz/product/siding-gate-nylon-gear-rack-commercial-grade-cx-grnylon/): The CX-GRNYLON is a commercial-grade nylon gear rack with an internal steel core, engineered for smooth, quiet and reliable sliding-gate operation. The corrosion-resistant, maintenance-free nylon construction suits high-cycle commercial and industrial gates while running more quietly than steel. Each 1020mm length ships with six mounting brackets plus self-tapping screws and square washers for easy installation, and is compatible with most sliding-gate motors. - [Siding Gate Industrial Steel Gear Rack CX- GRSteel](https://connixtech.co.nz/product/siding-gate-industrial-steel-gear-rack-cx-grsteel/): Siding gate industrial uses, steel gear rack. It comes with Weld-on Mounting lugs and bolts. - [Plastic post cap 100mm Square](https://connixtech.co.nz/product/plastic-post-cap-100mm-square/): Post cap made out of plastic for 100mm Square Post designed to fit 100mm square post H – 24MM B – 100mm L – 100mm S – 3MM - [Steel Pyramid Post Cap Galv 100mm Square CX-SCP100](https://connixtech.co.nz/product/steel-pyramid-post-cap-galv-100mm-square-cx-scp100/): Galvanised steel pyramid post cap for 100 x 100mm square posts, closing the open top against water ingress, rust and debris. 1.2mm steel with a 10mm post overlap and 23mm overall height. - [Steel Pyramid Post Cap Galv 150mm Square CX-SCP150](https://connixtech.co.nz/product/steel-pyramid-post-cap-galv-150mm-square-cx-scp150/): Galvanised steel pyramid post cap for 150 x 150mm square posts, sealing the open top against water, rust and debris. 1.2mm steel with a 17mm post overlap and a low-profile 30mm height for a clean finish. - [Adjustable Swing Gate Hinge With Long Bolt CX-SWH03](https://connixtech.co.nz/product/adjustable-swing-gate-hinge-with-long-bolt-cx-swh03/): The CX-SWH03 is a heavy-duty adjustable swing-gate hinge engineered for precise alignment and smooth, long-lasting operation. Made from high-strength steel with a weather-resistant black powder-coated finish, it features an M18 threaded long bolt and an adjustable design that simplifies installation and lets you fine-tune gate position after fitting. At 138mm long with bolt-on/screw mounting, it suits both residential and commercial swing gates and reduces wear on the gate frame over time. - [Gate Track In Ground Mounting Groove 20mm CX-ING3U-D20](https://connixtech.co.nz/product/gate-track-in-ground-mounting-groove-20mm-cx-ing3u-d20/): The CX-ING3U-D20 is an in-ground gate track designed to be cemented permanently into a new concrete base, giving a flush, recessed guide for 20mm U-groove sliding-gate wheels. Made from heavy-duty steel with a galvanised zinc finish for long-term corrosion resistance, it ensures smooth, stable and reliable gate travel. Suitable for residential, commercial and industrial sliding gates. - [Sliding Gate Hardware Kit CX-SGHKIT1](https://connixtech.co.nz/product/sliding-gate-hardware-kit-cx-sghkit1/): Complete Sliding Gate Hardware Kit This sliding gate hardware kit is suitable for most sliding gates installed on flat ground and is designed for gates weighing up to 500kg. Important Installation Note If your gate is installed on a slope with a height difference of more than 30mm, a larger guide roller bracket is recommended to ensure smooth and reliable gate operation. Customisation If you would like to swap or substitute any of the items included in the kit, please let us know before placing your order. We are happy to customise the kit to suit your project requirements. - [Spike Single Top Sliding Gate CX-STSLG1](https://connixtech.co.nz/product/spike-single-top-sliding-gate-cx-stslg1/): The CX-STSLG1 is a spike-top single sliding gate manufactured from lightweight, corrosion-resistant aluminium with a durable black powder-coat finish. The standard 4.2m × 1.7m panel features a round-bar design topped with decorative aluminium spikes for added security, built on a 50×50×3.0mm frame with a reinforced 80×50×3.0mm bottom rail. Custom sizes and colours available on request. Ideal for residential and commercial driveways where security and a clean architectural look matter. - [Spike Single Top Sliding Gate CX-STSLG2](https://connixtech.co.nz/product/spike-single-top-sliding-gate-cx-stslg2/): The CX-STSLG2 is a single-spike-top sliding gate that balances security with a clean, classic look. The standard 4.2m × 1.7m panel is manufactured from lightweight, rust-free aluminium with a black powder-coat finish and a round-bar-and-spike design on a 50×50×3.0mm frame with an 80×50×3.0mm bottom rail. Custom sizes and colours are available to suit residential and commercial driveways. - [SLAT Single Top Sliding Gate CX-STSLG3](https://connixtech.co.nz/product/slat-single-top-sliding-gate-cx-stslg3/): The CX-STSLG3 is a sliding gate with a horizontal slat design that gives a sleek, contemporary street appeal while maintaining privacy. The standard 3.2m × 1.7m panel is crafted from lightweight aluminium with a durable black powder-coat finish, using 90mm horizontal slat bars on an 80×50×3.0mm frame. Custom sizes and colours are available; ideal for modern residential and commercial entrances. - [Window Top TGV Sliding Gate CX-STSLG4](https://connixtech.co.nz/product/window-top-tgv-sliding-gate-cx-stslg4/): The CX-STSLG4 is a Tongue-and-Groove (vertical) sliding gate with a decorative window-top detail, blending privacy with a clean modern profile. The standard 3.2m × 1.7m panel is made from lightweight, corrosion-resistant aluminium with a black powder-coat finish, using 107mm vertical slat bars on an 80×50×3.0mm bottom frame. Custom sizes and colours are available on request; suits residential and commercial driveways. - [Full Privacy TGV Swing Gate CX-STSWG5](https://connixtech.co.nz/product/full-privacy-tgv-swing-gate-cx-stswg5/): The CX-STSWG5 is a double-leaf full-privacy Tongue-and-Groove (vertical) swing gate that completely screens the entrance for maximum privacy. Each standard leaf is 1.6m (W) × up to 1.7m (H), made from lightweight aluminium with a white powder-coat finish and 107mm vertical slat bars on an 80×50×3.0mm frame. Custom sizes and colours available to suit residential and commercial properties. - [Window Top TGV Swing Gate CX-STSWG6](https://connixtech.co.nz/product/full-privacy-tgv-swing-gate-cx-stswg5-2/): The CX-STSWG6 is a double-leaf Tongue-and-Groove (vertical) swing gate with a decorative window-top detail, offering privacy with a modern architectural look. Each standard leaf measures 1.6m (W) × up to 1.7m (H) in lightweight aluminium with a white powder-coat finish, using 107mm vertical slat bars on an 80×50×3.0mm frame. Custom sizes and colours are available; suits residential and commercial entrances. - [Double Top Sliding Gate CX-STSLG8](https://connixtech.co.nz/product/double-top-sliding-gate-cx-stslg8/): The CX-STSLG8 is a sliding gate featuring a double-top-rail design for a refined, modern finish. The standard 4.2m × 1.7m panel is crafted from lightweight, rust-free aluminium with a black powder-coat finish on an 80×50×3.0mm bottom frame, using 19mm round bars. Custom sizes and colours are available to suit your entrance; suitable for residential and commercial applications. - [Double Top Sliding Gate CX-STSLG9](https://connixtech.co.nz/product/double-top-sliding-gate-cx-stslg9/): The CX-STSLG9 is a sliding gate with a clean double-top-rail design that delivers a smart, contemporary look without spikes. The standard 4.2m × 1.7m panel is manufactured from lightweight, corrosion-resistant aluminium with a durable black powder-coat finish on an 80×50×3.0mm bottom frame. Custom sizes and colours are available on request; ideal for residential and commercial driveways. - [Spike Double Top Sliding Gate CX-STSLG10](https://connixtech.co.nz/product/spike-double-top-sliding-gate-cx-stslg10/): The CX-STSLG10 is a sliding gate topped with a double row of spikes for enhanced security and street presence. The standard 4.2m × 1.7m panel is built from lightweight, rust-free aluminium with a black powder-coat finish and a round-bar-and-spike design on an 80×50×3.0mm bottom frame. Custom sizes and colours are available to suit residential and commercial driveways. - [Spike Double Top Swing Gate CX-DTSWG11](https://connixtech.co.nz/product/spike-double-top-swing-gate-cx-dtswg11/): The CX-DTSWG11 is a double-leaf swing gate finished with a double spike top for added height and security. Each standard leaf is 1.6m (W) × up to 1.7m (H) in lightweight aluminium with a durable black powder-coat finish, built with two top rails and a round-bar-and-spike design on a 50×50×3.0mm frame. Custom sizes and colours available — a smart, secure choice for residential and commercial entrances. - [Spike Waved Double Top Sliding Gate CX-STSLG12](https://connixtech.co.nz/product/spike-waved-double-top-sliding-gate-cx-stslg12/): The CX-STSLG12 is a sliding gate with a distinctive waved-profile double spike top that adds a decorative flourish to a secure entrance. The standard 4.2m × 1.7m panel is manufactured from lightweight, corrosion-resistant aluminium with a black powder-coat finish and a round-bar-and-spike design on an 80×50×3.0mm bottom frame. Custom sizes and colours are available to suit residential and commercial driveways. - [Spike Double Top Swing Gate CX-DTSWG13](https://connixtech.co.nz/product/spike-double-top-swing-gate-cx-dtswg13/): The CX-DTSWG13 is a double-leaf swing gate with a double spike top for extra height and security. Each leaf measures a standard 1.6m (W) × up to 1.7m (H), made from lightweight aluminium with a black powder-coat finish, featuring two top rails and a decorative round-bar-and-spike design on a 50×50×3.0mm frame. Custom sizes and colours available; suits residential and commercial entrances. - [Commercial Top Sliding Gate CX-CSTSLG14](https://connixtech.co.nz/product/gate14/): The CX-CSTSLG14 is a commercial-grade sliding gate with a double spike top for added security. The standard 4.2m × 1.7m panel is made from lightweight, rust-free aluminium with a hard-wearing black powder-coat finish, built on an 80×50×3.0mm bottom frame with a decorative round-bar and spike design. Custom sizes and colours are available to suit your opening — a robust choice for commercial and residential driveways. - [Full Privacy Louvre Sliding Gate CX-STSLG15](https://connixtech.co.nz/product/full-privacy-louvre-sliding-gate-cx-stslg15/): The CX-STSLG15 is a full-privacy louvre sliding gate that combines security with complete screening — ideal where you want to keep the driveway and yard out of view. Manufactured from lightweight, corrosion-resistant aluminium with a durable black powder-coat finish, the standard 3.2m × 1.7m panel uses angled louvre slats on an 80×50×3.0mm frame. Custom sizes and colours are available on request; suits residential and commercial entrances. - [Wireless Keypad Touch Button CX-KPTW09](https://connixtech.co.nz/product/wireless-keypad-touch-button-cx-kptw09/): The CX-KPTW09 is a wireless touch keypad for controlling up to two gate or door operators without running cable to the entry point. It communicates at 433MHz with the included relay receiver and features an LED-backlit touch keypad in a weatherproof IP55 housing for outdoor use. Suitable for garage doors, sliding and swing gates across residential, commercial and industrial sites; keypad is battery-powered (6V) with a 12–24V receiver. - [Universal Remote Receiver 433Mhz CX-RU433](https://connixtech.co.nz/product/universal-remote-receiver-433mhz-cx-ru433/): The CX-RU433 is a 433MHz universal receiver that adds remote control to gate operators, garage doors and alarm systems. Its two relay channels can control two separate devices, and it learns both fixed-code and rolling-code remotes for maximum compatibility — storing up to 100 handsets. Powered by 12V DC or 24V AC/DC in a compact plastic enclosure, it's a flexible, reliable retrofit receiver. - [Garage Remote Holder CX-RH01](https://connixtech.co.nz/product/garage-remote-holder-cx-rh01/): The CX-RH01 is a stainless-steel visor clip that keeps your garage or gate remote secure and within easy reach. Sized to fit most remotes between 4.6cm and 6.5cm tall, it holds the remote firmly while leaving the buttons accessible, preventing it from being lost or damaged in the vehicle. No tools required to fit. - [24V AC-DC Converter CX-PSC12V](https://connixtech.co.nz/product/24v-ac-dc-converter-cx-psc12v/): The CX-PSC12V is a compact AC-to-DC converter that steps 24V AC input down to a regulated 12V DC output — handy for powering gate automation, access control, CCTV and security devices that require 12V DC. Housed in a sealed plastic enclosure for reliable continuous operation, it's quick and easy to install. - [125KHZ Read Only RFID Tag CX-EMC01](https://connixtech.co.nz/product/125khz-read-only-rfid-tag-cx-emc01/): The CX-EMC01 is a 125kHz read-only RFID proximity tag for access control and identification. Contactless and battery-free, it works with any standard 125kHz proximity reader and is housed in a compact, lightweight ABS body that's easy to carry on a keyring. Ideal for doors, gates, offices, apartments and commercial access-control systems. - [Steel Pyramid Post Cap 75mm CX-SCP75](https://connixtech.co.nz/product/steel-pyramid-post-cap-75mm-cx-scp75/): The CX-SCP75 is a steel pyramid post cap designed to suit 75 × 75mm square posts. Its stylish pyramid profile gives a clean, professional finish while protecting the post from water ingress, rust and debris. Made from heavy-duty steel with a durable black powder-coated finish for weather resistance, it installs in seconds with a simple push-fit — suitable for residential, commercial and industrial fencing and gates. - [Hikvision 6MP AcuSense Motorised Varifocal Dome Network Camera - DS-2CD2766G2T-IZS](https://connixtech.co.nz/product/hikvision-6mp-acusense-motorised-varifocal-dome-network-camera-ds-2cd2766g2t-izs/): The Hikvision DS-2CD2766G2T-IZS is a 6MP AcuSense motorised varifocal dome that lets you set the exact field of view remotely — 2.8–12mm zoom and focus adjusted from software, no ladder required. AcuSense AI classifies people and vehicles to reduce false alerts, with 40m Smart IR night vision and 120dB WDR. Vandal-resistant to IK10 and weatherproof to IP67, it includes audio and alarm I/O and efficient H.265+ storage. - [Hikvision 8MP Smart Hybrid Light ColorVu Bullet with Strobe & Audio Alarm DS-2CD2T87G2H-LISU-SL](https://connixtech.co.nz/product/hikvision-8mp-smart-hybrid-light-colorvu-bullet-with-strobe-audio-alarm-ds-2cd2t87g2h-lisu-sl/): The Hikvision DS-2CD2T87G2H-LISU-SL is an 8MP (4K) ColorVu bullet camera with 24/7 full-colour imaging and active deterrence. Smart Hybrid Light reaches up to 60m in IR or white, while a built-in strobe and audio alarm — plus two-way audio — warn off and engage intruders. AcuSense AI classifies people and vehicles, an F1.0 aperture and 130dB WDR handle low light and contrast, and the housing is rated IP67 for long-range outdoor coverage. - [Hikvision 6MP AcuSense Fixed Turret Network Camera (Black) - DS-2CD2366G2-IU-BLK](https://connixtech.co.nz/product/hikvision-6mp-acusense-fixed-turret-network-camera-black-ds-2cd2366g2-iu-blk/): The Hikvision DS-2CD2366G2-IU-BLK is the black-finish version of Hikvision's 6MP AcuSense fixed-turret camera, ideal where a discreet housing suits the building. AcuSense deep-learning AI limits alerts to people and vehicles, while the 1/2.4″ sensor and 2.8/4/6mm fixed lens capture 3200×1800 detail. Includes 30m Smart IR, 120dB WDR and a built-in microphone, rated IP67 with H.265+ storage and PoE power. - [Hikvision 6MP AcuSense Fixed Turret Network Camera - DS-2CD2366G2-IU](https://connixtech.co.nz/product/hikvision-6mp-acusense-fixed-turret-network-camera-ds-2cd2366g2-iu/): The Hikvision DS-2CD2366G2-IU is a 6MP AcuSense fixed-turret IP camera that uses deep-learning AI to trigger alerts on people and vehicles only, cutting false alarms from wind, rain or animals. A 1/2.4″ sensor and choice of 2.8/4/6mm fixed lens deliver sharp 3200×1800 images, with 30m Smart IR night vision, 120dB WDR for high-contrast scenes and a built-in microphone for audio. Rated IP67 with efficient H.265+ storage; PoE-powered. - [Hikvision 8MP AcuSense Fixed Bullet Network Camera Black - DS-2CD2T86G2-2I](https://connixtech.co.nz/product/hikvision-8mp-acusense-fixed-bullet-network-camera-black-ds-2cd2t86g2-2i/): The Hikvision DS-2CD2T86G2-2I is an 8MP (4K) AcuSense fixed bullet camera in a black housing, built for long-range outdoor coverage. AcuSense deep-learning AI limits alerts to people and vehicles, while 60m Smart IR delivers reliable long-distance night vision. The 1/1.8″ sensor and 2.8/4/6mm fixed lens capture 4K detail, with 120dB WDR for high-contrast scenes, rated IP67 and using efficient H.265+ storage. - [Hikvision 4MP Smart Hybrid Light ColorVu Fixed Turret Network Camera (Black) - DS-2CD2347G3-LI2UY-BLK](https://connixtech.co.nz/product/hikvision-4mp-smart-hybrid-light-colorvu-fixed-turret-network-camera-black-ds-2cd2347g3-li2uy-blk/): The Hikvision DS-2CD2347G3-LI2UY-BLK is the black-finish version of Hikvision's 4MP ColorVu turret, delivering 24/7 full-colour imaging in a discreet housing. Its F1.0 lens and Smart Hybrid Light (IR or white to 30m) suit any lighting, and AcuSense AI triggers only on people and vehicles. Includes 130dB WDR, a built-in dual microphone and IP67 weatherproofing with efficient H.265+ storage. - [Hikvision 4MP Smart Hybrid Light ColorVu Fixed Turret Network Camera - DS-2CD2347G3-LI2UY](https://connixtech.co.nz/product/hikvision-4mp-smart-hybrid-light-colorvu-fixed-turret-network-camera-ds-2cd2347g3-li2uy/): The Hikvision DS-2CD2347G3-LI2UY is a 4MP ColorVu turret that captures vivid 24/7 full-colour footage, even at night. An F1.0 super-aperture lens and Smart Hybrid Light (IR or white, up to 30m) let you choose discreet mono or full-colour night imaging, while AcuSense AI limits alerts to people and vehicles. 130dB WDR handles harsh contrast, a built-in dual microphone captures audio, and it's rated IP67 with H.265+ storage. - [Hikvision 8MP AcuSense Turret with Strobe Light & Audio Alarm - DS-2CD2386G2-ISU-SL](https://connixtech.co.nz/product/hikvision-8mp-acusense-turret-with-strobe-light-audio-alarm-ds-2cd2386g2-isu-sl/): The Hikvision DS-2CD2386G2-ISU-SL is an 8MP (4K) AcuSense turret with active deterrence — a strobe light and audible alarm that warn off intruders on detection, plus two-way audio to listen and respond. AcuSense AI classifies people and vehicles to cut false alerts, and the 1/1.8″ sensor delivers 4K detail through a 2.8/4/6mm fixed lens. Includes 30m Smart IR, 120dB WDR and alarm/audio I/O, rated IP67. - [Hikvision 6MP AcuSense Turret with Strobe Light & Audio Alarm - DS-2CD2366G2-ISU-SL](https://connixtech.co.nz/product/hikvision-6mp-acusense-turret-with-strobe-light-audio-alarm-ds-2cd2366g2-isu-sl/): The Hikvision DS-2CD2366G2-ISU-SL is a 6MP AcuSense turret with active deterrence — a built-in strobe light and audible alarm that warn off intruders the moment they're detected. Two-way audio (built-in mic and speaker) lets you listen and respond, while AcuSense AI classifies people and vehicles to trigger only on real threats. Features a 2.8/4/6mm fixed lens, 30m Smart IR, 120dB WDR and alarm/audio I/O, rated IP67. - [Hikvision 6MP AcuSense Motorised Varifocal Dome Network Camera - DS-2CD3766G2HT-LIZSUY](https://connixtech.co.nz/product/hikvision-6mp-acusense-motorised-varifocal-dome-network-camera-ds-2cd3766g2ht-lizsuy/): The Hikvision DS-2CD3766G2HT-LIZSUY is a 6MP AcuSense motorised varifocal dome with a 2.7–13.5mm remote zoom and focus, so you can dial in the exact coverage from software. AcuSense AI targets people and vehicles to cut false alerts, backed by 40m Smart IR and 120dB WDR. Built tough with IP67 weatherproofing and IK10 vandal resistance, it includes audio and alarm I/O and efficient H.265+ storage. - [8 Core Alarm Cable 0.5mm2 - AV-8C5T-250](https://connixtech.co.nz/product/8-core-alarm-cable-0-5mm2-av-8c5t-250/): AVTRON AV-8C5T-250 is an 8-core stranded security cable supplied on a 250m roll for larger installations. Each 0.5mm² conductor is tinned CCA for reliable, low-resistance connections, and the colour-coded cores speed up termination. A flexible white PVC jacket (5.9mm dia.) makes it easy to run. Ideal for alarm and intruder systems, access control, keypads, readers and electronic locks. - [8 Core Alarm Cable 0.5mm2 - AV-8C5T-100](https://connixtech.co.nz/product/8-core-alarm-cable-0-5mm2-av-8c5t-100/): AVTRON AV-8C5T-100 is an 8-core stranded security cable on a 100m roll. Each 0.5mm² conductor is tinned CCA for low-resistance, reliable connections, with colour-coded cores that speed up termination and a flexible white PVC jacket (5.9mm dia.). Suits keypads, readers, electronic locks, access control and alarm wiring. - [4 Core Alarm Cable 0.22sq.mm 250M AV-4C2T-250](https://connixtech.co.nz/product/4-core-alarm-cable-0-22mm2-av-4c2t-250/): AVTRON AV-4C2T-250 is a 4-core stranded security cable supplied on a 250m roll for larger installations. Each 0.22mm² conductor is tinned CCA for dependable connections, with colour-coded cores for fast termination and a flexible white PVC jacket (3.7mm dia.). Ideal for alarm and intruder systems, PIR sensors, door contacts, keypads and readers. - [4 Core Alarm Cable 0.22sq.mm 100M - AV-4C2T-100](https://connixtech.co.nz/product/4-core-alarm-cable-0-22mm2-av-4c2t-100/): AVTRON AV-4C2T-100 is a 4-core stranded security cable on a 100m roll. Each 0.22mm² conductor is tinned CCA for reliable connections, with colour-coded cores to speed up termination and a flexible white PVC jacket (3.7mm dia.) that's easy to run. Ideal for alarm and intruder systems — PIR sensors, door contacts, keypads and readers. - [AV-HD150-NE 150M HDMI KVM Extender](https://connixtech.co.nz/product/av-hd150-ne-150m-hdmi-kvm-extender/): The AVTRON AV-HD150-NE is an HDMI KVM extender that sends HD video, plus USB keyboard and mouse, up to 150m over a single Cat6 cable. It supports point-to-point or cascade connection, carries IR remote control back to the source, and handles resolutions up to 1080P. Low power draw and plug-and-play setup make it a straightforward way to relocate a display and its controls away from the source equipment. - [HiLook NVR-232MH-K-16P 32CH NVR Dual HDD Bay](https://connixtech.co.nz/product/hilook-nvr-232mh-k-16p-32ch-nvr-dual-hdd-bay/): The HiLook NVR-232MH-K-16P is a 32-channel 4K PoE NVR built for larger commercial systems. A built-in 16-port PoE switch powers and connects cameras directly, while two SATA HDD bays (up to 16TB each) provide generous storage managed efficiently by H.265+ compression. It supports up to 12MP recording, VCA analytics including motion, tripwire and intrusion, two-way audio and third-party ONVIF cameras, with 4K HDMI and VGA outputs for local monitoring. - [Single Channel Relay Keypad & Reader Outdoor/Indoor CX-1C-KP](https://connixtech.co.nz/product/single-channel-relay-keypad-reader-outdoor-indoor-cx-1c-kp/): The CX-1C-KP is a single-channel access-control keypad and 125kHz proximity reader for indoor or outdoor use, rated IP66 and rated to operate from −40°C to 60°C. It supports access by card, PIN (4–6 digits) or card+PIN for up to 1,100 users, with a single relay to drive a lock, strike or gate and a latch mode to hold it open. Wiegand 26-bit in/out lets it also act as a reader for a separate controller. Powered by 12–28V AC/DC. - [AVTRON 8" 5/10 Watt Ceiling Speaker - AP-C181](https://connixtech.co.nz/product/avtron-8-5-10-watt-ceiling-speaker-ap-c181/): The AVTRON AP-C18 is an 8″ full-range ceiling speaker for 100V line systems, delivering richer bass than smaller 6″ models. Selectable 5W/10W power taps make it easy to design into distributed audio, and the 100V line suits long cable runs across large rooms, open spaces, cafés, retail and hospitality venues. A 100Hz–18kHz response and 92dB sensitivity give clear music and voice reproduction, while the flush-mount ABS enclosure (210mm cut-out) keeps a low visual profile. - [CX-PoE104E-M PoE 1 in 4 Out Extender Metal Indoor](https://connixtech.co.nz/product/cx-poe104e-m-poe-1-in-4-out-extender-metal-indoor/): The CX-PoE104E-M is a 1-in, 4-out PoE extender in a durable metal enclosure for indoor use. It takes a single PoE input and distributes power and data to four IEEE 802.3af/at devices at 100Mbps, with built-in surge protection. Plug-and-play with no configuration required — a simple, cost-effective way to expand a PoE camera or network run. - [CX-PoE102E-M PoE 1 in 2 Out Extender Metal Indoor](https://connixtech.co.nz/product/cx-poe102e-m-poe-1-in-2-out-extender-metal-indoor/): The CX-PoE102E-M is a 1-in, 2-out PoE extender in a rugged metal enclosure for indoor installations. It passes up to 30W (25.5W across two intelligently-assigned outputs) to IEEE 802.3af/at devices at 100Mbps, with 2kV surge protection. Plug-and-play with no configuration, it's an easy way to extend PoE runs and power two devices from a single input. - [CX-PoE102E PoE 1 in 2 Out Extender Waterproof](https://connixtech.co.nz/product/cx-poe102e-poe-1-in-2-out-extender-waterproof/): The CX-PoE102E is a weatherproof PoE extender that takes one PoE input and splits it to two PoE outputs, ideal for expanding a camera network without extra power supplies. It delivers up to 30W (25.5W across the two intelligently-assigned outputs) to IEEE 802.3af/at devices at 100Mbps, with 2kV surge protection and an IP66 enclosure for outdoor installation. Plug-and-play — no configuration required. - [Dahua 8MP Smart Dual Light WizSense Fixed IP Camera - DH-IPC-HDW3867EM-S-IL-ANZ](https://connixtech.co.nz/product/dahua-8mp-smart-dual-light-wizsense-fixed-ip-camera-dh-ipc-hdw3867em-s-il-anz/): The Dahua DH-IPC-HDW3867EM-S-IL-ANZ is an 8MP (4K) WizSense fixed-turret IP camera for high-resolution 24/7 surveillance. Its 1/2.7″ sensor and 2.8mm lens capture 8MP detail at up to 30fps, while Smart Dual-Light illumination provides up to 30m of IR or warm-light night vision. 120dB True WDR handles harsh backlighting, and WizSense AI with SMD 4.0 delivers accurate human/vehicle tripwire and intrusion detection. Rated IP67 and PoE-powered for a simple single-cable install. - [DS-KABV6113-RS Rain Shield](https://connixtech.co.nz/product/ds-kabv6113-rs-rain-shield/): Surface-mount rain shield for Hikvision KV6103 and KV6113 series villa door stations, moulded in PC plastic. Keeps run-off off the camera and call button and shades the lens against low sun. Rated -40°C to 60°C. - [Dahua 16 Channel 8 6MP Cameras IP CCTV Kit - DH-KIT16C6M8-4T](https://connixtech.co.nz/product/dahua-16-channel-8-camera-ip-cctv-kit-dh-kit16c86m-4t/): Dahua 16 Channel 8 Camera IP CCTV Kit – DH-KIT16C86M-4T is a professional AI-powered surveillance solution featuring 8 × 6MP Dahua HDW3667 WizSense IP cameras and a 16-channel NVR4216-16P-AI/ANZ AI NVR with 4TB storage and built-in 16-port PoE. The system provides high-resolution imaging, intelligent facial detection and recognition, perimeter protection and Smart Motion Detection (SMD) for enhanced security and reduced false alarms. With 2 HDD bays supporting up to 20TB per HDD, the NVR offers expandable storage for extended 24/7 recording. Ideal for residential, commercial and industrial security applications. - [Dahua 8 Channel 4 Camera IP CCTV Kit - DH-KIT8C6M4-2T](https://connixtech.co.nz/product/dahua-8-channel-4-camera-ip-cctv-kit-dh-kit8c46m-2t/): A complete plug-and-play surveillance solution, the Dahua DH-KIT8C46M-2t pairs an 8-channel PoE NVR with four 6MP dual-light cameras — an ideal entry-level system for homes and small business. Power-over-Ethernet means a single cable per camera, while AI human/vehicle classification and Smart Motion Detection cut false alerts. Each camera delivers 6MP clarity, 120dB True WDR and 30m white-light + IR night vision, rated IP67. Includes a 2TB HDD (expandable to 20TB) and free DMSS remote monitoring. - [Western Digital Purple 4TB Surveillance Hard Drive - WD44PURZ](https://connixtech.co.nz/product/western-digital-purple-4tb-surveillance-hard-drive-wd44purz/): Western Digital Purple 4TB surveillance-grade hard drive for continuous 24/7 DVR and NVR recording applications. - [Western Digital Purple 6TB Surveillance Hard Drive - WD64PURZ](https://connixtech.co.nz/product/western-digital-purple-6tb-surveillance-hard-drive-wd64purz-hik/): Western Digital Purple 6TB surveillance hard drive for 24/7 NVR/DVR recording, optimised for Hikvision systems. - [Western Digital Purple 2TB Surveillance Hard Drive - WD23PURZ](https://connixtech.co.nz/product/western-digital-purple-2tb-surveillance-hard-drive-wd23purz/): Western Digital Purple 2TB surveillance hard drive, purpose-built for 24/7 DVR/NVR recording with AllFrame technology. - [Seagate SkyHawk AI 8TB Surveillance Hard Drive - ST8000VE001](https://connixtech.co.nz/product/seagate-skyhawk-ai-8tb-surveillance-hard-drive-st8000ve001/): Seagate SkyHawk AI 8TB surveillance HDD with AI-optimised workload handling for smart NVR systems supporting up to 64 camera streams. - [Seagate SkyHawk 4TB Surveillance Hard Drive - ST4000VX016](https://connixtech.co.nz/product/seagate-skyhawk-4tb-surveillance-hard-drive-st4000vx016/): Seagate SkyHawk 4TB surveillance-grade hard drive optimised for 24/7 CCTV recording with up to 64 camera streams. - [Hilook Wired Internal 18m PIR Motion Detector - HA-ALARM-PIR1](https://connixtech.co.nz/product/hilook-wired-internal-18m-pir-motion-detector-ha-alarm-pir1/): Hilook wired internal PIR motion detector with 18m detection range for use with compatible alarm panels. - [Hilook Wired Alarm Kit - HA-ALARM-KIT2](https://connixtech.co.nz/product/hilook-wired-alarm-kit-ha-alarm-kit2/): HiLook wired alarm kit with four detectors for larger homes and small commercial premises, giving multi-zone coverage from one panel. Keypad arming, siren and key fob control included, and expandable with additional sensors. - [Hilook Alarm Starter Kit - HA-ALARM-KIT1](https://connixtech.co.nz/product/hilook-wired-alarm-starter-kit-hybrid-wired-wireless-security-system-nz/): HiLook starter alarm kit built around an 8-zone wired panel that expands to 32 wireless zones by receiver. Ships with an LCD keypad, indoor and outdoor sirens and key fob control, with app and web programming for small business sites. - [Hilook IP Video Intercom Kit - HA-KIT-IP1](https://connixtech.co.nz/product/hilook-ip-video-intercom-kit-ha-kit-ip1/): Hilook IP-based video intercom kit with app connectivity for remote door answering and access management. - [Hilook 4-Wire Video Intercom Kit - HA-KIT-A2](https://connixtech.co.nz/product/hilook-4-wire-video-intercom-kit-ha-kit-a2/): Hilook 4-wire video intercom kit for residential door entry with video verification and remote door release. - [Hilook 2-Wire Hybrid Video Intercom Kit - HA-KIT-PY2](https://connixtech.co.nz/product/hilook-2-wire-hybrid-video-intercom-kit-ha-kit-py2/): Complete HiLook 2-wire video intercom kit with a 7-inch touchscreen monitor and IP65 outdoor panel at 2MP. Runs over existing two-core or coax cable, so an older intercom can be replaced without rewiring, and expands to multiple monitors. - [Hilook 16 Channel NVR with Dual HDD Bay - NVR-216MH-C-16P-D](https://connixtech.co.nz/product/hilook-16-channel-nvr-with-dual-hdd-bay-nvr-216mh-c-16p-d/): Hilook 16-channel NVR with dual HDD bays and 16-port PoE switch for larger commercial surveillance installations. - [Hilook 8 Channel PoE NVR with 4TB HDD - NVR-108MH-C-8P-4TB](https://connixtech.co.nz/product/hilook-8-channel-poe-nvr-with-4tb-hdd-nvr-108mh-c-8p-4tb/): Hilook 8-channel PoE NVR pre-installed with a 4TB hard drive, ready for immediate recording out of the box. - [Hilook 4 Channel PoE NVR with 2TB HDD - NVR-104MH-C-4P-2TB](https://connixtech.co.nz/product/hilook-4-channel-poe-nvr-with-2tb-hdd-nvr-104mh-c-4p-2tb/): The HiLook NVR-104MH-C-4P-2TB is a 4-channel 4K PoE NVR supplied ready to record with a pre-installed 2TB HDD (expandable to 8TB) — no extra drive to buy. A built-in 4-port PoE powers and connects your IP cameras over single cables, and H.265+ compression maximises retention. Fanless for silent operation, it supports up to 8MP recording plus smart analytics including perimeter protection and works with third-party ONVIF cameras. - [Hilook 8 Channel PoE NVR K Series - NVR-108MH-K/4P-B](https://connixtech.co.nz/product/hilook-8-channel-poe-nvr-k-series-nvr-108mh-k-4p-b/): Hilook 8-channel K Series PoE NVR with built-in 4-port PoE switch, supporting H.265+ and up to 8MP resolution. - [Hilook 4 Channel PoE NVR K Series - NVR-104MH-K/4P-B](https://connixtech.co.nz/product/hilook-4-channel-poe-nvr-k-series-nvr-104mh-k-4p-b/): Hilook 4-channel PoE NVR K Series with built-in 4-port PoE switch, supporting H.265+ and up to 8MP resolution. - [Hilook Pro 6MP Smart All-in-One IP Turret Camera - IPC-T269H-MU-SL](https://connixtech.co.nz/product/hilook-6mp-smart-all-in-one-ip-turret-camera-ipc-t269h-mu-sl/): Hilook 6MP Smart All-in-One turret IP camera with built-in speaker, strobe light, and AcuSense AI for active deterrence. - [Hilook Dual Lens 180 Degree 4K 8MP Panoramic Turret Camera - IPC-T289PH-MU-SL](https://connixtech.co.nz/product/hilook-dual-lens-180-degree-4k-8mp-panoramic-turret-camera-ipc-t289ph-mu-sl/): Hilook dual-lens 180-degree panoramic 4K 8MP turret IP camera for wide-area coverage with active deterrence. - [AVTRON IP Network Audio System Software - AP-IP600SF](https://connixtech.co.nz/product/avtron-ip-network-audio-system-software-ap-ip600sf/): The AP-IP600SF is the server application behind an AVTRON IP network audio and public address system, running on Windows from 2000 through to Windows 10. A built-in weekly timer handles scheduled programme — school bells, shift changes, opening and closing announcements, background music windows — without a separate scheduling appliance. The built-in audio encoder prepares source material for distribution across the network. The interface is presented entirely in English, which is not universally true of PA management software from this segment and makes a meaningful difference to commissioning and handover. Audio runs at 8kHz-44.1kHz 16-bit with transmission from 8kbps to 320kbps in MP2, MP3, PCM and ADPCM, achieving signal-to-noise of 90dB or better across 20Hz-20kHz with data delay around 30 milliseconds over standard 10/100Mbps networking. - [AVTRON 30W Outdoor Music Horn Speaker - AP-H30](https://connixtech.co.nz/product/avtron-30w-outdoor-music-horn-speaker-ap-h30/): The AP-H30 is an outdoor horn built for both paging and music, which is a harder brief than paging alone — most horns are voice-only devices that make music sound thin. An IP66 rating covers heavy rain and dust, and the UV-protected ABS body resists the sun exposure that turns lesser plastics chalky and brittle within a few New Zealand summers. Power taps at 7.5W, 15W and 30W plus 8 ohm operation let an installer set output per position — full power on an open field, lower on a walkway where the same level would be uncomfortable. Line input accepts 100V or 70V, and the supplied stainless mounting bracket in grey allows quick installation and holds aim. It suits schools, hotels, airports and other sites needing long-distance outdoor coverage. - [AVTRON 35W Explosion Proof EN54 Horn Speaker - AP-H135EX](https://connixtech.co.nz/product/avtron-35w-explosion-proof-en54-horn-speaker-ap-h135ex/): The AP-H135EX is the highest-output explosion proof horn in AVTRON's range at 35W RMS with 50W maximum handling, for the largest hazardous areas. Zone 0, 1 and 2 certification covers explosive gas mixture atmospheres across all three risk classifications, and EN54 compliance allows its use in voice evacuation systems. Sensitivity is 101dB at 1W/1M with maximum output to 105dB across a 250Hz-8kHz response, concentrating energy in the speech band where intelligibility over plant noise is decided. Line input is 70V or 100V. The stainless steel enclosure measures 140 x 290 x 205mm at under 5.5kg with a dust cover, mounting to wall, pole, ceiling or shade structure on a U-shaped bracket. - [AVTRON 25W Explosion Proof EN54 Horn Speaker - AP-H125EX](https://connixtech.co.nz/product/avtron-25w-explosion-proof-en54-horn-speaker-ap-h125ex/): The AP-H125EX is rated for Zone 0, 1 and 2 explosive gas mixture atmospheres — the classification that covers areas where a flammable atmosphere is present continuously, occasionally or only under fault conditions. That rating, combined with EN54 compliance for voice evacuation, makes it suitable as the announcement and alarm speaker on hazardous industrial sites rather than requiring separate devices for each duty. Output is 25W RMS at 101dB sensitivity (1W/1M) with maximum output to 105dB, across a 250Hz-8kHz response tuned for speech carrying over plant noise. Line input accepts 70V or 100V. The stainless steel enclosure measures 300mm diameter x 420mm at under 6kg with a dust cover, mounting on a U-shaped bracket to wall, pole, ceiling or shade structure. - [AVTRON 15W Explosion Proof EN54 Horn Speaker - AP-H115EX](https://connixtech.co.nz/product/avtron-15w-explosion-proof-en54-horn-speaker-ap-h115ex/): The AP-H115EX is specified where an ordinary speaker is a hazard: fuel storage, chemical processing, gas handling and similar sites where an electrical fault could ignite the atmosphere around it. EXd explosion proof construction contains any internal ignition within the housing, and EN54 compliance covers its use as part of a voice evacuation system — the two requirements that usually have to be met together on industrial sites. Output reaches 115dB at 1W/1M, unusually high even for a horn, which is what allows announcements to carry over plant machinery. Response covers 350Hz-10kHz, focused entirely on speech intelligibility. Rated 25W maximum with 15W and 10W taps on 70V or 100V line. The stainless steel enclosure measures 250mm diameter x 315mm at under 4kg with a dust cover, mounting to wall, pole, ceiling or shade structure on a U-shaped bracket. - [AVTRON 20W 360 Degree Radial Garden Speaker - AP-G61](https://connixtech.co.nz/product/avtron-20w-360-degree-radial-garden-speaker-ap-g61/): The AP-G61 radiates through a full 360 degrees, so a single unit covers the area around it evenly rather than aiming sound in one direction. That makes it the efficient choice for the centre of a courtyard, a seating area or a path junction, where a directional speaker would need pairing with a second unit facing the other way. The 5-inch full-range polypropylene woofer covers 80Hz-10kHz at 90dB sensitivity with maximum output to 102dB — a speech-and-background-music balance rather than a full hi-fi range. Taps are 20W and 10W on 70V or 100V line. The UV-protected fibreglass enclosure in natural green is IP66 rated with dust protection, measuring 230 x 220 x 220mm at under 5kg for ground or floor fixing. - [AVTRON 20W Mushroom Shaped Outdoor Garden Speaker - AP-G60](https://connixtech.co.nz/product/avtron-20w-mushroom-shaped-outdoor-garden-speaker-ap-g60/): The AP-G60 takes the mushroom form used in landscape lighting, in green so it reads as part of the planting rather than as installed hardware. Its upward-and-outward radiation pattern spreads sound across a wider area than a forward-facing speaker, which suits open lawns and garden areas where listeners are not in any fixed position. Response covers 80Hz-18kHz with 92dB sensitivity and maximum output to 104dB — the widest range of the three garden models, making it the pick where music quality matters most. Taps are 20W and 10W on 70V or 100V line. The UV-protected fibreglass enclosure is IP66 rated with dust protection, measuring 430mm high x 400mm diameter at under 5kg for ground or floor fixing. - [AVTRON 30W Rock Shaped Outdoor Garden Speaker - AP-G59](https://connixtech.co.nz/product/avtron-30w-rock-shaped-outdoor-garden-speaker-ap-g59/): The AP-G59 is designed to disappear into a landscape. The rock form and natural black granite finish let it sit in a planted bed or along a path without reading as audio equipment, which is the whole point in gardens, courtyards and hospitality grounds. A 6.5-inch full-range waterproof polypropylene woofer covers 80Hz-16kHz — genuine hi-fi range rather than the speech-only response of a paging horn — so it carries music properly in an open outdoor space. The UV-protected fibreglass enclosure and IP66 rating handle permanent outdoor exposure including sun, rain and dust, and the unit fixes to the ground or sits on a floor surface. Rated 30W on 70V or 100V line with 90dB sensitivity and maximum output to 102dB. It measures 280 x 300 x 400mm at under 6kg. - [AVTRON 15W PoE IP Network Wall Speaker - AP-EW15P](https://connixtech.co.nz/product/avtron-15w-poe-ip-network-wall-speaker-ap-ew15p/): The AP-EW15P is the wall-mount member of the AVTRON PoE speaker family, for rooms where there is no ceiling void to work with — exposed-services fit-outs, warehouses, corridors with solid soffits. A genuine two-way design with a 5-inch woofer and 1.5-inch tweeter gives it more range than the single-driver units in this class, which matters when the same speaker carries both speech and background music. Network decoding and a 15W RMS Class D amplifier (20W peak) are built in, powered over 802.3af or 802.3at, with 12V DC as an alternative. Speakers group or address individually from the server. Sensitivity is 92dB at 1W/1M across 100Hz-18kHz ±3dB, distortion at or under 1%, signal-to-noise 85dB or better. The UV-protected ABS body with black or white metal grille measures 170 x 260 x 190mm at under 2.8kg, rated -30°C to 55°C. - [AVTRON 15W PoE IP Network Horn Speaker - AP-EH15P](https://connixtech.co.nz/product/avtron-15w-poe-ip-network-horn-speaker-ap-eh15p/): The AP-EH15P covers the outdoor and industrial areas that ceiling speakers cannot: yards, loading docks, car parks, plant areas. Amplifier and network decoder are built in, so it needs only a network cable carrying PoE. Both 802.3af and 802.3at are supported, and the horn can be grouped with other endpoints or addressed on its own from the system server. The aluminium U-shaped bracket allows wall or pole mounting and holds aim once set, which matters for a horn where coverage depends on where it points. Sensitivity is 92dB at 1W/1M with response from 100Hz-18kHz ±3dB, distortion at or under 1% and signal-to-noise of 85dB or better. The white-finished aluminium unit measures 290 x 280 x 210mm at under 2.2kg and operates from -30°C to 55°C. - [AVTRON 10W PoE IP Network Ceiling Speaker - AP-EC10P](https://connixtech.co.nz/product/avtron-10w-poe-ip-network-ceiling-speaker-ap-ec10p/): The AP-EC10P collapses an entire audio chain into a ceiling tile: network decoder, Class D amplifier and 6-inch full-range driver in one unit, fed by a single Cat cable. Because it accepts both 802.3af and 802.3at, it works with the switches already in most buildings. Adding a zone means patching a port, not pulling 100V speaker line back to a plant room — the reason this approach wins in fit-outs and heritage buildings. Speakers can be assigned to groups or addressed individually from the system server, so a single ceiling speaker is its own zone if the site needs it to be. Rated 6W RMS with 10W peak at 92dB SPL (1W/1M), response runs 100Hz-18kHz ±3dB with distortion at or under 1% and signal-to-noise of 85dB or better. The 200mm white ABS enclosure with metal grille needs a 165mm cutout, weighs under 1.5kg, and is rated -30°C to 55°C. - [AVTRON Wired Conference Delegate Unit - AP-DU33](https://connixtech.co.nz/product/avtron-wired-conference-delegate-unit-ap-du33/): The AP-DU33 is the delegate position in an AVTRON wired conference system. Each seat gets its own gooseneck microphone and a 1W monitor speaker with local volume, so participants hear the floor clearly without raising overall room level and risking feedback. The capsule picks up speech from 20cm to 120cm across a 40Hz-16kHz response, giving delegates room to move while speaking. Earphone and lapel connections are provided for private listening or interpretation feeds. The 60 x 130 x 155mm tabletop housing chains to the AP-CS31 main controller, and units can be added as the room grows up to the controller's capacity. - [AVTRON Phantom Power Gooseneck Desktop Microphone - AP-DP204](https://connixtech.co.nz/product/avtron-phantom-power-gooseneck-desktop-microphone-ap-dp204/): The AP-DP204 is the phantom-powered desktop microphone in the AVTRON range, aimed at fixed announcement and paging desks where the gooseneck stays where it is put and the operator needs a clear press-to-talk position. Running on 48V phantom power, with a 3V DC alternative for panels that cannot supply phantom, it suits both modern mixer amplifiers and older installed systems. The uni-directional capsule keeps pickup on the operator and away from a busy control room. Sensitivity is -29dB at 150 ohms unbalanced, and the 3m cable gives useful reach across a desk to a rack or wall plate. The unit weighs 0.56kg. - [AVTRON Dual Capsule Condenser Desktop Microphone - AP-DP202](https://connixtech.co.nz/product/avtron-dual-capsule-condenser-desktop-microphone-ap-dp202/): The AP-DP202 is the condenser option in the AVTRON desktop range, for rooms where a dynamic capsule does not give enough reach or detail. Dual capsules and a super-cardioid pattern tighten pickup on the speaker and hold off room reflections in reverberant spaces. Red LED indicators show live status to the person speaking and to anyone watching from across the table, which matters in council and broadcast-adjacent settings where an open microphone has consequences. Response covers 40Hz-18kHz at 75 ohms, running on 48V phantom power from the mixer or paging panel. The flexible gooseneck holds position, and the unit weighs under 900g with a 1.5m lead to an unbalanced XLR connector. - [AVTRON Gooseneck Desktop Paging Microphone - AP-DP200](https://connixtech.co.nz/product/avtron-gooseneck-desktop-paging-microphone-ap-dp200/): The AP-DP200 is the standard desktop microphone for AVTRON paging and PA positions. The dynamic capsule needs no phantom power, which keeps it compatible with basic mixer amplifiers and older paging panels already in service. A cardioid pattern rejects sound from behind the microphone, so an operator can page from a busy reception or control desk without pulling in the room. The flexible gooseneck holds its position once set, and the on/off switch gives local control over an open channel. Response runs 50Hz-12kHz at 200 ohms with a 1.5m cable to an unbalanced XLR connector, and the unit weighs under 1kg. - [AVTRON 8 Zone 500W EVAC Extension Router - AP-D850RT](https://connixtech.co.nz/product/avtron-8-zone-500w-evac-extension-router-ap-d850rt/): The AP-D850RT is the highest-capacity extension router in the EVAC digital range, adding eight zones of 500W amplification to an existing voice alarm system. Routers cascade to a total system capacity of 120 zones, letting a large estate expand on one architecture without replacing the control equipment. Each zone runs A and B speaker lines with low impedance monitoring, and message storage holds up to 255 MP3 or WMA recordings on SD card or via the player. Eight programmable control inputs and outputs, plus fault, EVAC and reset contacts, connect to fire and building systems, with a log retaining 1000 records over ten years. Speaker output is 100V across A/B eight zone lines at 80Hz-20kHz with signal-to-noise better than 70dB. Power is 200-260V AC with 24V DC backup at 550W. - [AVTRON 500W 8 Zone Voice Alarm Controller - AP-D850EV](https://connixtech.co.nz/product/avtron-500w-8-zone-voice-alarm-controller-ap-d850ev/): The AP-D850EV is the largest voice alarm controller in AVTRON's EVAC digital range, combining eight supervised zones with 500W of Class D amplification. It suits multi-storey and high-occupancy buildings where both zone count and speaker load are substantial — hospitals, large schools, shopping centres and transport facilities. All eight zones run A and B speaker lines with low impedance monitoring for continuous circuit supervision. Up to 255 MP3 or WMA messages are stored on SD card for staged and zone-specific evacuation announcements. Eight programmable control inputs and outputs plus fault, EVAC and reset contacts integrate with fire detection. The log holds 1000 records across ten years. Inputs cover balanced mic/line, RCA and a fireman's microphone, with 100V speaker output at 80Hz-20kHz. Power is 200-260V AC with 24V DC backup at 550W. - [AVTRON 8 Zone 240W EVAC Extension Router - AP-D824RT](https://connixtech.co.nz/product/avtron-8-zone-240w-evac-extension-router-ap-d824rt/): The AP-D824RT adds eight supervised zones with 240W of Class D amplification to an EVAC voice alarm system. Eight zones per router rather than six means fewer units to reach a given zone count — worth considering on multi-storey buildings where zone counts climb quickly and rack space does not. Each zone runs A and B speaker lines with low impedance monitoring, and routers cascade to a maximum system capacity of 120 zones with up to 32 remote paging microphones across the system. It pairs with the AP-D824EV controller so output rating and zone structure stay consistent as the installation expands. - [AVTRON 240W 8 Zone Voice Alarm Controller - AP-D824EV](https://connixtech.co.nz/product/avtron-240w-8-zone-voice-alarm-controller-ap-d824ev/): The AP-D824EV is the eight zone version of AVTRON's 240W voice alarm controller, for buildings whose evacuation strategy needs more zones than a six zone unit provides — typically multi-storey premises where each floor is its own zone. All eight zones carry A and B speaker lines with low impedance monitoring, so speaker circuit faults surface through supervision rather than during an incident. Storage holds up to 255 MP3 or WMA messages on SD card. Eight programmable control inputs and eight programmable outputs, plus fault, EVAC and reset contacts, connect the controller to fire detection and building systems. The log retains 1000 records over ten years. Inputs include balanced mic/line, RCA and a fireman's microphone; speaker output is 100V across A/B eight zone lines at 80Hz-20kHz. Power is 200-260V AC with 24V DC backup at 300W. - [AVTRON EVAC Battery Charger and 24V Power Supply - AP-D6BPS](https://connixtech.co.nz/product/avtron-evac-battery-charger-and-24v-power-supply-ap-d6bps/): The AP-D6BPS is the power backbone of an EVAC voice alarm system. It supplies 24V DC to the system and keeps the standby batteries charged, switching automatically from AC to battery when mains fails — the transition that decides whether a voice alarm system works during the event it exists for. Dual outputs deliver 10A each, with charging current adjustable up to 10A in automatic or manual mode and a battery capacity selector for matching the installed battery set. Detection covers battery failure, over voltage, overheating and charging state, so a degraded battery is identified during routine monitoring rather than at the moment of a mains failure. A temperature-controlled high speed fan with over-heat protection manages thermal load. RS485 and CAN connections report status to the system. Power input is 200-260V AC with 24V DC and fuse protection at 300W. The 1U full-metal chassis measures 44 x 483 x 455mm at under 5kg. - [AVTRON 8 Channel Speaker Line Supervision and Amplifier Changeover - AP-D68LSC](https://connixtech.co.nz/product/avtron-8-channel-speaker-line-supervision-and-amplifier-changeover-ap-d68lsc/): The AP-D68LSC does the two jobs a certified voice alarm system cannot go without: proving the speaker lines are intact, and keeping audio running when an amplifier fails. Eight speaker lines are supervised for open circuit, short circuit and impedance deviation of ±10%, with faults reported by indicator, buzzer and contact output. Detection takes under two seconds per zone, with amplifier failure detected in under one second and changeover completed in under one second. One backup amplifier covers all eight main amplifiers, which is far more economical than duplicating every amplifier while still guaranteeing that no zone goes silent. Supervision uses a 20kHz pilot tone above the audible range on 50V, 70V or 100V speaker lines, so monitoring runs continuously without anyone hearing it. Zone capacity is 500W per 100V line with 8A loading capacity, expandable to 192 zones by DIP switch ID, with RS485 and a contact output. Power is 24V DC. - [AVTRON 6 Zone 500W EVAC Extension Router - AP-D650ERT](https://connixtech.co.nz/product/avtron-6-zone-500w-evac-extension-router-ap-d650rt/): The AP-D650RT adds six zones of 500W amplification to an EVAC voice alarm system, for extensions where the additional zones carry substantial speaker loads. Routers cascade to a maximum system capacity of 120 zones, so a site can grow building by building on the same architecture rather than replacing the head end. Each zone runs A and B speaker lines with low impedance monitoring, maintaining the continuous supervision a voice alarm system depends on, and up to 32 remote paging microphones are supported across the system. Matching the AP-D650EV controller in output and behaviour keeps commissioning, spares and operator familiarity consistent across the whole installation. - [AVTRON 500W 6 Zone Voice Alarm Controller - AP-D650EV](https://connixtech.co.nz/product/avtron-500w-6-zone-voice-alarm-controller-ap-d650ev/): The AP-D650EV is the higher-powered six zone EVAC controller, delivering 500W for buildings whose speaker load exceeds what a 240W unit can drive. Six zones run A and B speaker lines with low impedance monitoring, continuously supervising circuit integrity so faults are reported as they occur rather than found during an emergency. Up to 255 MP3 or WMA messages are stored on SD card, allowing evacuation, alert and zone-specific announcements to be held ready. Eight programmable control inputs and outputs plus fault, EVAC and reset contacts tie the system to fire detection and building management. The event log retains up to 1000 records over ten years. Inputs cover balanced mic/line, RCA and a fireman's microphone; output is 100V across A/B zone lines at 80Hz-20kHz with signal-to-noise better than 70dB. Power is 200-260V AC with 24V DC backup at 550W. - [AVTRON EVAC Touch Screen Remote Paging Station - AP-D632TS](https://connixtech.co.nz/product/avtron-evac-touch-screen-remote-paging-station-ap-d632ts/): The AP-D632TS is the touch screen paging position for an EVAC voice alarm system, and its advantage is scale: a single station addresses all 120 zones, where a keypad station is limited by the number of physical keys. Up to 32 remote microphones connect in a loop, so a cable break does not isolate the stations beyond it — the redundancy a life safety system requires. A line input with adjustable volume allows recorded or external audio to be paged out alongside live announcements from the gooseneck microphone. Microphone input is 5mV at 600 ohms with line input at 350mV/10k ohms, covering 80Hz-16kHz with signal-to-noise of 70dB or better and distortion under 1% at 1kHz. The full-metal black desktop unit measures 150 x 260 x 55mm at under 1.5kg on 24V DC, drawing under 5W, rated -20°C to 70°C. - [AVTRON 6 Zone 240W EVAC Extension Router - AP-D624RT](https://connixtech.co.nz/product/avtron-6-zone-240w-evac-extension-router-ap-d624rt/): The AP-D624RT extends an EVAC system beyond the zones its controller provides. Each router adds six supervised zones with its own 240W Class D amplifier, and routers cascade to a total system capacity of 120 zones. Message storage holds up to 255 MP3 or WMA recordings on SD card or via the player, so a large site can hold zone-specific and staged evacuation messages rather than one generic announcement. Eight programmable control inputs and eight programmable control outputs, plus dedicated fault, EVAC and reset contacts, integrate the router with fire panels and building systems. A log records the last ten years up to 1000 events, which is what an audit or incident review actually needs. Speaker output is 100V across A/B six zone lines, with balanced mic/line inputs, RCA inputs and a fireman's microphone input. Response is 80Hz-20kHz with signal-to-noise better than 70dB. Power is 200-260V AC with 24V DC backup, drawing 300W. - [AVTRON 12 Zone EVAC Keypad Paging Station - AP-D612PS](https://connixtech.co.nz/product/avtron-12-zone-evac-keypad-paging-station-ap-d612ps/): The AP-D612PS is the day-to-day paging station on an EVAC voice alarm system — the one reception or security uses for ordinary announcements on equipment that is also part of the life safety chain. Twelve zones are addressed directly, expanding to 120 zones with up to 32 remote microphones in a loop connection, so the same station design serves a single building or a campus. Six inputs with microphone and line selection allow recorded material or an external source to be paged out as readily as a live voice, with three-level zone selection indication. The gooseneck microphone covers 80Hz-16kHz with signal-to-noise of 70dB or better and distortion under 1% at 1kHz. The full-metal black desktop unit measures 150 x 260 x 55mm at under 1.5kg on 24V DC, drawing under 5W, rated -20°C to 70°C. - [AVTRON 16 Channel Power Sequencer - AP-D417](https://connixtech.co.nz/product/avtron-16-channel-power-sequencer-ap-d417/): The AP-D417 turns a rack on in the right order. Powering up amplifiers, processors and sources simultaneously produces both an inrush current spike and an audible thump through the speakers; sequencing them 0.4 to 0.5 seconds apart avoids both. Up to 16 components are switched in a defined order, with sources and processors brought up before amplifiers so the system never amplifies a settling signal. Each channel supplies 280W with a total capacity of 2kW from a 220V AC 20A input. Indicators cover power, each of CH1-CH16, and the timer, so the sequence can be watched as it runs. The 3U full-metal chassis measures 133 x 483 x 390mm at under 10kg, drawing under 30W, running from 200-240V AC with fuse protection and 24V DC. - [AVTRON 4 Channel Loudspeaker Line Lightning Arrestor - AP-D415](https://connixtech.co.nz/product/avtron-4-channel-loudspeaker-line-lightning-arrestor-ap-d415/): The AP-D415 protects a PA system from what comes back down the speaker cable. Outdoor loudspeaker runs act as aerials in a thunderstorm, and a single strike on a car park or sports field line can destroy the amplifier it terminates at. Four independent channels each handle a 70V or 100V loudspeaker line at up to 20A, with a rated discharge current of 30kA and overload protection across a 165-300V peak range. Because each channel is independent, a surge on one line does not take out the protection for the others — the system loses at most one zone rather than the whole rack. An alarm active output (0V signal) reports a protection event so the fault is known rather than discovered later. Leakage protection is 10mA and lightning protection meets IEC529/EN60 to IP20. The 2U full-metal chassis is 89 x 483 x 390mm at under 10kg, on 200-240V AC with 24V DC. - [AVTRON 5 Channel Main/Backup Amplifier Switch - AP-D414](https://connixtech.co.nz/product/avtron-5-channel-main-backup-amplifier-switch-ap-d414/): The AP-D414 is the answer to a failed amplifier in a system that cannot go quiet. It monitors five main amplifier channels and switches the affected zone to a backup amplifier automatically when a failure is detected — before anyone notices the zone has gone silent. Detection works by checking both input and output (50mV over 20ms in, 100mV over 20ms out), so it identifies a genuine amplifier fault rather than a period of no programme material. Manual operation lets a technician transfer a zone deliberately for amplifier maintenance or an upgrade, keeping the zone live while work proceeds. Inputs cover six audio source channels and five main amplifier channels, with five speaker channel outputs switching up to 150V/20A. Indicators show normal, fault and switch status per channel. The 2U full-metal chassis is 89 x 483 x 390mm at under 10kg, on 200-240V AC and 24V DC. - [AVTRON 16 Channel 24V DC Override Supply - AP-D413](https://connixtech.co.nz/product/avtron-16-channel-24v-dc-override-supply-ap-d413/): The AP-D413 is what makes volume-control override actually work across a building. Each of its 16 channels supplies 24V DC at 1A to the override relays in AVTRON volume controllers, forcing those zones back to full level when a priority broadcast goes out. Channels are activated by 16 corresponding alarm inputs, so a fire panel or paging controller can lift override zone by zone rather than all at once — important when only part of a building needs to be addressed. Front panel indicators cover power and each of CH1-CH16, with address dip settings for systems using multiple units. Trigger output is a low level (0V) or short circuit signal. The 3U full-metal chassis measures 133 x 483 x 390mm at under 10kg, running from 200-240V AC with fuse protection and 24V DC backup, drawing under 15W. - [AVTRON 32 Channel Digital Alarm Matrix - AP-D412](https://connixtech.co.nz/product/avtron-32-channel-digital-alarm-matrix-ap-d412/): The AP-D412 links a fire alarm system to a public address system and handles the part that catches most installations out: people in the rooms next door. When a zone goes into alarm, the matrix forces adjacent zones into alarm as well, with the spread selectable at 0, ±1, ±2, ±3 or ±4 zones. That lets a designer match the evacuation strategy to the building rather than accepting a fixed rule. Thirty-two 0V alarm inputs feed 32 outputs arranged in two groups of 16, with front panel indicators showing the alarm state of every channel and a zone selector and address DIP switch for configuration. Alarm active output is a 0V short circuit signal. The 2U full-metal chassis measures 89 x 483 x 390mm at under 7kg, running from 200-240V AC with fuse protection and 24V DC, drawing under 15W. - [AVTRON 16 Zone Digital Remote Paging Station - AP-D408](https://connixtech.co.nz/product/avtron-16-zone-digital-remote-paging-station-ap-d408/): The AP-D408 is the microphone end of an AP-D407 paging system. Sixteen zone keys sit under the operator's hand, and with the address selector the station reaches up to 128 loudspeaker lines across eight cascaded AP-D407 selectors. Communication distance runs to 600 metres, which puts the station wherever the people are — a gatehouse, a warehouse office, a remote reception — rather than tethering it to the rack room. A built-in chime tone precedes announcements, and indicators cover all 16 zones, the eight speaker selectors and microphone on/off state, so the operator can see exactly where a page is going before speaking. Microphone input is 600 ohm 5mV unbalanced with a 10k ohm 10V balanced line output. Response is 60Hz-16kHz ±3dB with signal-to-noise better than 70dB and distortion under 0.1% at 1kHz. The full-metal unit measures 70 x 238 x 170mm at under 3.5kg on 24V DC at under 8W. - [AVTRON 16 Zone Digital Paging Selector - AP-D407](https://connixtech.co.nz/product/avtron-16-zone-digital-paging-selector-ap-d407/): The AP-D407 routes paging to the right part of a building. Sixteen zones are selectable at the unit, and up to eight units cascade for sites that outgrow a single selector. Four priority levels decide what happens when several sources want the system at once — an emergency trigger, a management page and background music cannot all win, and the priority structure settles it without an operator. A built-in IC recorder stores two messages up to 180 seconds total, played on a 0V short signal, so routine or emergency announcements can be triggered without anyone at a microphone. Microphone input is 600 ohm 5mV unbalanced with a 10k ohm 330mV line input. Siren and recorded message output runs 100Hz-3.4kHz ±3dB while microphone and audio inputs cover 60Hz-16kHz. Signal-to-noise is better than 70dB, distortion under 0.1% at 1kHz. The 2U full-metal chassis runs on 200-240V AC and 24V DC at under 15W. - [AVTRON Digital Emergency Announcement Panel - AP-D406](https://connixtech.co.nz/product/avtron-digital-emergency-announcement-panel-ap-d406/): The AP-D406 is the emergency voice source in an analogue PA rack. A 0V short signal from a fire panel or a press of the front panel button starts the alarm immediately — either a generated siren tone or a stored voice message. Two messages can be recorded into the built-in IC memory, up to 180 seconds total, so a site can hold both an evacuation and an all-clear or shelter-in-place announcement without external playback hardware. Recording is done at the panel using the play/record controls, record level and volume, with a microphone input (600 ohm, 5mV) and a line input (10k ohm, 330mV). The siren and message path runs 100Hz-3.4kHz ±3dB, tuned for cut-through, while the microphone and audio inputs cover 60Hz-16kHz. Distortion is under 0.1% at 1kHz with signal-to-noise better than 70dB. The 2U full-metal chassis runs from 200-240V AC with 24V DC and fuse protection at under 15W. - [AVTRON Telephone Paging Interface - AP-D405](https://connixtech.co.nz/product/avtron-telephone-paging-interface-ap-d405/): The AP-D405 turns any telephone into a paging microphone. An incoming call on the RJ-11 line is answered automatically after a set number of rings, and the caller's voice is broadcast over the public address system. Zone targeting means the call can go to the whole site or to a single area, so a manager off site can address one loading dock without disturbing the rest of the building. A built-in stereo full-range monitor speaker (over 100mW) lets rack-side staff hear what is being broadcast. Ring times are configurable from two to five before answer, which prevents wrong numbers being put over the speakers. Inputs are one RJ-11 and one microphone (400-775mV); outputs cover audio at 10mV-330V and an active 0V short circuit signal. The 2U full-metal chassis is 89 x 483 x 350mm at under 6kg, on 220-240V AC with 24V DC and fuse protection, drawing under 15W. - [AVTRON 16 Channel Digital Monitor Panel - AP-D404](https://connixtech.co.nz/product/avtron-16-channel-digital-monitor-panel-ap-d404/): The AP-D404 lets an operator hear and see what is actually going out on 16 speaker lines. A built-in full-range 500mW monitor speaker reproduces the selected channel, and graphic LCD meters show level across five steps so a dead or distorted line is spotted before anyone complains about it. Monitoring takes 100V or 70V audio directly from the speaker lines, meaning the panel reports what the speakers receive rather than what the source sent — the distinction that matters when a fault lies downstream of the amplifier. Monitor volume is set across seven levels controlled from the AP-D400 master unit, with a local power switch and volume controls on the panel. Signal-to-noise is 80dB. The 2U full-metal chassis measures 89 x 483 x 366mm at under 8kg, rack or table mounted, on a 200-240V AC supply with fuse protection. A 0V trigger output is provided for power activation of connected equipment. - [AVTRON 12 Zone EVAC Expansion Station - AP-D12ZS](https://connixtech.co.nz/product/avtron-12-zone-evac-expansion-station-ap-d12zs/): The AP-D12ZS extends the reach of an EVAC voice alarm system. Each station adds 12 zones of remote paging, and up to 32 remote microphones can be connected in a loop, taking total capacity to 120 zones. A loop connection rather than a spur is significant for life safety: a single cable break does not isolate the stations beyond it, because the signal reaches them from the other direction. LED indicators show which zone is active, so the operator has direct confirmation of where an announcement is going — not a detail to leave to memory during an incident. The gooseneck microphone covers 80Hz-16kHz with signal-to-noise of 70dB or better and distortion under 1% at 1kHz. The full-metal black desktop unit measures 150 x 260 x 55mm at under 1.5kg on 5V DC, drawing under 3W, rated -20°C to 70°C. - [AVTRON Wired Conference Chairman Unit - AP-CU32](https://connixtech.co.nz/product/avtron-wired-conference-chairman-unit-ap-cu32/): The AP-CU32 is the chairman position in an AVTRON wired conference system. Priority control lets the chair mute active delegate microphones and take the floor immediately, which keeps large meetings moving without a technician intervening. A 1W monitor speaker with local volume control sits in the housing, and earphone and lapel connections are provided for delegates who need private audio. The gooseneck microphone picks up speech cleanly from 20cm to 120cm across a 40Hz-16kHz response, so the chair can sit back from the unit without dropping level. The tabletop housing measures 60 x 130 x 155mm and connects to the AP-CS31 main controller over the system's daisy-chained cabling. - [AVTRON Wired Conference System Main Controller - AP-CS31](https://connixtech.co.nz/product/avtron-wired-conference-system-main-controller-ap-cs31/): The AP-CS31 is the head end of an AVTRON wired conference system. It addresses up to 250 units in total and supplies power to 50 of them straight from the chassis, which covers boardrooms, council chambers and training rooms without additional power distribution. Because a 100W RMS amplifier is built in, most rooms need no separate power amplifier — four output groups feed zoned speakers or an overflow room. Audio is held to better than 70dB signal-to-noise with distortion under 0.005%, so speech stays clean at the far end of a long table. The unit runs from 220-240V AC with 24V DC support and fuse protection, drawing under 120W. The full-metal 3U enclosure fits a 19-inch rack or sits on a table where no rack is available. - [AVTRON 8 Inch EN54-24 Fire Resistant Ceiling Speaker - AP-C86FS](https://connixtech.co.nz/product/avtron-8-inch-en54-24-fire-resistant-ceiling-speaker-ap-c86fs/): The AP-C86FS is the largest fire resistant ceiling speaker in AVTRON's EN54 range, using an 8-inch paper woofer certified to EN54-24 and BS5839 for voice evacuation. Its 110Hz-18kHz response reaches lower than the smaller models, which helps intelligibility in large volumes — atriums, warehouses, sports halls — where the low mid-range carries the weight of a spoken message. Sensitivity is 92dB at 1W/1M with maximum output to 102dB. The full metal enclosure and metal fire dome maintain ceiling fire integrity and keep the speaker operating for the certified duration. Taps are 6W, 3W and 1.5W on 70V or 100V line, with spring clip mounting into the ceiling. The 270mm diameter x 133mm unit weighs under 2.5kg, available in red or white RAL 9016. - [AVTRON 6 Inch EN54-24 Fire Resistant Ceiling Speaker - AP-C66FS](https://connixtech.co.nz/product/avtron-6-inch-en54-24-fire-resistant-ceiling-speaker-ap-c66fs/): The AP-C66FS is the 6-inch fire resistant ceiling speaker in AVTRON's EN54 range, certified to EN54-24 and BS5839 for voice evacuation systems. The larger driver gives it 92dB sensitivity with maximum output to 102dB and a wider 120Hz-18kHz response than the 5-inch model, meaning fewer speakers are needed to cover the same area to the intelligibility level a voice evacuation design demands. A full metal enclosure with metal fire dome back cover preserves ceiling fire integrity and keeps the speaker functioning through the certified period. Taps are 6W, 3W and 1.5W on 70V or 100V line, with spring clip mounting. The 230mm diameter x 135mm unit weighs under 2kg, available in red or white RAL 9016, with a paper cup dust cover. - [AVTRON 5 Inch EN54-24 Fire Resistant Ceiling Speaker - AP-C56FS](https://connixtech.co.nz/product/avtron-5-inch-en54-24-fire-resistant-ceiling-speaker-ap-c56fs/): The AP-C56FS is a certified voice evacuation speaker, compliant with EN54-24 and BS5839 — the standards a life safety system has to meet, and the reason a general purpose ceiling speaker cannot be substituted in an evacuation circuit. A full metal enclosure with metal fire dome back cover maintains the ceiling's fire integrity and keeps the speaker working for the period the standard requires, while also improving music reproduction as a side benefit. The 5-inch full-range driver covers 130Hz-15kHz at 90dB sensitivity with maximum output to 98dB, so the same speaker handles background music and announcements between emergencies. Taps are 6W, 3W and 1.5W on 70V or 100V line, with spring clip mounting into the ceiling. The 180mm diameter x 135mm unit weighs under 1.5kg and is available in red or white RAL 9016. - [AVTRON Square Ceiling Mount Coaxial Speaker - AP-C19](https://connixtech.co.nz/product/avtron-square-ceiling-mount-coaxial-speaker-ap-c19/): The AP-C19 is the square option in AVTRON's ceiling speaker range, and the choice is architectural rather than acoustic: in ceilings laid out on a square grid of tiles, downlights and diffusers, a round speaker is the element that looks wrong. The coaxial driver gives the same sound quality benefits as the round models, with the line matching transformer maintaining low frequency response while supporting higher SPL demands. Taps at 6W and 3W on a 100V or 70V line allow level trimming per room, covering 100Hz-16kHz with 91dB sensitivity and maximum output to 102dB. The ABS enclosure with metal grille measures 215 x 215 x 178mm, fitting a 170 x 170mm cutout, at under 1.3kg in white RAL 9016. - [AVTRON 8 Inch 40W Two-Way High Power Ceiling Speaker - AP-C18](https://connixtech.co.nz/product/avtron-8-inch-40w-two-way-high-power-ceiling-speaker-ap-c18/): The AP-C18 is the largest ceiling speaker in AVTRON's hi-fi range, using an 8-inch format for the extra low frequency extension that big rooms and high ceilings need. Rated to 40W with maximum output of 104dB, it covers atriums, gymnasiums, large retail floors and function spaces where smaller ceiling speakers have to be installed in far greater numbers to reach the same level. Four taps at 40W, 20W, 10W and 5W give unusually fine control over level per position, and 8 ohm operation is supported alongside 100V and 70V line for low-impedance installations. Response runs 90Hz-20kHz through a coaxial woofer and 1-inch treble driver. The ABS enclosure with metal back cover and grille is 230mm diameter x 170mm on a 200mm cutout, under 3.2kg in white. - [AVTRON 6 Inch 30W Two-Way High Power Ceiling Speaker - AP-C17](https://connixtech.co.nz/product/avtron-6-inch-30w-two-way-high-power-ceiling-speaker-ap-c17/): The AP-C17 is the high-power 6-inch ceiling speaker in AVTRON's range, rated to 30W for spaces with high ceilings or high ambient noise where a 10W unit cannot deliver enough level at the listener. A polypropylene woofer handles the extra power without the cone breakup a paper driver shows when pushed, paired with a 1-inch treble driver in a coaxial arrangement. The line matching transformer maintains low frequency response while increasing output for higher SPL applications, covering 90Hz-20kHz — a wider range than most ceiling speakers in commercial use. Taps at 30W, 15W and 10W on 100V or 70V line allow level setting per position, with maximum output to 102dB. The metal enclosure with ABS back and metal grille is 230mm diameter x 150mm on a 200mm cutout, under 2.8kg in white. - [AVTRON 6 Inch 10W Ceiling Speaker - AP-C161](https://connixtech.co.nz/product/avtron-6-inch-10w-ceiling-speaker-ap-c161/): The AP-C161 adds a dedicated 6-inch woofer ceiling speaker. Extended low frequency response and a 100Hz-16kHz range make it suitable for spaces where background music is a feature rather than an afterthought — hospitality, retail, reception areas. Taps at 10W and 5W on a 100V or 70V line allow level balancing. The ABS enclosure with metal grille is 188mm diameter x 85mm on a 165mm cutout, under 1kg in white. - [AVTRON 6 Inch 10W Coaxial Ceiling Speaker - AP-C15](https://connixtech.co.nz/product/avtron-6-inch-10w-coaxial-ceiling-speaker-ap-c15/): The AP-C15 is a 6-inch coaxial ceiling speaker for larger rooms carrying both background music and announcements. The dual cone coaxial arrangement extends the top end beyond what a plain full-range paper cone manages, which is the difference between music that sounds present and music that sounds muffled through a ceiling. Line matching transformer taps at 10W, 5W and 2.5W on a constant 100V or 70V line allow level to be trimmed per position, so a large open area and a quieter adjoining space can share a zone. Sensitivity is 92dB at 1W/1M with maximum output to 103dB, covering 110Hz-13kHz with distortion under 3%. The metal enclosure with ABS back and metal grille is 230mm diameter x 85mm needing a 195mm cutout, weighing under 1.4kg in light white. - [AVTRON 3" 6W Ceiling Speaker - AP-C13](https://connixtech.co.nz/product/avtron-3-inch-6w-waterproof-ceiling-speaker-ap-c13/): The AP-C13 is built for ceilings where the audio is not supposed to announce itself. Its mini-size format matches the diameter of typical spot lighting, so a run of speakers reads as part of the lighting layout rather than as separate hardware. A 4-inch full-range driver handles background music and paging with balanced output, tapped at 6W or 3W on a 100V line so levels can be set per room. Stainless painted steel enclosure and steel grille give it corrosion resistance for moisture-prone areas — covered walkways, bathrooms, poolside ceilings, commercial kitchens — where a standard ceiling speaker would eventually fail. Spring clip mounting fixes it into the ceiling cutout quickly, and the white finish suits contemporary commercial interiors. - [AVTRON 10 Inch 240W Ceiling Subwoofer - AP-C102Z](https://connixtech.co.nz/product/avtron-10-inch-240w-ceiling-subwoofer-ap-c102z/): The AP-C102Z is a ceiling subwoofer, designed to sit alongside standard ceiling speakers and supply the low end they physically cannot produce. Adding one to an existing installation transforms background music in hospitality and retail spaces without replacing the speaker layout — the small ceiling speakers keep handling speech and mid-range, and the subwoofer fills in below them. Response reaches down to 35Hz, roughly two octaves below what a 6-inch ceiling speaker manages, with maximum output to 112dB. Overload protection guards the driver where users push a system beyond its limits. Multi-tapping covers 240W, 120W and 60W, or 240W at 4 ohms, taking 70V/100V line or 8 ohm input. The metal dome with ABS grille measures 360mm diameter x 330mm on a 330mm cutout, under 9.5kg, in white with black dome. - [AVTRON 16-Bay Wireless Microphone Battery Charger - AP-BC259](https://connixtech.co.nz/product/avtron-16-bay-wireless-microphone-battery-charger-ap-bc259/): The AP-BC259 turns over an entire wireless conference room in one cycle. Sixteen batteries charge simultaneously at 700mA, reaching full in eight to ten hours, so a system used during the day is ready for the next morning without staff rotating cells by hand. Per-bay indicators flash red while charging and turn green at full, giving an at-a-glance read on which units are ready to deploy. The unit draws under 210W from a 220-240V supply with fuse protection. The full-metal black enclosure is built as a protective flight case at 178 x 625 x 375mm and under 9kg, which suits AV rental fleets and systems that move between venues. - [AVTRON Dual 30W Active Wall Mount Speaker Pair - AP-AW560](https://connixtech.co.nz/product/avtron-dual-30w-active-wall-mount-speaker-pair-ap-aw560/): The AP-AW560 is the larger active pair in AVTRON's range, stepping up to 6-inch drivers and 30W per channel for rooms where the 20W model runs out of level. Everything is still self-contained: the amplifier is in the speaker, so the room needs a power outlet and a source, not a rack. Inputs cover two RCA, stereo 3.5mm, microphone and line. Circuit protection covers high temperature, short circuit, overload and clip — worth having on an active speaker that will be driven hard by users who cannot see a meter. Two-way drivers deliver 30W per channel at 8 ohms across 70Hz-20kHz ±0.5dB, with better than 95dB signal-to-noise, 0.05% distortion and ±10dB treble and bass adjustment. Black ABS enclosures with metal grilles measure 290 x 245 x 220mm with built-in wall brackets. - [AVTRON Dual 20W Active Wall Mount Speaker Pair - AP-AW540](https://connixtech.co.nz/product/avtron-dual-20w-active-wall-mount-speaker-pair-ap-aw540/): The AP-AW540 is a self-contained stereo pair — the amplifier is built into the speakers, so a room gets local music and paging without any rack equipment at all. That suits the meeting room, small gym, showroom or classroom that sits outside the main PA system, or a space added after the original installation where running speaker line back to a plant room is not worth the disruption. Inputs cover two RCA, a stereo 3.5mm jack, a microphone input and a line input, so a laptop, a phone and a microphone can all connect at once. Treble and bass are adjustable ±10dB at the speaker. Two-way 5-inch and 1.5-inch drivers deliver 20W per channel at 8 ohms across 20Hz-20kHz ±0.5dB, with signal-to-noise better than 95dB and 0.05% distortion. Black ABS enclosures with metal grilles measure 250 x 185 x 170mm with built-in wall brackets. - [HIKVISION BI-SPECTRUM HEATPRO BULLET - DS-2TD2628-7-QA](https://connixtech.co.nz/product/hikvision-bi-spectrum-heatpro-bullet-ds-2td2628-7-qa/): Hikvision HeatPro bi-spectrum bullet pairing a 256 x 192 thermal sensor with a 4MP optical camera, for fire prevention and perimeter detection. Temperature alarms from -20°C to 150°C, vehicle and human classification, and smoking detection. - [Hikvision 64CH DeepinMind Pro 8 HDD NVR - IDS-9664NXI-P8](https://connixtech.co.nz/product/hikvision-64ch-deepinmind-pro-8-hdd-nvr-ids-9664nxi-p8/): Hikvision iDS-9664NXI-P8 – DeepinMind Pro NVR 64-Channel AI Network Video Recorder with AcuSeek & Advanced AI Analytics The Hikvision iDS-9664NXI-P8 is a professional DeepinMind Pro NVR designed for advanced CCTV surveillance applications. It supports up to 64 IP cameras and combines AI-powered video analytics with high-performance video decoding and intelligent search capabilities. - [Hikvision 64 Channel 8 HDD NVR - DS-9664NI-M8](https://connixtech.co.nz/product/hikvision-64-channel-8-hdd-nvr-ds-9664ni-m8/): Hikvision 64-Channel Network Video Recorder with 4K Ultra HD Recording The DS-9664NI-M8 is a high-performance Hikvision Network Video Recorder designed for large-scale CCTV surveillance systems. It supports up to 64 IP cameras and provides high-resolution recording, advanced video management and multiple storage options - [DYNAMIX Cat6A White F/UTP Cable - C-C6AF-SLDWHITE](https://connixtech.co.nz/product/dynamix-cat6a-white-f-utp-cable-c-c6af-sldwhite/): DYNAMIX C-C6AF-SLDWHITE 305m Cat6A F/UTP network cable featuring 23AWG 4-pair construction, 500MHz bandwidth and a white PVC jacket. Supplied on a plastic reel box for easy handling and installation. - [HDMI 60 Meter Extender Metal - AV-HD1460ME](https://connixtech.co.nz/product/hdmi-60-meter-extender-metal-av-hd1460me/): AV-HD1460ME – 1080P 60M Cat6 HD Extender Extend HD video signals up to 60 metres using a single Cat6 cable — with no additional power required. The AV-HD1460ME 1080P Cat6 HD Extender is designed to overcome the distance limitations of standard HDMI/HD cables by transmitting high-definition video over a single Cat6 cable. It supports resolutions up to 1080P over distances of up to 60 metres, making it an ideal solution for CCTV, DVR, NVR and other HD video applications. - [HDMI 30Meter Extender Metal - AV-HD1430ME](https://connixtech.co.nz/product/hdmi-30meter-extender-metal-av-hd1430me/): AV-HD1430ME – 1080P 30M Cat6 HD Extender Extend HD video signals up to 30 metres using a single Cat6 cable — with no additional power required. The AV-HD1430ME 1080P Cat6 HD Extender is designed to overcome the distance limitations of standard HDMI/HD cables by transmitting high-definition video over a single Cat6 cable. It supports resolutions up to 1080P over distances of up to 30 metres, making it an ideal solution for CCTV, DVR, NVR and other HD video applications. - [HDMI 4K Switch 4 in 1 Out - AV-HS41S-M](https://connixtech.co.nz/product/hdmi-4k-switch-4-in-1-out-av-hs41s-m/): 4×1 HDMI Switcher with Audio Extraction – 4K @ 60Hz Switch between four HDMI sources and output to one HDMI display, with additional digital and analogue audio extraction. This 4×1 HDMI Switcher supports HDMI resolutions up to 4K @ 60Hz and provides audio extraction through both 3.5mm headphone and optical digital audio outputs. It supports 3D video, Deep Color and common LPCM, DTS and Dolby audio formats. - [HDMI 4K Switch 4 in 1 Out - AV-HS41A-M](https://connixtech.co.nz/product/hdmi-4k-switch-4-in-1-out-av-hs41a-m/): 4×1 HDMI Auto Switch – Seamless Switching Automatically switch between up to four HDMI input sources and connect them to a single HDMI display. This 4×1 HDMI Auto Switch supports seamless switching between multiple HDMI sources, with both automatic and manual switching modes. It supports resolutions up to 4K @ 30Hz and is suitable for CCTV displays, media players, gaming consoles, set-top boxes and other HDMI devices. - [HDMI 1 in 2 Out Splitter 4K/2K - AV-HD12-SP](https://connixtech.co.nz/product/hdmi-1-in-2-out-splitter-4k-2k-av-hd12-sp/): This 1×2 HDMI Splitter distributes a single HDMI input to up to four HDMI displays while maintaining high-quality digital video and audio. Supporting resolutions up to 4K/2K @ 30Hz, it is suitable for CCTV monitoring, commercial displays, meeting rooms, digital signage and home entertainment applications. - [HDMI 1 in 4 Out Splitter 4K/2K - AV-HD14-SP](https://connixtech.co.nz/product/hdmi-1-in-4-out-splitter-4k-2k-av-hd14-sp/): This 1×4 HDMI Splitter distributes a single HDMI input to up to four HDMI displays while maintaining high-quality digital video and audio. Supporting resolutions up to 4K/2K @ 30Hz, it is suitable for CCTV monitoring, commercial displays, meeting rooms, digital signage and home entertainment applications. - [4 Port Fast Ethernet Smart POE Switch - DS-3E1105P-EI-V2](https://connixtech.co.nz/product/4-port-fast-ethernet-smart-poe-switch-ds-3e1105p-ei-v2/): Hikvision 4-port 10/100 PoE switch with a 60W power budget and one RJ45 uplink, supporting 802.3af and 802.3at at up to 30W per port. PoE watchdog restarts unresponsive cameras, with 6kV surge protection and 300m long-range PoE. - [6-Zone EVAC Controller – 240W Class-D Amplifier - AP-D624EV](https://connixtech.co.nz/product/6-zone-evac-controller-240w-class-d-amplifier-ap-d624ev/): A powerful all-in-one 6-zone voice evacuation controller featuring a built-in 240W Class-D amplifier, emergency voice messaging and fireman microphone. Designed for commercial and public facilities requiring reliable voice evacuation, emergency announcements and zoned public address. - [Hikvision 4MP ANPR Vari-focal Bullet Camera - IDS-2CD7A46G0-P-IZHSY-2.8-12MM](https://connixtech.co.nz/product/hikvision-4mp-anpr-vari-focal-bullet-camera-ids-2cd7a46g0-p-izhsy-2-8-12mm/): The Hikvision IDS-2CD7A46G0-P-IZHSY is a 4MP ANPR (licence-plate recognition) bullet camera engineered for entrances, car parks and access points. A 1/1.8″ sensor with DarkFighter low-light technology and a 2.8–12mm motorised varifocal lens captures clear plates day or night, with 50m Smart IR and 120dB WDR for tough lighting. Deep-learning ANPR reads and logs number plates, H.265+ keeps storage efficient, and the IP67/IK10 housing withstands weather and tampering. - [TandemVu 4MP+4MP 4X POE PTZ Network Camera - PTZ-ND4404/SL](https://connixtech.co.nz/product/tandemvu-4mp4mp-4x-poe-ptz-network-camera-ptz-nd4404-sl/): The HiLook PTZ-ND4404/SL TandemVu is a dual-sensor PTZ camera that captures the wider scene and zoomed-in detail at the same time — a fixed 4MP overview channel paired with a 4MP PTZ channel offering 4× optical and 16× digital zoom. DarkFighter technology delivers strong low-light colour, active red-and-blue lights plus audio provide visible deterrence, and human/vehicle detection focuses alerts. Supports WDR, HLC, BLC, 3D DNR and defog, powered by 12V DC or PoE+. - [Hikvision Pro 5MP Fixed 360 Degree Fisheye Network Camera - DS-2CD2955G0-ISU](https://connixtech.co.nz/product/hikvision-pro-5mp-fixed-360-degree-fisheye-network-camera-ds-2cd2955g0-isu/): The Hikvision DS-2CD2955G0-ISU is a 5MP 360°/180° fisheye network camera that covers an entire room or forecourt from a single unit, eliminating blind spots. A 1/2.7″ sensor and 1.05mm panoramic lens deliver 2560×1920 detail, with 120dB True WDR for strong backlight and 8m IR for low light. AI line-crossing and intrusion detection add smart alerts, and audio and alarm interfaces plus an IP67/IK10 build make it a versatile wide-area camera. - [HIKVISION G2 Android Intercom Indoor Station - KH9570-WTE1/S](https://connixtech.co.nz/product/hikvision-g2-android-intercom-indoor-station-kh9570-wte1-s/): HIKVISION KH9570-WTE1 G2 ANDROID Intercom Indoor Station with Alarm In/Out, White Color, 10" Touch screen, Micro SD, Wi-Fi6, PoE or 12V DC Power. - [DYNAMIX 6RU Universal Swing Wall Mount Cabinet Removable Back mount - RSFDS6-450](https://connixtech.co.nz/product/dynamix-6ru-universal-swing-wall-mount-cabinet-removable-back-mount-rsfds6-450/): The DYNAMIX RSFDS6-450 is a 6RU universal swing wall-mount cabinet supplied fully assembled and ready to use. Its removable back-mount plate and reversible left/right hinges make installation and servicing easy, even in tight spaces, with cable entry at the rear, top and bottom. Includes a fixed shelf, cage nuts, a drop-in dual-fan kit, removable lockable side panels and a lockable safety-glass front door. Measures 600(W) × 450(D) × 368mm(H) with a 60kg load rating; gloss-black finish. - [DYNAMIX Cat6 UTP Keystone RJ45 Slimline Jack - FP-C6-008V2](https://connixtech.co.nz/product/dynamix-cat6-utp-keystone-rj45-slimline-jack-fp-c6-008v2/): The DYNAMIX FP-C6-008V2 is a slimline Cat6 UTP RJ45 keystone jack designed for high-density installations. Its compact 180-degree profile fits side-by-side in 24- and 48-port patch panels and multi-gang faceplates without crowding. 50-micron gold plating over nickel ensures corrosion resistance and stable Gigabit/10GbE performance, while clearly labelled dual T568A/T568B IDC blocks reduce termination errors. Accepts 23–24 AWG cable; for rapid termination use the DYNAMIX CT-RAPV2 tool. Supplied in black. - [DYNAMIX Horizontal 19' 1RU Unloaded 24 Port UTP Patch Panel - PP-UK-24](https://connixtech.co.nz/product/dynamix-horizontal-19-1ru-unloaded-24-port-utp-patch-panel-pp-uk-24/): The DYNAMIX PP-UK-24 is a 1U 19″ rack-mount unloaded patch panel with capacity for 24 slimline keystone jacks. Its 'pay-as-you-grow' design lets you populate only the ports you need today and add jacks later as demand grows, while individual keystones make termination and maintenance easy — a single faulty port can be swapped without disturbing the rest. Powder-coated steel construction, black finish, RoHS compliant. (Requires DYNAMIX slimline keystone jacks.) - [AVTRON CAT6 UTP Solid BC Outdoor PE UV Resistant Cable 250M - AV-C6UBC250BK](https://connixtech.co.nz/product/avtron-cat6-utp-solid-bare-copper-outdoor-pe-uv-resistant-cable-250m-av-c6ubc250bk/): AVTRON CAT6 UTP 24AWG Solid Core Bare Copper Outdoor PE UV Resistant ANSI/TIA-568.2-D Network Cable. - [Avtron CAT6 UTP High Copper Solid LAN Cable 305M - AV-C6UHC305BL](https://connixtech.co.nz/product/avtron-cat6-u-utp-high-copper-solid-lan-cable-305m-av-c6uhc305bl/): AVTRON CAT6 U/UTP solid core high copper 0.5mm network cable, 305-meter box in blue, suitable for CCTV and network installations. - [UNV 6MP Smart Dual Light Fixed Turret IPC - IPC3616LE-ADF28KM-DL](https://connixtech.co.nz/product/unv-6mp-smart-dual-light-fixed-turret-ipc-ipc3616le-adf28km-dl/): The Uniview IPC3616LE-ADF28KM-DL is a 6MP fixed-turret IP camera built for reliable 24/7 outdoor surveillance. Its 1/2.4″ sensor and 2.8mm lens deliver sharp 3200×1800 images, while Smart Dual-Light illumination — IR and warm light to 30m — captures clear footage day or night. 120dB WDR handles harsh backlighting, and Ultra Motion Detection with human and vehicle classification cuts false alerts. A built-in mic, microSD support up to 512GB, IP67 weatherproofing and PoE power make it a fast, low-maintenance choice for residential and commercial installs. - [TVT 4 Channel PoE NVR - TD-3104H1-4P-B2-B](https://connixtech.co.nz/product/tvt-4-channel-poe-nvr-td-3104h1-4p-b2-b/): The TVT TD-3104H1-4P-B2-B is a compact 4-channel plug-and-play PoE NVR with a built-in 4-port PoE switch — connect and power four IP cameras (up to 8MP) over a single cable each. H.265+ compression maximises storage on the single-HDD bay, while 4K HDMI output delivers crisp live view and playback. Built-in analytics including face recognition and smart motion detection help surface the events that matter. A neat, cost-effective recorder for small residential and commercial sites. - [Hikvision 8MP AcuSense Motorised Varifocal Dome Network Camera - DS-2CD3786G2HT-LIZSUY](https://connixtech.co.nz/product/hikvision-8mp-acusense-motorised-varifocal-dome-network-camera-ds-2cd3786g2ht-lizsuy/): The Hikvision DS-2CD3786G2HT-LIZSUY is an 8MP AcuSense motorised varifocal dome with a 2.7–13.5mm remote zoom and focus, letting you set the exact field of view from software. AcuSense AI targets people and vehicles to reduce false alerts, with 40m Smart IR night vision and 120dB WDR. Vandal-resistant to IK10 and weatherproof to IP67, it includes audio and alarm I/O and efficient H.265+ storage — a flexible choice for demanding installs. - [Hikvision Junction Box for Bullet Cameras - DS-1280ZJ-S](https://connixtech.co.nz/product/hikvision-junction-box-for-bullet-cameras-ds-1280zj-s/): The Hikvision DS-1280ZJ-S is a weatherproof junction box for Hikvision bullet cameras, giving a neat, protected space for cabling and connectors at the camera. Its aluminium construction and white finish match the camera housing, with rear cable entry for a clean wall-mounted install. A practical accessory for tidy, professional outdoor CCTV installations. - [Hikvision Pendant mount for Cameras - DS-1271ZJ-140](https://connixtech.co.nz/product/hikvision-pendant-mount-for-cameras-ds-1271zj-140/): The Hikvision DS-1271ZJ-140 is a pendant (ceiling drop) mount for dome and turret cameras, ideal for suspending a camera from a high ceiling or soffit. Made from aluminium in a white finish to match the camera, it offers a clean cable pass-through and a stable, professional install. Dimensions Φ150 × 545mm. - [Hikvision Vertical pole mount for Cameras - DS-1275ZJ-SUS](https://connixtech.co.nz/product/hikvision-vertical-pole-mount-for-cameras-ds-1275zj-sus/): The Hikvision DS-1275ZJ-SUS is a vertical pole-mount bracket for mounting turret, dome and bullet cameras to poles and columns. Built from stainless steel in a white finish that matches Hikvision camera housings, it provides a stable platform with tidy cable pass-through. Measures 127 × 46 × 250mm — a durable, weather-ready mounting solution for outdoor installations. - [Hikvision Wall Mount Bracket for Dome Cameras - DS-1273ZJ-140B](https://connixtech.co.nz/product/hikvision-wall-mount-bracket-for-dome-cameras-ds-1273zj-140b/): Hikvision black colour wall mount bracket for turret and dome cameras, providing flexible positioning for corner and wall installations. - [Hikvision Corner Mount Bracket for Cameras - DS-1276ZJ-SUS](https://connixtech.co.nz/product/hikvision-corner-mount-bracket-for-cameras-ds-1276zj-sus/): Hikvision wall mount bracket for dome cameras, providing flexible positioning for corner and wall installations. - [Hikvision Wall Mount Bracket for Dome Cameras Black - DS-1273ZJ-130-TRL-BLK](https://connixtech.co.nz/product/hikvision-wall-mount-bracket-for-dome-cameras-black-ds-1273zj-130-trl-blk/): Hikvision black colour wall mount bracket for turret and dome cameras, providing flexible positioning for corner and wall installations. - [Hikvision Junction Box for Dome Cameras - DS-1280ZJ-DM21-BLK](https://connixtech.co.nz/product/hikvision-junction-box-for-dome-cameras-ds-1280zj-dm21-blk/): Hikvision Black colour junction box accessory for dome cameras, concealing cables and providing a clean installation finish. - [Hikvision Junction Box for Dome Cameras - DS-1280ZJ-DM8-BLK](https://connixtech.co.nz/product/hikvision-junction-box-for-dome-cameras-ds-1280zj-dm8-blk/): Hikvision Black colour junction box accessory for dome cameras, concealing cables and providing a clean installation finish. - [Hikvision Junction Box for Dome Cameras - DS-1280ZJ-DM21](https://connixtech.co.nz/product/hikvision-junction-box-for-dome-cameras-ds-1280zj-dm21/): Hikvision junction box accessory for dome cameras, concealing cables and providing a clean installation finish. - [Sliding Gate Track 20mm U Groove 6meters CX-UT6-20](https://connixtech.co.nz/product/sliding-gate-track-20mm-u-groove-6meters-cx-ut6-20/): Six metre sliding gate track with a 20mm U-groove in heavy-duty steel, pre-drilled for 6.4mm concrete anchors. The longer length halves the number of joins on a wide opening. Rounded edges reduce tyre damage. Anchors sold separately. - [Spike Single Top Swing Gate CX-STSWG21](https://connixtech.co.nz/product/spike-single-top-swing-gate-cx-stswg21/): The CX-STSWG21 is a double-leaf spike-top swing gate crafted from lightweight, rust-free aluminium with a hard-wearing black powder-coat finish. The standard 2 × 1.6m (W) × 1.7m (H) configuration features a round-bar design topped with decorative aluminium spikes for security and street appeal, built on a 50×50×3.0mm frame. Custom sizes and colours available to suit your opening. A solid choice for residential and commercial entrances. - [BFT Sliding Gate Operator DEIMOS ULTRA BT A600 V](https://connixtech.co.nz/product/bft-sliding-gate-operator-deimos-ultra-bt-a600-v/): The BFT DEIMOS ULTRA BT A600 V is a 24V electromechanical operator for residential and light-commercial sliding gates up to 360kg, rated for intensive use. Magnetic limit switches ensure precise, reliable positioning in any conditions, and controlled slowdown gives smooth stops at a 16m/min gate speed. The MERAK SL2 control unit features a programming display, front-access casing screws simplify install and maintenance in tight spaces, and a personalised release key allows safe manual operation. IP44-rated for outdoor use. - [HIKVISION 100 MBPS POE REPEATER SPLITTER DS-3E0103DP-E-R](https://connixtech.co.nz/product/hikvision-100-mbps-poe-repeater-splitter-ds-3e0103dp-e-r/): The Hikvision DS-3E0103DP-E/R is a plug-and-play PoE repeater/splitter with one 10/100 Mbps PoE input and two 10/100 Mbps PoE outputs, ideal for extending transmission distance and powering two devices from a single source. It intelligently identifies powered devices to IEEE 802.3af/at with up to 30W total output, requires no configuration, and suits cost-effective PoE networks in hotels, campuses and similar sites. - [Sliding Gate Wheel 58MM With Bracket CX-E1U60-D16](https://connixtech.co.nz/product/sliding-gate-wheel-58mm-with-bracket-cx-e1u60-d16/): Heavy-duty external sliding gate wheel with mounting bracket, featuring an 58mm steel wheel designed for 16mm gate tracks. Supports gates up to 250kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. - [Sliding Gate Wheel 78MM With Bracket CX-E1U80-D16](https://connixtech.co.nz/product/sliding-gate-wheel-78mm-with-bracket-cx-e1u80-d16/): Featuring an 78mm steel wheel designed for 16mm gate tracks. Supports gates up to 250kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. Heavy-duty external sliding gate wheel with mounting bracket. - [Sliding Gate Wheel 98MM With Bracket CX-E1U100-D16](https://connixtech.co.nz/product/sliding-gate-wheel-98mm-with-bracket-cx-e1u100-d16/): Heavy-duty external sliding gate wheel with mounting bracket, featuring an 98mm steel wheel designed for 16mm gate tracks. Supports gates up to 500kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. - [Sliding Gate Wheel 78MM Dia With Bracket CX-E1U80-D20](https://connixtech.co.nz/product/sliding-gate-wheel-78mm-dia-with-bracket-cx-e1u80-d20/): Featuring an 78mm steel wheel designed for 16mm gate tracks. Supports gates up to 250kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. Heavy-duty external sliding gate wheel with mounting bracket. - [88MM Sliding gate wheel CX-E1U90-D20](https://connixtech.co.nz/product/88mm-sliding-gate-wheel-cx-e1u90-d20/): Heavy-duty external sliding gate wheel with mounting bracket, featuring an 88mm steel wheel designed for 20mm gate tracks. Supports gates up to 250kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. - [Sliding Gate Wheel 98MM With Bracket CX-E1U100-D20](https://connixtech.co.nz/product/sliding-gate-wheel-98mm-with-bracket-cx-e1u100-d20/): Featuring an 98mm steel wheel designed for 20mm gate tracks. Supports gates up to 500kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. Heavy-duty external sliding gate wheel with mounting bracket. - [88MM Commercial Sliding Gate Wheel With Bracket CX-EX2U90-D20](https://connixtech.co.nz/product/88mm-commercial-sliding-gate-wheel-with-bracket-cx-ex2u90-d20/): Commercial grade external sliding gate wheel with mounting bracket, featuring an 88mm steel wheel designed for 20mm gate tracks. Supports gates up to 500kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. - [Sliding Gate Wheel 78MM With Bracket CX-I1U80-D16](https://connixtech.co.nz/product/sliding-gate-wheel-78mm-with-bracket-cx-i1u80-d16/): Featuring a recessed sliding gate roller wheel with an internal support bracket 78mm steel wheel designed for 16mm gate tracks. Supports gates up to 250kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. Heavy-duty internal sliding gate wheel with mounting bracket. - [Internal Sliding Gate Wheel 78MM With Bracket CX-I1U80-D20](https://connixtech.co.nz/product/internal-sliding-gate-wheel-78mm-with-bracket-cx-i1u80-d20/): Featuring a recessed sliding gate roller wheel with an internal support bracket 78mm steel wheel designed for 20mm gate tracks. Supports gates up to 250kg per wheel, providing smooth, reliable performance for residential and commercial sliding gate systems. Heavy-duty internal sliding gate wheel with mounting bracket. - [Sliding Gate Top Guide Roller 120mm Black CX-GR120B](https://connixtech.co.nz/product/sliding-gate-top-guide-roller-120mm-black-cx-gr120b/): 120mm sliding gate top guide roller assembly with 40mm black nylon rollers on a steel base-mount bracket — the low-profile option where the gate needs support close to the track. Quiet running and built for continuous outdoor duty. - [Sliding Gate Top Guide Roller 250mm Black CX-GR250B](https://connixtech.co.nz/product/sliding-gate-top-guide-roller-250mm-black-cx-gr250b/): 250mm sliding gate top guide roller assembly with 40mm black nylon rollers on a steel base-mount bracket. Adjustable for accurate alignment, weather resistant, and suited to both manual and automatic sliding gates. - [AVTRON 60W SIP Column Speaker - AP-SC60](https://connixtech.co.nz/product/avtron-60w-sip-column-speaker-ap-sc60/): The AP-SC60 sits between the 40W and 120W columns in AVTRON's SIP range, matched to medium outdoor areas — a school quad, a car park level, a covered platform. Like the rest of the range it registers to the phone system as a SIP endpoint, so paging a zone means dialling it, and group paging follows the phone system's own grouping. Amplification and network decoding are built into the column, so the speaker needs a network connection and a DC or PoE feed rather than an amplifier at the far end of a cable run. The aluminium enclosure in white finish is built for permanent outdoor mounting to a column or wall. - [AVTRON 40W SIP Column Speaker - AP-SC40](https://connixtech.co.nz/product/avtron-40w-sip-column-speaker-ap-sc40/): The AP-SC40 brings column-speaker directivity to SIP systems. At 520mm it suits entrances, walkways and courtyards where speech needs to carry along a space without washing off hard surfaces. The speaker registers to the phone system as a SIP endpoint, so it can be dialled individually or paged as part of a group, using the dial plan already in place. Power comes from PoE or a 24V DC feed, with decoding and amplification built into the column. Audio handles MP3, WMA and WAV at 8-512kbps across 130Hz-16kHz ±3dB. The white aluminium enclosure measures 520 x 227 x 125mm at 5kg for column or wall mounting outdoors, rated -30°C to 55°C. - [AVTRON 120W SIP Column Speaker - AP-SC120](https://connixtech.co.nz/product/avtron-120w-sip-column-speaker-ap-sc120/): The AP-SC120 is the full-height SIP column at nearly 1.4 metres, for the open distances that defeat smaller speakers: forecourts, interchanges, large yards and stadium approaches. A Class D stereo amplifier and 16-bit DAC digital audio processor sit inside the column, keeping the signal digital right up to amplification — which is why a long cable run does not degrade what comes out. SIP registration puts the column on the phone system as a dialable endpoint, alongside TCP, UDP and IGMP support for group broadcast. Codec support spans MP3, WMA and WAV at 8-512kbps across 130Hz-16kHz ±3dB. The white aluminium enclosure measures 1384 x 227 x 125mm at 12.5kg on a 24V DC supply, rated -30°C to 55°C. - [AVTRON 10W SIP PoE Ceiling Speaker - AP-SC10P](https://connixtech.co.nz/product/avtron-10w-sip-poe-ceiling-speaker-ap-sc10p/): The AP-SC10P is a ceiling speaker that behaves like a phone extension. Registering to the phone system over SIP, it can be dialled directly or joined into a paging group — no PA server, no separate control software. Amplifier, decoder and 6-inch full-range driver are all in the unit, fed by a single Cat cable carrying 802.3af or 802.3at PoE. Adding a zone is a patch, not a cable pull. Rated 6W RMS with 10W peak at 92dB SPL (1W/1M), it covers 100Hz-18kHz ±3dB with distortion at or under 1% and signal-to-noise of 85dB or better, handling MP3 and WAV at 8-512kbps. The white ABS enclosure with metal grille is 200mm diameter x 100mm needing a 165mm cutout, weighs under 1.5kg, and is rated -30°C to 55°C. - [AVTRON SIP Touch Screen Paging Station - AP-S9SPM](https://connixtech.co.nz/product/avtron-sip-touch-screen-paging-station-ap-s9spm/): The AP-S9SPM is the touch screen paging station in AVTRON's SIP range, and it scales where a keypad cannot: sites with dozens of zones, or zone lists that change as a building is reconfigured. Zones and groups are selected on a 7-inch TFT display, with intercom as well as broadcast paging. As a native SIP device it registers to the existing phone system rather than requiring PA-specific server software. A 3W monitor speaker carries the return path, the gooseneck microphone detaches for transport, and line input and output connect external audio sources. Audio samples at 8-32kHz with ADPCM encoding across 70Hz-12.5kHz. The full-metal black unit measures 50 x 210 x 150mm at under 2kg, drawing under 10W from DC power. - [AVTRON SIP Outdoor Intercom Terminal - AP-S9SOT](https://connixtech.co.nz/product/avtron-sip-outdoor-intercom-terminal-ap-s9sot/): The AP-S9SOT is the outdoor version of AVTRON's SIP intercom terminal, for gates, car park entries, yard access points and building frontages where a call point has to survive weather and handling. A single button places a hands-free call to programmed SIP telephones and devices, with a two-button option where callers need a choice of destination. Built-in microphone and speaker carry full two-way conversation. As a SIP endpoint it registers to the existing phone system, so after-hours diversion, escalation and call groups are configured with the tools the organisation already runs — no separate intercom management to maintain. Audio covers MP3, WAV and G.711 at 8-32kHz 16-bit. The stainless steel outdoor housing measures 160 x 240 x 42mm at under 1kg, drawing under 500mA from 12V DC, rated 0°C to 60°C. - [AVTRON SIP Indoor Intercom Terminal - AP-S9SIT](https://connixtech.co.nz/product/avtron-sip-indoor-intercom-terminal-ap-s9sit/): The AP-S9SIT is a fixed intercom point for SIP systems, placed where someone needs to reach help without a handset — a lift lobby, a stairwell, a plant room, an accessible toilet, a reception after hours. One button places a hands-free call to programmed SIP telephones and devices, with an optional two-button variant where a second destination is needed. Built-in microphone and speaker handle full two-way conversation. Because it is SIP-native it appears on the phone system like any other extension, so call routing, escalation and out-of-hours diversion are configured with the tools the organisation already uses. Audio covers MP3, WAV and G.711 at 8-32kHz 16-bit. The stainless steel housing measures 160 x 240 x 42mm at under 0.5kg, drawing under 500mA from 12V DC, rated 0°C to 60°C. - [AVTRON SIP Keypad Paging Station with Intercom - AP-S9KPM](https://connixtech.co.nz/product/avtron-sip-keypad-paging-station-with-intercom-ap-s9kpm/): The AP-S9KPM gives an operator hard keys instead of a touch screen — the right choice for a reception, security desk or nurses station where paging happens repeatedly and staff should not have to look at the device. Announcements go to an individual SIP speaker or a group, and the station supports intercom as well as one-way paging, so a call can be answered rather than only heard. Running SIP natively, it appears to the phone system as an endpoint, which keeps paging inside the organisation's existing dial plan and permissions. The detachable gooseneck microphone and monitor speaker follow the same pattern as the rest of the AVTRON SIP control range, with the full-metal desktop housing built for continuous use. - [AVTRON SIP Desktop Paging Telephone - AP-S9CTP](https://connixtech.co.nz/product/avtron-sip-desktop-paging-telephone-ap-s9ctp/): The AP-S9CTP is a desk telephone built for paging rather than conversation. It calls individual SIP speakers or whole groups, so an operator can address one corridor or the entire site from the same handsetless desktop unit. Because it speaks SIP natively, it registers to the phone system alongside ordinary extensions — no PA server, no proprietary control software, and paging rights governed by existing phone system policy. A 2.8-inch TFT display shows zone and call state, and a 3W monitor speaker carries the return path for intercom calls. The gooseneck microphone detaches for storage, and line input and output connect external sources. Audio samples at 8-32kHz with ADPCM encoding across a 70Hz-12.5kHz response tuned for speech. The full-metal black desktop unit measures 50 x 210 x 150mm at under 2kg, drawing under 10W. - [AVTRON 15W SIP PoE Mini Wall Amplifier - AP-S9A15](https://connixtech.co.nz/product/avtron-15w-sip-poe-mini-wall-amplifier-ap-s9a15/): The AP-S9A15 is the SIP version of AVTRON's mini wall amplifier. Rather than needing PA-specific server software, it registers to an IP phone system as an endpoint — so paging becomes an extension someone dials, and the phone system already on site becomes the paging system. That removes an entire software layer for organisations that have a PBX but no dedicated PA server, and it means paging permissions follow the phone system's existing rules. An ARM and DSP processor drives 2 x 15W directly into speakers, with an analogue audio output for feeding an external amplifier. Power comes from PoE or 12-24V DC. Codec support spans ADPCM, MP3, MP2, PCM, WMA and WAV at 8-44.1kHz, holding delay under 100ms with signal-to-noise of 90dB or better across 20Hz-22kHz. The full-metal black unit is 30 x 100 x 70mm at under 0.7kg. - [AVTRON Heavy Duty Press-to-Talk Paging Microphone - AP-PT211](https://connixtech.co.nz/product/avtron-heavy-duty-press-to-talk-paging-microphone-ap-pt211/): The AP-PT211 is built for the announcement positions that punish equipment: factory floors, transport depots, gatehouses and plant rooms. A press-type transfer switch replaces the delicate toggles that fail first in dusty, wet or high-traffic environments. The heavy duty ABS body carries a rubber sleeve to absorb knocks and drops, and the coiled cable retracts out of the way rather than lying across a console. A mounting hook holds the microphone in place between calls. The dynamic super-cardioid capsule runs 100Hz-6kHz at 500 ohms — a deliberately speech-focused range that cuts machinery rumble and keeps announcements intelligible over noise. Termination is an aviation-type connector, and the unit weighs under 250g. - [AVTRON 10 Zone Keypad Paging Station - AP-PS210](https://connixtech.co.nz/product/avtron-10-zone-keypad-paging-station-ap-ps210/): The AP-PS210 is the remote paging position for an AP-MC210 based system. Each station addresses ten zones, and up to eight stations can run on one controller for a total of 80 zones — so reception, security, dispatch and management can each page from where they work. Multiple priority levels resolve the situation where two people page at once, which on a single-station system simply does not arise but on a multi-station site happens regularly. A built-in chime precedes announcements so listeners orient before the message begins, and long distance audio transmission means stations can sit well away from the rack. The gooseneck microphone input is 600 ohm 5mV unbalanced on XLR, with a 10k ohm unbalanced line output. Response covers 100Hz-16kHz with signal-to-noise better than 70dB and distortion under 0.5% at 1kHz. The full-metal desktop unit is 80 x 240 x 170mm at under 2.5kg on 24V DC, drawing under 6W. - [AVTRON 4 x 500W Class D Four Channel Power Amplifier - AP-PCD450](https://connixtech.co.nz/product/avtron-4-x-500w-class-d-four-channel-power-amplifier-ap-pcd450/): The AP-PCD450 is the highest-output amplifier in AVTRON's Class D range, delivering 500W across each of four channels for demanding professional environments and large-scale installations. Switching power technology delivers that performance at low consumption, and the compact 1U height fits standard 19-inch racks — a space-saving setup where four separate amplifiers would otherwise fill a cabinet. Every channel offers 8 ohm and 100V speaker outputs with balanced Phoenix line inputs and individual gain control, plus high-cut filters on all channels for precise tuning per zone. An auto standby feature saves energy during periods of inactivity, and real-time status indicators cover protection, clip, input and output on each channel. - [AVTRON 4 x 350W Class D Four Channel Power Amplifier - AP-PCD435](https://connixtech.co.nz/product/avtron-4-x-350w-class-d-four-channel-power-amplifier-ap-pcd435/): The AP-PCD435 delivers 350W on each of four channels from a single rack unit — 1.4kW of installed audio in 1U, for professional and commercial systems covering several large zones. Advanced switching power technology provides that output at minimal consumption, which is what keeps a chassis this dense thermally viable in a standard 19-inch rack. Each of the four channels supports 8 ohm and 100V speaker outputs, with a balanced line input on a Phoenix connector and independent gain control. High-cut filters are available on all channels to optimise performance for speech or music. A built-in auto standby function reduces consumption during idle periods, and real-time indicators per channel cover protection, clip, input and output. Protection spans short circuit, overload, high temperature and clip, from a 230V AC and 24V DC supply. - [AVTRON 4 x 240W Class D Four Channel Power Amplifier - AP-PCD424](https://connixtech.co.nz/product/avtron-4-x-240w-class-d-four-channel-power-amplifier-ap-pcd424/): The AP-PCD424 delivers 240W on each of four channels from a 1U chassis — nearly a kilowatt of installed audio in one rack unit, aimed at commercial systems covering several substantial zones. All four channels provide 8 ohm and 100V speaker outputs with balanced Phoenix line inputs, individual gain control and per-channel high-cut filters, so each zone is set independently. Switching power technology keeps energy consumption low without compromising output or sound quality, which is what makes this channel density workable in a standard 19-inch rack. Built-in auto standby conserves power during inactivity, and separate indicators on each channel cover protection, clip, input and output. Protection spans short circuit, overload, high temperature and clip, with a 230V AC and 24V DC supply. - [AVTRON 4 x 120W Class D Four Channel Power Amplifier - AP-PCD412](https://connixtech.co.nz/product/avtron-4-x-120w-class-d-four-channel-power-amplifier-ap-pcd412/): The AP-PCD412 fits four independent 120W channels into one rack unit, engineered for multi-zone systems where four areas need separate amplification but rack space does not allow four boxes. Each of the four channels supports 8 ohm and 100V speaker outputs with a balanced Phoenix line input, independent gain control and its own high-cut filter, so the zones can be tuned individually rather than sharing one setting. Advanced switching power technology delivers clean output at minimal consumption, keeping the slim 1U format practical in space-constrained environments. Automatic standby reduces energy use during idle times, and individual indicators per channel cover protection, clip, input and output. - [AVTRON 2 x 500W Class D Two Channel Power Amplifier - AP-PCD250](https://connixtech.co.nz/product/avtron-2-x-500w-class-d-two-channel-power-amplifier-ap-pcd250/): The AP-PCD250 is the largest two channel amplifier in AVTRON's Class D range, delivering 500W per channel for professional systems where output and reliability both matter. Modern switching power technology provides that output while keeping consumption low, and the 1U height makes it viable in compact 19-inch installations where space and heat management are critical. Each channel supports 8 ohm and 100V speaker outputs with a balanced Phoenix line input and separate gain control for accurate level setting. Both channels include a high-cut filter for audio shaping. Auto standby reduces power use when the system is idle, and separate LED indicators per channel cover protection, clip, input and output for monitoring and system safety. - [AVTRON 2 x 350W Class D Two Channel Power Amplifier - AP-PCD235](https://connixtech.co.nz/product/avtron-2-x-350w-class-d-two-channel-power-amplifier-ap-pcd235/): The AP-PCD235 delivers 350W on each of two channels from a single rack unit, serving two large zones — or one large zone in a bridged configuration — without the rack space two separate amplifiers would need. Advanced switching power technology keeps consumption down while maintaining strong output, and the 1U height suits installations where both space and heat management are tight. Each channel supports 8 ohm and 100V speaker outputs and has a balanced Phoenix line input with independent gain control. A per-channel high-cut filter allows precise tuning for speech or music. Auto standby conserves energy during inactivity, and real-time LED indicators for protection, clip, input and output are provided on both channels for at-a-glance monitoring. - [AVTRON 2 x 240W Class D Two Channel Power Amplifier - AP-PCD224](https://connixtech.co.nz/product/avtron-2-x-240w-class-d-two-channel-power-amplifier-ap-pcd224/): The AP-PCD224 provides 240W on each of two independent channels from a 1U chassis, giving two substantial zones their own amplification without doubling rack space. Switching power technology keeps energy use and heat low while the amplifier delivers full output, which is what makes this density practical in a populated comms cabinet. Each channel carries its own balanced Phoenix line input with gain control and separate 8 ohm and 100V speaker outputs, plus a high-cut filter for shaping speech-focused zones. Auto standby reduces consumption during quiet periods, and per-channel indicators for protection, clip, input and output make front-panel diagnosis straightforward. Protection covers short circuit, overload, high temperature, clip and DC, on a 230V AC and 24V DC supply. - [AVTRON 2 x 120W Class D Two Channel Power Amplifier - AP-PCD212](https://connixtech.co.nz/product/avtron-2-x-120w-class-d-two-channel-power-amplifier-ap-pcd212/): The AP-PCD212 puts two independent 120W channels in a single rack unit, which is the efficient answer when a site needs two zones amplified from one position rather than two separate boxes. Each channel has its own balanced line input, gain control and speaker outputs for 8 ohm and 100V, so the two zones can differ in both level and speaker infrastructure. Class D switching operation keeps heat and consumption low enough for 1U packaging, and auto standby trims idle draw further. Per-channel indicators report protection, clip, input and output, with short circuit, overload, high temperature, clip and DC protection on both channels. Power is 230V AC with 24V DC backup. - [AVTRON 500W Class D Single Channel Power Amplifier - AP-PCD150](https://connixtech.co.nz/product/avtron-500w-class-d-single-channel-power-amplifier-ap-pcd150/): The AP-PCD150 is the highest-rated single channel amplifier in AVTRON's Class D range, putting 500W into one rack unit for the largest single zones on a distributed system. Switching power technology keeps the amplifier efficient enough to run at this rating in 1U without excessive heat — the practical constraint that decides whether a rack needs forced ventilation. Separate 8 ohm and 100V speaker outputs are provided, with a balanced line input on a Phoenix connector and gain level control. A switchable high-cut filter shapes the output where speech intelligibility is the priority. Built-in auto standby reduces consumption when idle. Separate indicators cover protection, clip, input and output, backed by short circuit, overload, high temperature, clip and DC protection. Supply is 230V AC with 24V DC. - [AVTRON 350W Class D Single Channel Power Amplifier - AP-PCD135](https://connixtech.co.nz/product/avtron-350w-class-d-single-channel-power-amplifier-ap-pcd135/): The AP-PCD135 delivers 350W from a single 1U chassis, aimed at larger zones on distributed systems — a warehouse aisle group, a sports hall, an outdoor horn array. Class D switching operation keeps consumption and heat output down, which matters as much for the surrounding rack equipment as for the amplifier itself. Separate 8 ohm and 100V speaker outputs handle both low-impedance and line-distributed loads. The balanced Phoenix line input includes gain level control, and the output high-cut filter can be switched in to favour intelligibility. Auto standby is available to cut idle consumption, and separate indicators cover protection, clip, input and output. Protection spans short circuit, overload, high temperature, clip and DC, with power from 230V AC and 24V DC. - [AVTRON 240W Class D Single Channel Power Amplifier - AP-PCD124](https://connixtech.co.nz/product/avtron-240w-class-d-single-channel-power-amplifier-ap-pcd124/): The AP-PCD124 doubles the output of the 120W model in the same 1U footprint, which is the point of Class D in installed audio: more power per rack unit, less heat to remove. Protection is comprehensive — short circuit, overload, high temperature, clip and DC — with separate indicators for protection, clip, input and output so a fault is diagnosed from the front panel rather than by substitution. Separate 8 ohm and 100V speaker outputs cover low-impedance and distributed line installations. The balanced line input uses a Phoenix connector with gain level control, and the switchable high-cut filter trims high frequencies where speech clarity matters more than bandwidth. Auto standby reduces consumption when the system is idle. Power is 230V AC with 24V DC backup for continued operation through a mains failure. - [AVTRON 120W Class D Single Channel Power Amplifier - AP-PCD112](https://connixtech.co.nz/product/avtron-120w-class-d-single-channel-power-amplifier-ap-pcd112/): The AP-PCD112 is a single-channel power amplifier for installations that need clean output without a mixer attached — a zone fed from a matrix, an overflow room, an added area on an existing system. Switching power technology and Class D operation keep both consumption and heat generation low, which is what allows 120W in a 1U chassis without the ventilation clearance a linear amplifier of the same rating would demand. Separate speaker outputs are provided for 8 ohm and 100V systems, so the same amplifier suits a low-impedance pair or a distributed line. The balanced line input arrives on a Phoenix connector with gain control, and a switchable high-cut filter tailors the output for speech. Auto standby can be switched on to cut consumption during idle periods. Separate indicators report protection, clip, input and output state, with full short circuit, overload, high temperature, clip and DC protection. Power is 230V AC with 24V DC backup. - [AVTRON 20W Outdoor Projection Speaker - AP-P26](https://connixtech.co.nz/product/avtron-20w-outdoor-projection-speaker-ap-p26/): The AP-P26 is the lightweight option among AVTRON's 20W projection speakers, using an ABS enclosure with metal grille rather than full metal construction. At under 1.4kg it weighs less than half the metal-bodied AP-P25, which changes what it can be mounted to — light canopies, timber structures and existing brackets that would not take a 3kg speaker. A 6.5-inch polypropylene cone woofer covers 150Hz-17kHz with 92dB sensitivity and maximum output to 101dB, keeping speech clear in single-direction outdoor coverage. Taps are 20W, 10W and 5W on 70V or 100V line, with IP66 protection and a waterproof cable tail gland. It measures 180mm diameter x 250mm in white with a built-in wall bracket for wall or ceiling mounting. - [AVTRON 20W Dual Direction Projection Speaker - AP-P25D](https://connixtech.co.nz/product/avtron-20w-dual-direction-projection-speaker-ap-p25d/): The AP-P25D is the highest-output projection speaker in AVTRON's range, pairing two 6.5-inch full-range woofers firing in opposite directions from a single housing. It covers both directions of a long space — a covered walkway, a station platform, a market arcade — from one mounting point, with 92dB sensitivity and maximum output to 104dB. Response runs 110Hz-15kHz, wide enough for background music as well as announcements, which distinguishes projection speakers from the horns often used in the same positions. Taps are 20W, 10W and 5W on 70V or 100V line. The full metal enclosure with grille is IP66 rated with a waterproof cable tail gland, measuring 170mm diameter x 250mm at under 3.5kg in white. - [AVTRON 20W Single Direction Projection Speaker - AP-P25](https://connixtech.co.nz/product/avtron-20w-single-direction-projection-speaker-ap-p25/): The AP-P25 steps up to a 6.5-inch woofer and 20W, for projection positions that need more level or must reach further than the 10W model manages. The larger driver extends the low end to 110Hz across a 110Hz-15kHz response, giving announcements more weight and background music more body outdoors. Sensitivity is 90dB at 1W/1M with maximum output to 104dB. The full metal enclosure and grille are IP66 rated, with a waterproof cable tail gland sealing the wiring entry. Taps are 20W, 10W and 5W on 70V or 100V line, with a built-in bracket for wall or ceiling mounting. It measures 170mm diameter x 250mm at under 3kg in white. - [AVTRON 10W Dual Direction Projection Speaker - AP-P24D](https://connixtech.co.nz/product/avtron-10w-dual-direction-projection-speaker-ap-p24d/): The AP-P24D fires in two directions from one housing, which halves the hardware where coverage is needed both ways along a corridor, walkway or platform. Two 5-inch full-range woofers give it 92dB sensitivity — slightly higher than the single-direction model — across 130Hz-17kHz with maximum output to 101dB. Mounting one dual unit rather than two singles also halves the cable runs and the fixings, which matters on structures where every penetration is a waterproofing decision. Taps are 10W, 5W and 2.5W on 70V or 100V line. The full metal enclosure with grille is IP66 rated with a waterproof cable tail gland, measuring 140mm diameter x 210mm at under 2.9kg in white, with a built-in wall bracket. - [AVTRON 10W Single Direction Projection Speaker - AP-P24](https://connixtech.co.nz/product/avtron-10w-single-direction-projection-speaker-ap-p24/): The AP-P24 is a projection speaker — an aimed cylinder that throws sound in one direction rather than spreading it, useful along walkways, platforms and under canopies where coverage needs to follow a path. A 5-inch full-range woofer covers 130Hz-17kHz with 90dB sensitivity and maximum output to 101dB, giving it more musical range than a horn of the same power. The full metal enclosure and grille with IP66 rating suit permanent outdoor mounting, and the waterproof cable tail gland seals the wiring entry — the point where outdoor speakers most often fail. Taps are 10W, 5W and 2.5W on 70V or 100V line, with a built-in bracket for wall or ceiling mounting. It measures 140mm diameter x 210mm at under 2.5kg in white. - [AVTRON 30W PoE IP Two-Way Wall Speaker - AP-NW30](https://connixtech.co.nz/product/avtron-30w-poe-ip-two-way-wall-speaker-ap-nw30/): The AP-NW30 is a network audio endpoint in wall speaker form: IP decoding, Class D amplification and a 5-inch two-way driver in one unit, fed by a single Cat cable. IEEE 802.3at PoE carries power, audio and control together, so adding a zone means patching a switch port. Support for up to 1,200 zones allows multi-group and multi-zone configurations broadcasting different content simultaneously. Volume is adjustable over the network rather than at the speaker, which matters on ceilings and high walls where physical access means a ladder. Paging prioritisation ensures announcements displace background music automatically. A 12V DC backup power input keeps the speaker live through a mains or PoE failure — important where the system doubles as voice alarm. It suits schools, offices, malls and large facilities. - [Hikvision 2-Wire Video Intercom Kit - DS-KIS703Y-P](https://connixtech.co.nz/product/hikvision-2-wire-video-intercom-kit-ds-kis703y-p/): The DS-KIS703Y-P is a complete one-to-one intercom in a single box — indoor station, door station and power supply — so a house or single tenancy needs nothing else specified. Running over two-core cable is the point: an existing analogue intercom's wiring can be reused, which turns a rewire into a swap. That is usually the difference between a job going ahead and being deferred. The door station carries a 2MP camera with 140° x 85° coverage, WDR and IR to 3m, a single call button, IP65 rating and two-lock control with 12V 500mA output to drive an electric lock directly. The 7-inch 1024 x 600 touch screen indoor station handles calls, door release and live view, with Hik-Connect app control for answering and unlocking remotely, a setup wizard for commissioning, and voice messages when nobody answers. Supplied for surface mounting with the power supply included. - [AVTRON 30W PoE IP Outdoor Horn Speaker - AP-NH30](https://connixtech.co.nz/product/avtron-30w-poe-ip-outdoor-horn-speaker-ap-nh30/): The AP-NH30 combines IP streaming, decoding, amplification and the driver into one outdoor horn, for public address and voice alarm systems where every extra box in the chain is another thing to weatherproof. IEEE 802.3at PoE carries power, control and audio down a single network cable, and the unit also runs on non-PoE networks with a local supply. That single-cable approach is what makes large outdoor deployments practical. System capacity reaches 6,000 zones, so it suits estates and campuses rather than just single buildings, carrying background music, paging and voice alarm on the same infrastructure. IP66 waterproof and dustproof rating covers severe outdoor environments, and connection over existing LAN, WAN or internet keeps additional cabling to a minimum. - [Hikvision 10.1-Inch Android All-in-One Indoor Station - DS-KH9510-WTE1](https://connixtech.co.nz/product/hikvision-10-1-inch-android-all-in-one-indoor-station-ds-kh9510-wte1/): The DS-KH9510-WTE1 combines intercom, Android tablet and wireless intrusion panel in one 10.1-inch wall unit. The built-in wireless intrusion panel is what separates it from the other indoor stations: the household's alarm system is armed, disarmed and managed here, with no separate keypad on the wall beside it. It receives seven seconds of video verification from alarm systems, so an activation arrives with footage attached rather than as a bare event — the difference between knowing something triggered and knowing what triggered it. Android app installation and open third-party software integration allow building management or concierge tools to run on the same panel, with Hik-Connect built in for all-day video intercom and live view on a phone. The 10.1-inch capacitive IPS runs 1024 x 600 with 1GB RAM and 8GB storage, eight alarm inputs, RS-485, Wi-Fi 802.11 b/g/n, 16 linked cameras and 17 linked doorphones. Finished in white with micro SD support. - [AVTRON 60W IP Network Column Speaker - AP-NC60](https://connixtech.co.nz/product/avtron-60w-ip-network-column-speaker-ap-nc60/): The AP-NC60 is the mid-size column at 952mm, throwing further than the 520mm model while staying manageable on a standard wall or pole fixing. The taller array narrows vertical dispersion, putting more energy along the listening plane and less into ceilings, canopies and hard ground — the practical reason columns outperform point-source speakers in long reverberant spaces. Network decoding and amplification are built in, powered by PoE or 24V DC. Audio handles MP3, WMA and WAV at 8-512kbps across 130Hz-16kHz ±3dB. The white aluminium enclosure measures 952 x 227 x 125mm at 8.6kg, mounts to a column or wall outdoors, and is rated -30°C to 55°C. - [Hikvision 7-Inch Android All-in-One Indoor Station - DS-KH9310-WTE1](https://connixtech.co.nz/product/hikvision-7-inch-android-all-in-one-indoor-station-ds-kh9310-wte1/): The DS-KH9310-WTE1 runs full Android 10 rather than the embedded Linux of the other stations, which changes what it is: a tablet on the wall that happens to be an intercom. Third-party Android apps can be installed, and third-party software integration is supported — so a building management system, a booking app or a concierge tool can live on the same panel as the door intercom. That matters for apartment developments and serviced buildings that want one screen in the entry rather than an intercom beside a tablet beside a light switch. Hik-Connect is built in for all-in-one management of Hikvision devices from the panel itself. The 7-inch capacitive TFT runs 1024 x 600 with 2GB RAM and 8GB storage, H.265 and H.264 video, 2.4GHz Wi-Fi, 16 linked indoor extensions, 17 linked doorphones and 16 linked cameras. Micro SD storage is supported. Finished in white. - [Hikvision 10.1-Inch Ultra Series IP Indoor Station - DS-KH8520-WTE1](https://connixtech.co.nz/product/hikvision-10-1-inch-ultra-series-ip-indoor-station-ds-kh8520-wte1/): The DS-KH8520-WTE1 is the 10.1-inch station in the Ultra range, for entrance halls and kitchens where the panel doubles as the household's main control surface. At 22.55mm deep it sits nearly flush against the wall despite the screen size — the detail that keeps a large panel from looking like equipment. The design carries no physical buttons or indicators at all; everything happens on the touch screen, which is what allows the clean front face. Standard IEEE802.3af PoE powers the station over its network cable, with 12V DC as an alternative, drawing 6W or less. Wi-Fi 802.11 b/g/n is built in. Live view covers door stations and public-area cameras, with voice messages when unanswered, alarm linkage to a monitoring centre and elevator access control. The interface supports English plus Arabic, French, Russian, Spanish, Italian, German, Polish, Turkish and Portuguese among others. It measures 254 x 166 x 22.55mm for surface mounting. - [AVTRON 40W IP66 Outdoor IP Column Speaker - AP-NC40P](https://connixtech.co.nz/product/avtron-40w-ip66-outdoor-ip-column-speaker-ap-nc40p/): The AP-NC40P is a complete outdoor IP audio endpoint in a single column: network decoder, Class D amplifier and two-way speaker array, needing only a network connection to join the system. The enclosure is all-metal extruded aluminium alloy with cast aluminium top and bottom plates — a construction standard well above the ABS used on most outdoor speakers, and the reason it holds up in parks, gardens, playgrounds and car parks over years rather than seasons. IP66 rating covers rain and dust, and the column works over existing LAN, WAN or internet infrastructure rather than requiring dedicated audio cabling across a site. Rated output is 40W or 60W with maximum handling of 80W or 100W. Supplied metal mounting brackets make installation secure, and pairing it with an IP microphone gives live paging to the zone. - [Hikvision 7-Inch Flush Mount Metal IP Indoor Station - DS-KH8381-WTE1-FLUSH](https://connixtech.co.nz/product/hikvision-7-inch-flush-mount-metal-ip-indoor-station-ds-kh8381-wte1-flush/): The DS-KH8381-WTE1/Flush recesses into the wall with a metal front, which is why it gets specified in apartment lobbies and higher-end fit-outs where a surface-mounted plastic panel would look wrong. A single physical button opens the door without waking the screen or navigating a menu — the action people perform most, made deliberate rather than buried. IEEE802.3at PoE is the significant electrical difference: at up to 30W it powers both the station and an electric lock from the network cable, removing the separate lock supply a 802.3af station would need. Interfaces are unusually complete for an indoor station — alarm inputs, RS-485, relay outputs and a TF card slot — so it can act as the wiring point for door hardware rather than just a display. The 7-inch capacitive IPS runs 1024 x 600 with H.265 and H.264 video, 16 linked indoor extensions, elevator access control and Hik-Connect app control. Supports both flush and surface mounting; finished in black. - [Hikvision 7-Inch Ultra Series IPS Indoor Station - DS-KH8350-WTE1](https://connixtech.co.nz/product/hikvision-7-inch-ultra-series-ips-indoor-station-ds-kh8350-wte1/): The DS-KH8350-WTE1 is the Ultra Series 7-inch station, and a Red Dot design award winner — which in practice means it is the model to specify when the client cares how the panel looks on the wall. The IPS screen is the functional upgrade over the Pro Series TFT: wider viewing angles, so the display stays correct when viewed from along a hallway rather than straight on. Eight alarm inputs, against four on the entry-level stations, let the indoor station double as the alarm interface for an apartment — door contacts, PIRs and panic buttons wired directly to the panel. Whole-system configuration runs from the screen with a setup wizard, alongside live view of door stations and public-area cameras, voice messages when unanswered and elevator access control. The 7-inch capacitive IPS runs 1024 x 600 with 2.4GHz Wi-Fi, 16 linked indoor extensions, 17 linked doorphones and 16 linked cameras. - [AVTRON 40W IP Network Column Speaker - AP-NC40](https://connixtech.co.nz/product/avtron-40w-ip-network-column-speaker-ap-nc40/): The AP-NC40 is the compact column in the AVTRON IP range, at 520mm tall. Column speakers project speech along a space rather than spraying it in all directions, which is why they suit walkways, platforms, courtyards and building frontages where reverberation would otherwise destroy intelligibility. Network decoding and amplification are built in, so the speaker takes a network connection and either PoE or a 24V DC feed — no amplifier rack at the far end of a site. Audio covers MP3, WMA and WAV at 8-512kbps with a response of 130Hz-16kHz ±3dB, deliberately rolled off at the bottom to keep speech clear outdoors. The white aluminium enclosure measures 520 x 227 x 125mm at 5kg, mounts to a column or wall, and operates from -30°C to 55°C. - [Hikvision 7-Inch G2 IP Indoor Station White - DS-KH6350-WTE1-WHITE](https://connixtech.co.nz/product/hikvision-7-inch-g2-ip-indoor-station-white-ds-kh6350-wte1-white/): The white G2 indoor station carries the same electronics as the black model — the choice is purely how it reads against the wall it is mounted on. H.265 video support is the substantive difference from the earlier KH6320 generation, roughly halving stream bandwidth when multiple apartments view door stations and cameras simultaneously. Audio covers Opus, AAC-LD, AAC-LC, G.726 and G.722.1 alongside G.711, improving call quality over SIP. The station configures the whole intercom system from its own screen with a setup wizard — no PC required — and handles live view of door stations and public-area cameras, voice messages when unanswered, alarm linkage and elevator access control. The 7-inch capacitive TFT runs 1024 x 600, with 200 pictures and 200 alarm records on a TF card, 16 linked indoor extensions and 17 linked doorphones. - [AVTRON 120W IP Network Column Speaker - AP-NC120](https://connixtech.co.nz/product/avtron-120w-ip-network-column-speaker-ap-nc120/): The AP-NC120 is the full-height column in the AVTRON IP range at nearly 1.4 metres, built for the distances that defeat smaller speakers: large forecourts, transport interchanges, stadium approaches and open industrial sites. A Class D stereo amplifier and a 16-bit DAC digital audio processor are built into the column, so the signal stays digital until the last possible point — the reason a long cable run to this speaker does not degrade what comes out of it. Networking covers TCP, UDP and IGMP with codec support across MP3, WMA and WAV at 8-512kbps. Response runs 130Hz-16kHz ±3dB, focused on speech intelligibility outdoors. The white aluminium enclosure measures 1384 x 227 x 125mm at 12.5kg, takes a 24V DC supply, mounts to a column or wall, and operates from -30°C to 55°C. - [Hikvision 7-Inch G2 IP Indoor Station Black - DS-KH6350-WTE1](https://connixtech.co.nz/product/hikvision-7-inch-g2-ip-indoor-station-black-ds-kh6350-wte1/): The Hikvision DS-KH6350-WTE1 Indoor Station is a smart video intercom monitor designed for residential villas and modern home access control systems. It allows occupants to communicate with visitors, view live video from a compatible door station and conveniently manage entrance access from indoors. Designed to work with compatible Hikvision video intercom systems, the indoor station provides convenient visitor communication and door unlocking functionality. It offers an integrated interface for monitoring the entrance and communicating with visitors, helping improve residential security and everyday convenience. When integrated with a compatible Hikvision system, it provides a practical indoor solution for managing visitor calls and door access in villas, houses and other residential properties. The rest follows the range: whole-system configuration from the screen with a setup wizard, live view of door stations and public-area cameras, voice messages when unanswered, alarm linkage to a monitoring centre, and elevator access control. The 7-inch capacitive TFT runs 1024 x 600, with 16 linked indoor extensions and 17 linked doorphones. Finished in black. - [AVTRON IP Network PA System Server Software - AP-N9ESF](https://connixtech.co.nz/product/avtron-ip-network-pa-system-server-software-ap-n9esf/): The AP-N9ESF is the management layer of an AVTRON IP network PA system — the software that turns a collection of network amplifiers, speakers and paging stations into a single addressable system. One server instance manages 1000 devices, with an unlimited-device option available, and a clustered server architecture extends capacity beyond what any single machine handles. That matters on campuses and multi-site estates, where the device count grows building by building rather than all at once. Control and monitoring of every endpoint runs from one console: zone assignment, paging routing, scheduled programme and device status. Licensing is per deployment — talk to Connixtech about sizing for your site. - [Hikvision 7-Inch 2-Wire IP Indoor Station - DS-KH6320Y-WTE2](https://connixtech.co.nz/product/hikvision-7-inch-2-wire-ip-indoor-station-ds-kh6320y-wte2/): The DS-KH6320Y-WTE2 runs a full IP intercom over ordinary two-core cable, which is what makes it the answer for retrofits. Older buildings already have two-wire runs from an existing analogue intercom. Replacing that cabling with Cat6 through occupied apartments is disruptive and often impossible; this station reuses what is there and still delivers IP features, app control and video. The 7-inch IPS touch screen at 1024 x 600 gives wider viewing angles than a standard TFT, which matters on a wall-mounted panel viewed from an angle rather than head-on. Functionality matches the IP models: Hik-Connect app control for remote answering and door release, live view of door stations and public-area cameras, voice messages when unanswered, alarm linkage and elevator access control. Capacity is 200 pictures and 200 alarm records with a TF card, 16 linked indoor extensions, 17 IP doorphones and 16 linked cameras, with 2.4GHz Wi-Fi. Finished in black. - [AVTRON 7-Inch Touch Screen IP Paging Station - AP-N9EPM30](https://connixtech.co.nz/product/avtron-7-inch-touch-screen-ip-paging-station-ap-n9epm30/): The AP-N9EPM30 is the touch screen counterpart to the keypad paging station, and it earns its place on sites with many zones where a fixed keypad runs out of buttons. Zones are selected on a 7-inch TFT display — all zones, a group, an individual zone or an ad hoc selection — and paging can run two-way for confirmation rather than broadcast-only. An embedded operating system keeps the station appliance-like in reliability, and a 3W monitor speaker carries the return path clearly in a noisy office. Line and microphone inputs plus a line output handle external sources, and the gooseneck microphone detaches. Audio is MP3 and MP2 at 8-48kHz with signal-to-noise of 70dB or better across 20Hz-16kHz. The full-metal black unit measures 50 x 210 x 150mm at under 2.5kg, running from 12V DC at under 10W. - [Hikvision 7-Inch Pro Series IP Indoor Station - DS-KH6320-WTE1](https://connixtech.co.nz/product/hikvision-7-inch-pro-series-ip-indoor-station-ds-kh6320-wte1/): The DS-KH6320-WTE1 is the mainstream 7-inch indoor station, and the one most apartment and villa installations standardise on. The whole system is configured from this screen rather than from a PC, with a setup wizard for commissioning — which means a small installation needs no laptop, no software licence and no return visit to adjust settings. Live view covers the door station and cameras in public areas, so a resident can check the lobby or car park before going down. Voice messages are recorded when nobody answers the indoor station, and alarm linkage passes events to a monitoring centre. Elevator access control ties the intercom to lift calling — the feature that makes this station viable in multi-storey buildings rather than just houses. The 7-inch capacitive TFT runs 1024 x 600. Capacity is 200 pictures and 200 alarm records with a TF card, 16 linked indoor extensions, 17 linked doorphones and 16 linked cameras, over TCP/IP, SIP and RTSP. - [Hikvision 7-Inch Pro Series IP Indoor Station White - DS-KH6320-WTE-WHITE](https://connixtech.co.nz/product/hikvision-7-inch-pro-series-ip-indoor-station-white-ds-kh6320-wte-white/): The white version of the Pro Series 7-inch indoor station, for interiors where the black panel would sit awkwardly against light walls and joinery. The whole intercom system is configured from this screen with a setup wizard, so a residential or small commercial installation needs no PC and no separate software. Live view covers the door station and cameras in public areas, letting a resident check the lobby or car park before going down. Voice messages record when the station is unanswered, and alarm linkage notifies a monitoring centre. Elevator access control ties the intercom into lift calling for multi-storey buildings. The 7-inch capacitive TFT runs 1024 x 600. Capacity is 200 pictures and 200 alarm records with a TF card, 16 linked indoor extensions, 17 linked doorphones and 16 linked cameras over TCP/IP, SIP and RTSP with Hik-Connect app control. - [Hikvision 4.3-Inch Wi-Fi IP Indoor Station - DS-KH6110-WE1](https://connixtech.co.nz/product/hikvision-4-3-inch-wi-fi-ip-indoor-station-ds-kh6110-we1/): The DS-KH6110-WE1 is the entry point of Hikvision's IP indoor station range, sized for apartments and homes where a 7-inch panel would dominate the wall. Standard PoE means no separate power adaptor and no socket needed behind the station — one cable does power and network, which simplifies both new wiring and retrofits. Four custom touch buttons let each household map the functions it actually uses, rather than navigating menus for a routine action like unlocking the door or calling the gate. Hik-Connect app control extends the station to a phone for answering calls, opening the door and viewing live video away from home. Live view covers door stations and linked cameras. The 4.3-inch capacitive colour TFT runs 480 x 272 with nine touch buttons. Capacity is 200 events, 200 notices and 16 linked indoor extensions, with four alarm inputs, 2.4GHz Wi-Fi and wall or table mounting. - [Hikvision 2-Wire Modular Door Station Main Module - DS-KD8003Y-IME2](https://connixtech.co.nz/product/hikvision-2-wire-modular-door-station-main-module-ds-kd8003y-ime2/): The DS-KD8003Y-IME2 is the 2-Wire equivalent of the KD8 main module — the same modular door station, carried over two-core cable instead of Ethernet. It takes the same keypad, display, nametag and blank modules as the IP version and mounts in the same brackets and rain shields, so a 2-Wire retrofit is designed exactly like a new IP installation. The 2MP fisheye camera covers 146° horizontally and 82° vertically with WDR and IR supplement to 3m, keeping a caller in frame and visible at night regardless of where they stand. Two-lock control drives a door and a gate, with 12V 500mA output powering an electronic lock directly and no separate lock supply required. Capacity is 2,000 users, 500 linked indoor stations and 16 sub door stations, over TCP/IP, RTSP, IPv6 and ONVIF. IP65 rated with remote web configuration. - [AVTRON IP Keypad Desktop Paging Station - AP-N9EPM20](https://connixtech.co.nz/product/avtron-ip-keypad-desktop-paging-station-ap-n9epm20/): The AP-N9EPM20 is the keypad paging station for AVTRON network PA systems, aimed at operators who want physical keys rather than a touch screen — a reception desk, a security office, a control room where staff page without looking down. Zone selection covers all zones, group zones, individual zones and arbitrary selections, and paging can run two-way rather than broadcast-only. An embedded operating system runs the station, so it starts and stays running like an appliance instead of a computer. A 2W monitor speaker lets the operator hear the return path, and the gooseneck microphone detaches for storage. Auxiliary input and output are provided for external sources, with audio in MP3 and MP2 at 8-48kHz, signal-to-noise of 70dB or better across 20Hz-16kHz. The full-metal black desktop unit is 50 x 210 x 150mm at under 2.5kg on DC power, drawing under 10W. - [Hikvision Stainless Steel Modular Door Station Main Module - DS-KD8003-IME1-S](https://connixtech.co.nz/product/hikvision-stainless-steel-modular-door-station-main-module-ds-kd8003-ime1-s/): The stainless steel DS-KD8003-IME1/S is specified where the standard aluminium module will not survive or will not suit: coastal sites with salt exposure, high-traffic public entrances, and buildings where the entrance hardware is part of the architecture. Electronically it is the same module as the standard version — 2MP fisheye camera with 146° x 82° coverage, IR supplement lighting, WDR, single call button and two-lock control with 12V 500mA lock output. Capacity covers 2,000 users, 6,000 cards, 500 linked indoor stations and 16 sub door stations, with ONVIF and IPv6 alongside TCP/IP and RTSP. Standard PoE carries power and data on one cable, and the IP65 housing is configured remotely over the web. Pair it with the matching stainless keypad module and stainless brackets for a consistent frontage. - [Hikvision Surface Mount Door Station with Main Module - DS-KD8003-IME1-B-SURFACE](https://connixtech.co.nz/product/hikvision-surface-mount-door-station-with-main-module-ds-kd8003-ime1-b-surface/): The surface-mount variant of the KD8 main module ships with its mounting box, so the station fastens to the face of a wall rather than needing a cavity cut into it. That matters on solid brick, concrete, stone and heritage frontages where flush mounting means core drilling — and on jobs where the entrance is being retrofitted rather than built. Functionally it matches the flush module: a 2MP fisheye camera with 146° x 82° coverage, IR supplement lighting, WDR, a single call button, and two-lock control with 12V 500mA output to drive an electronic lock directly. Standard PoE carries power and network on one cable. Capacity is 2,000 users, 6,000 cards, 500 linked indoor stations and 16 sub door stations, in an IP65-rated housing configured remotely over the web. - [Hikvision IP Modular Door Station Main Module - DS-KD8003-IME1](https://connixtech.co.nz/product/hikvision-ip-modular-door-station-main-module-ds-kd8003-ime1/): The DS-KD8003-IME1 is the module every KD8 door station is built around. It carries the camera, microphone, speaker and call button, and the keypad, display, nametag and blank modules bolt on beside it as the entrance requires. A 2MP fisheye camera covers 146° horizontally and 82° vertically — wide enough that a visitor standing off to one side, or a child, is still in frame, which is the usual failing of narrow-lens door stations. IR supplement lighting and WDR keep the picture usable at night and against a bright sky behind the caller. Two-lock control runs both a door and a gate from the one module, and 12V 500mA output powers an electronic lock directly, so a simple installation needs no separate lock power supply. Standard PoE means one cable does power and network. Capacity covers 2,000 users, 6,000 cards, 500 linked indoor stations and 16 sub door stations. The IP65 housing is rated for outdoor mounting, and configuration is done remotely through the web interface. - [AVTRON IP PA Touch Screen Master Controller - AP-N9EMC](https://connixtech.co.nz/product/avtron-ip-pa-touch-screen-master-controller-ap-n9emc/): The AP-N9EMC puts an entire IP PA system behind a 15-inch industrial touch screen. Master server software is embedded in the unit, so the system does not depend on a separate Windows PC that someone will eventually reboot, patch or repurpose. Running on an embedded operating system, it is built to stay up continuously in the way a general-purpose computer is not — the difference that matters when the system is also a paging path. Operators get unified control of paging, zone selection and scheduled programme from a single panel, which keeps day-to-day use in the hands of reception or site staff rather than the AV contractor. - [Hikvision Stainless Steel Door Station Keypad Module - DS-KD-KP-S](https://connixtech.co.nz/product/hikvision-stainless-steel-door-station-keypad-module-ds-kd-kp-s/): The stainless steel keypad module matches the stainless main module, so a door station keeps one material and finish across every position rather than mixing aluminium and steel on the same frontage. PIN entry opens the door without a credential, and the keypad dials indoor stations directly for buildings where visitors enter an apartment number. IK07 impact rating on top of IP65 weather sealing is the reason to specify stainless on a public entrance — the keypad takes the most physical contact of any module, and stainless resists both the wear and the corrosion that follows scratched coatings. The module carries a network interface and two RS-485 connections, measures 98.2 x 100.2 x 33.7mm at 190g, draws 1W from a 12V DC supply, and operates from -40°C to 55°C. - [AVTRON GSM Telephone Integration Unit - AP-N9EGT](https://connixtech.co.nz/product/avtron-gsm-telephone-integration-unit-ap-n9egt/): The AP-N9EGT gives a PA system a phone number. An authorised caller dials the SIM in the unit and speaks live over the site's speakers — useful when the person who needs to make the announcement is not on site, and essential when the network is down but the mobile network is not. An ARM and DSP processor handles the audio path, and speakers or amplifiers connect directly to the unit. It operates over LAN or WAN through standard gateways and routers. A 2.8-inch LCD shows call and system state at the rack. The single SIM slot takes a standard mobile service. The full-metal black chassis measures 66 x 485 x 225mm at under 2.5kg, rack or table mounted, running from 200-240V AC with fuse protection. - [Hikvision Modular Door Station Keypad Module - DS-KD-KP](https://connixtech.co.nz/product/hikvision-modular-door-station-keypad-module-ds-kd-kp/): The DS-KD-KP adds PIN entry to a KD8 door station, so residents and staff can open the door without a card, fob or phone — the fallback that stops a forgotten credential becoming a call to the building manager. The same keypad dials indoor stations directly, which suits apartment buildings where visitors enter an apartment number rather than hunting through a nametag list. IK07 impact rating sits above the IP65 weather rating and is the specification that matters on a public entrance: the keypad is the part of a door station people press hard, hit with keys, and occasionally attack. Backlight compensation behind the buttons keeps the digits readable at night. The module measures 98.5 x 100 x 34.2mm, flush or surface mounts alongside the main module, draws 1W, and operates from -40°C to 55°C. - [Hikvision 6-Button Nametag Call Module - DS-KD-KK](https://connixtech.co.nz/product/hikvision-6-button-nametag-call-module-ds-kd-kk/): The DS-KD-KK gives a small building six labelled call buttons — one per apartment, tenancy or department — so a visitor presses a name rather than remembering a number. For a six-unit block or a small office building that is faster and less error-prone than a keypad or a scrolling display, and it needs no explanation to a first-time visitor or a delivery driver. Backlight compensation behind the nametags keeps names legible after dark, which is when a badly lit door station generates most of its wrong calls. The module is IP65 rated, measures 98.2 x 100.2 x 33.7mm, draws 2W or less, and operates from -40°C to 55°C. Multiple nametag modules can be combined for larger buildings. - [AVTRON Network Fire Alarm Interface Unit - AP-N9EFA](https://connixtech.co.nz/product/avtron-network-fire-alarm-interface-unit-ap-n9efa/): The AP-N9EFA is the link between fire detection and public address. Thirty-two dry contact inputs accept zone signals from a fire panel, and the unit converts each trigger into the correct broadcast on the IP PA system without an operator in the loop. Multiple interface units can be networked together where a site has more zones than a single unit covers, so the design scales with the building rather than capping at 32. A PTT microphone or auxiliary input allows live override, which is what a warden actually needs once an evacuation is underway and the pre-recorded message no longer fits the situation. One dry contact output feeds back to the panel or other systems. The 1U full-metal chassis is 44 x 483 x 258mm at under 3kg, running from 200-240V AC with fuse protection, rated for -10°C to 60°C. - [Hikvision 12-Button Nametag Call Module - DS-KD-K12](https://connixtech.co.nz/product/hikvision-12-button-nametag-call-module-ds-kd-k12/): The DS-KD-K12 doubles the call buttons of the six-button module, covering twelve tenancies from a single module position. On a twelve-unit building that means one module instead of two, which keeps the door station narrower and the bracket smaller — often the deciding factor on a narrow entry column or beside a door frame. Each button carries a nametag with backlight compensation behind it, so names stay readable at night without a separate light. The module is IP65 rated with an RS-485 connection to the main module, measures 98.2 x 100.2 x 33.7mm at 179g, draws 2W or less, and operates from -30°C to 55°C in flush or surface mounting. - [AVTRON 60W IP Network Mixer Power Amplifier - AP-N9EC60](https://connixtech.co.nz/product/avtron-60w-ip-network-mixer-power-amplifier-ap-n9ec60/): The AP-N9EC60 is the smallest amplifier in the AVTRON AP-N9EC series, which spans 60W to 500W on a common design. Sizing a zone is a matter of picking a rating rather than re-engineering the rack. Unlike 100V-only amplifiers, this series also drives 70V line and 8 ohm loads, which makes it useful in retrofits where the existing speaker infrastructure was not built to a single standard. Three microphone inputs and two line inputs handle local sources, and network audio is decoded on board across ADPCM, MP3, MP2 and PCM with delay under 100ms. The 144 x 32 LCD reports state at the rack. Distortion is held at or under 0.3% with signal-to-noise of 85dB or better across 20Hz-16kHz. The full-metal 2U chassis measures 88 x 483 x 370mm at under 11kg, drawing under 95W from 200-240V AC. - [Hikvision Modular Door Station Display Module - DS-KD-DIS](https://connixtech.co.nz/product/hikvision-modular-door-station-display-module-ds-kd-dis/): The DS-KD-DIS gives a door station a screen, replacing the fixed nametag strip with a contact list that can hold 2,000 entries and be edited from the system rather than reprinted. For any building with turnover — apartments, serviced offices, student accommodation — that is the difference between updating a name in software and sending someone out with a label kit. The 3.5-inch 320 x 480 TFT screen runs at 250 cd/m² with four physical buttons (up, down, OK, back) rather than a touch panel, which stays reliable in rain and with gloved hands. Multiple languages are supported. Visitors can dial a number directly or enter a PIN to unlock. The module is IP65 rated with backlight compensation, measures 98.5 x 100 x 34.2mm, draws 2.5W, and flush or surface mounts beside the main module. - [AVTRON 500W IP Network Mixer Power Amplifier - AP-N9EC500](https://connixtech.co.nz/product/avtron-500w-ip-network-mixer-power-amplifier-ap-n9ec500/): The AP-N9EC500 is the largest amplifier in the AP-N9EC series, for zones where speaker count and coverage area push past what a 350W tap can carry — large industrial floors, transport terminals, sports facilities. It keeps the series' three microphone and two line inputs plus 100V, 70V and 8 ohm speaker outputs, so the wiring approach does not change as a site scales up. Network paging and scheduled audio decode on board across ADPCM, MP3, MP2 and PCM with delay under 100ms. Distortion is at or under 0.3% and signal-to-noise 85dB or better across 20Hz-16kHz, with a 144 x 32 LCD for local status. The 2U full-metal chassis is 88 x 483 x 370mm at under 15kg, drawing 640W from 200-240V AC at 50-60Hz. - [Hikvision Modular Door Station Blank Module - DS-KD-BK](https://connixtech.co.nz/product/hikvision-modular-door-station-blank-module-ds-kd-bk/): The DS-KD-BK fills a module position that is not yet in use. Brackets come in fixed one, two and three-module sizes, so a station with fewer modules than positions leaves an open aperture — and an open aperture in an outdoor enclosure is a water and insect ingress point. Fitting a blank keeps the station sealed to IP65 and leaves the frontage looking deliberate rather than unfinished. It is also the practical way to plan ahead: specify a larger bracket at installation, blank the spare position, and add a keypad or display module later without changing the bracket or re-cutting the wall. The module measures 98.5 x 100 x 33.7mm and matches the finish and profile of the functional modules in the range. - [AVTRON 350W IP Network Mixer Power Amplifier - AP-N9EC35](https://connixtech.co.nz/product/avtron-350w-ip-network-mixer-power-amplifier-ap-n9ec35/): The AP-N9EC35 delivers 350W for the larger zones in an AP-N9EC-based system, while keeping the same front panel, input set and network behaviour as the rest of the series. Standardising on one amplifier family across a site means spares, commissioning and staff training carry over between zones — a practical advantage on estates where amplifiers are added year by year. Three microphone and two line inputs handle local audio, with 100V, 70V and 8 ohm speaker outputs. Network audio decodes on board with delay under 100ms, distortion at or under 0.3%, and signal-to-noise of 85dB or better across 20Hz-16kHz. The 2U full-metal chassis measures 88 x 483 x 370mm at under 15kg, drawing 485W from a 200-240V 50-60Hz supply. - [Hikvision Three Module Surface Mount Bracket - DS-KD-ACW3](https://connixtech.co.nz/product/hikvision-three-module-surface-mount-bracket-ds-kd-acw3/): The DS-KD-ACW3 is the three-position surface bracket, carrying a main camera module plus two others on a wall face with no cavity required. Three positions covers the common apartment-entrance combination — camera module, keypad and a nametag or display module — from a single mounting. The kit includes three module frames, three front panels, a button cover and the necessary accessories, in aviation aluminium at 500g. The cover measures 320.8 x 107 x 4mm with the installation frame at 320.8 x 107 x 32.7mm, rated -40°C to 55°C. A matching three-gang rain shield is available for exposed entrances. - [AVTRON 240W IP Network Mixer Power Amplifier - AP-N9EC240](https://connixtech.co.nz/product/avtron-240w-ip-network-mixer-power-amplifier-ap-n9ec240/): The AP-N9EC240 sits in the middle of the AP-N9EC series, matched to zones that have outgrown a 120W tap — a full school block, a hospital ward group, a mid-sized industrial building. Speaker outputs cover 100V and 70V line as well as 8 ohm, so a single amplifier model serves both new distributed installations and legacy low-impedance runs found in older buildings. Three microphone and two line inputs feed the mixer; network paging and scheduled programme decode on board across ADPCM, MP3, MP2 and PCM with delay under 100ms. The 144 x 32 LCD gives local status without a laptop. Distortion stays at or under 0.3% with signal-to-noise of 85dB or better across 20Hz-16kHz. The 2U chassis is 88 x 483 x 370mm at under 14kg, drawing 350W from 200-240V AC. - [Hikvision Stainless Steel Two Module Surface Bracket - DS-KD-ACW2-S](https://connixtech.co.nz/product/hikvision-stainless-steel-two-module-surface-bracket-ds-kd-acw2-s/): The DS-KD-ACW2/S surface-mounts a two-module door station — typically the main camera module plus a keypad, display or nametag module. Everything needed is in the kit: two module frames, two front panels, a button cover and fixings, so a two-module station goes up in one visit. The stainless steel cover over an aviation aluminium frame gives the visible corrosion resistance stainless is specified for while keeping the frame light enough to handle on a ladder. The cover measures 219 x 107 x 4mm with the frame at 219 x 107 x 32.7mm, rated -40°C to 60°C and 10% to 95% non-condensing humidity. - [Hikvision Two Module Surface Mount Bracket - DS-KD-ACW2](https://connixtech.co.nz/product/hikvision-two-module-surface-mount-bracket-ds-kd-acw2/): The DS-KD-ACW2 surface-mounts a two-module door station without any cavity work — main camera module plus a keypad, display or nametag module in one frame. The kit is complete: two module frames, two front panels, a button cover and the necessary accessories. Aviation aluminium keeps weight to 420g, which matters when the bracket is being held in position against a wall while the first fixings go in. The cover measures 219 x 107 x 4mm with the installation frame at 219 x 107 x 32.7mm, rated -40°C to 55°C at 10% to 95% humidity. - [AVTRON 120W IP Network Mixer Power Amplifier - AP-N9EC120](https://connixtech.co.nz/product/avtron-120w-ip-network-mixer-power-amplifier-ap-n9ec120/): The AP-N9EC120 is designed to be one component of a working IP audio system rather than a standalone box — server software, paging microphone, network amplifier and ordinary analogue speakers combine into an addressable system without specialist endpoint hardware at every speaker. That approach suits warehouses, hospitals, schools and offices with many small rooms: the speakers stay conventional and inexpensive, and the intelligence sits in the amplifier. Three microphone and two line inputs cover local sources, with 100V, 70V and 8 ohm speaker outputs for mixed installed infrastructure. Network audio decodes on board with delay under 100ms, distortion at or under 0.3%, and signal-to-noise of 85dB or better. The 2U full-metal chassis is 88 x 483 x 370mm at under 12kg, drawing 175W from a 200-240V 50-60Hz supply. - [Hikvision Stainless Steel Single Module Surface Bracket - DS-KD-ACW1-S](https://connixtech.co.nz/product/hikvision-stainless-steel-single-module-surface-bracket-ds-kd-acw1-s/): The DS-KD-ACW1/S surface-mounts a single-module door station on a wall face, with no cavity or back box required. The kit is complete — one module frame, one front panel and the necessary fixings — so the installation does not stall waiting on a separate accessory. Construction pairs a stainless steel cover with an aviation aluminium installation frame: stainless on the visible face for corrosion resistance and finish, aluminium behind it to keep weight and cost sensible. The cover measures 117 x 107 x 4mm with the installation frame at 117 x 107 x 32.7mm, rated for -40°C to 60°C operation. - [AVTRON 2 x 30W IP PA Mini Wall Amplifier - AP-N9E30W](https://connixtech.co.nz/product/avtron-2-x-30w-ip-pa-mini-wall-amplifier-ap-n9e30w/): The AP-N9E30W is the larger of the AVTRON mini wall amplifiers, doubling output to 2 x 30W and adding local facilities that matter in a real installation. An analogue microphone input with its own volume control allows announcements to be made at the zone itself, independent of the network — useful in a reception, a workshop office or a school staff room. A relay output and a 24V DC supply output drive local hardware such as strobes or override devices. Audio delay is held under 30ms, noticeably tighter than typical network audio, which keeps adjacent zones in step when they can be heard from the same position. Signal-to-noise is 90dB or better across 20Hz-22kHz, decoding ADPCM, MP3, MP2, PCM, WMA and WAV at 8-320kbps. The full-metal black chassis measures 35 x 150 x 132mm at under 0.7kg, wall-mounted or on a table, running from 24V DC. - [Hikvision Single Module Surface Mount Bracket - DS-KD-ACW1](https://connixtech.co.nz/product/hikvision-single-module-surface-mount-bracket-ds-kd-acw1/): The DS-KD-ACW1 fixes a single-module door station to the face of a wall, which is the practical choice on solid brick, concrete and heritage frontages where cutting a flush aperture is expensive or not permitted. The kit includes the module frame, front panel and the necessary accessories, so nothing else needs ordering to complete the installation. Aviation aluminium construction keeps the bracket light at 220g while resisting the corrosion that affects steel brackets at exposed entrances. The cover measures 117 x 107 x 4mm with the installation frame at 117 x 107 x 32.7mm, rated -40°C to 55°C at 10% to 95% humidity. Pair it with a rain shield where the entrance has no overhead cover. - [Hikvision Three Module Flush Mount Bracket - DS-KD-ACF3-PLASTIC](https://connixtech.co.nz/product/hikvision-three-module-flush-mount-bracket-ds-kd-acf3-plastic/): The DS-KD-ACF3/Plastic is the three-position flush bracket, for stations combining the main camera module with two others — commonly a keypad and a display, or a keypad and a nametag module. It is the widest flush bracket in the range at 337.8mm, which makes wall selection a real consideration: the aperture needs a clear run of masonry with no stud, pipe or cable in the way. The kit includes the plastic gang box, aluminium cover, screws and cabling. Blank modules fill any position not yet in use, keeping the station sealed to IP65. The cover measures 337.8 x 124 x 11.5mm over a 320.8 x 107 x 45mm gang box, weighs 420g, and is rated -40°C to 55°C. - [AVTRON 15W IP PA PoE Mini Wall Amplifier - AP-N9E15W](https://connixtech.co.nz/product/avtron-15w-ip-pa-poe-mini-wall-amplifier-ap-n9e15w/): The AP-N9E15W puts amplification at the speaker rather than in a rack. Power over Ethernet means one cable delivers both audio and power, so a small zone can be added to an IP PA system wherever there is a network drop — no local mains, no speaker cable back to a plant room. An ARM and DSP processor handles decoding across ADPCM, MP3, MP2, PCM, WMA and WAV at 8kHz to 44.1kHz, holding delay under 100ms so announcements stay in step with adjacent zones. Signal-to-noise is 90dB or better across 20Hz-22kHz. Two 15W outputs drive speakers directly, with an additional line output for feeding an external amplifier where a zone later grows. It runs over LAN or WAN through standard gateways and routers on TCP, UDP, IGMP, ICMP, ARP and DNS. The full-metal black chassis is 30 x 100 x 70mm at under 0.7kg, wall-mounted or sitting on a desk, powered from PoE or 12-24V DC. - [AVTRON 60W IP Network Amplifier - AP-N9A60](https://connixtech.co.nz/product/avtron-60w-ip-network-amplifier-ap-n9a60/): The AP-N9A60 brings a zone onto an IP public address system using the network already in the building. Configuration runs from the system server, so adding an area is a software task rather than a cabling project. Once on the network the amplifier can carry scheduled MP3 programmes, pre-recorded messages and live announcements, and multiple zones can be addressed simultaneously or individually from one console. At 60W it suits smaller areas — an office floor, a reception, a single classroom block — where the speaker load does not justify a larger amplifier but the zone still needs to sit inside the wider system. It integrates with existing LAN and WAN infrastructure rather than requiring a dedicated audio network, which is the practical reason IP PA displaces analogue distribution on multi-building sites. - [Hikvision Two Module Flush Mount Bracket - DS-KD-ACF2-PLASTIC](https://connixtech.co.nz/product/hikvision-two-module-flush-mount-bracket-ds-kd-acf2-plastic/): The DS-KD-ACF2/Plastic recesses a two-module door station — typically the main camera module plus a keypad, display or nametag module — into the wall face. Everything for the installation is in the box: plastic gang box, aluminium cover, screws and cabling, so first fix and second fix can be separated cleanly. Sizing the bracket is a decision to make up front, since changing it later means re-cutting masonry. Where a second module may be added in future, specify this bracket now and fit a blank module in the spare position. The cover measures 236 x 124 x 14.5mm over a 219 x 107 x 45mm gang box, weighs 290g, and is rated -40°C to 55°C. - [AVTRON 500W IP Network Amplifier - AP-N9A500](https://connixtech.co.nz/product/avtron-500w-ip-network-amplifier-ap-n9a500/): The AP-N9A500 is the top of AVTRON's IP network amplifier range, for the zones that carry the most speakers — large industrial floors, transport facilities, stadium concourses and wide outdoor areas. Like the smaller models it decodes network audio on board and is configured entirely from the system server, so a site can standardise on one product family and vary only the rating per zone. Paging, scheduled programme and pre-recorded messaging all travel over the existing LAN or WAN, with zones addressed individually, in groups, or site-wide. Because the management layer is shared with every other amplifier on the system, commissioning and operator training carry over unchanged as a site scales up. - [AVTRON 350W IP Network Amplifier - AP-N9A350](https://connixtech.co.nz/product/avtron-350w-ip-network-amplifier-ap-n9a350/): The AP-N9A350 handles the larger zones on an IP public address system — full warehouse floors, sports halls, sizeable outdoor areas — while remaining a network endpoint managed from the same console as every smaller zone. On-board decoding means the amplifier receives audio directly from the network, and configuration is done through the system server rather than at the unit. Live paging, background music and scheduled announcements all route across the existing LAN or WAN, so extending coverage to a new building follows the network rather than requiring new audio distribution cabling. Zones can be addressed individually or grouped, giving operators control over who hears what without physical re-patching. - [Hikvision Single Module Flush Mount Bracket - DS-KD-ACF1-PLASTIC](https://connixtech.co.nz/product/hikvision-single-module-flush-mount-bracket-ds-kd-acf1-plastic/): The DS-KD-ACF1/Plastic recesses a single-module door station into the wall so only the aluminium cover sits proud — the cleaner look, and the harder one to lever off. The kit is complete with the plastic gang box, cover, screws and cabling, so the box can go in during first fix and the electronics land on it later. Plastic for the gang box is deliberate: it is the part buried in masonry where an aluminium box would corrode, while the visible cover is aluminium. The cover measures 117 x 107 x 11.5mm over a 117 x 107 x 45mm gang box, weighs 195g, and is rated -40°C to 55°C at 10% to 95% humidity. - [AVTRON 240W IP Network Amplifier - AP-N9A240](https://connixtech.co.nz/product/avtron-240w-ip-network-amplifier-ap-n9a240/): The AP-N9A240 doubles the output of the 120W model for zones carrying a heavier speaker load, while keeping the same IP behaviour and central management. Audio decoding is built in, so the amplifier connects straight to the network and appears in the system server alongside every other zone — no separate decoder to power, mount or fail. Live paging, scheduled programme and pre-recorded messages all arrive over the building's existing LAN or WAN, and zones can be addressed individually, in groups or all at once. It suits medium sites — a school block, a retail floor, a warehouse with an office wing — where the amplifier sits at the zone and the control stays in the server room. - [Hikvision 6-Port 2-Wire Distributor without Power - DS-KAD706Y-SP](https://connixtech.co.nz/product/hikvision-6-port-2-wire-distributor-without-power-ds-kad706y-sp/): The DS-KAD706Y-SP is the signal-only version of the six-port 2-Wire distributor: devices connect for communication but draw power locally rather than from the distributor. That is the right choice where the connected devices already have their own supplies, or where cable runs are long enough that voltage drop would make distributor-fed power unreliable. It also keeps the distributor's own thermal load down in a full DIN enclosure. Two cascade interfaces chain further units in the DS-KAD704Y, DS-KAD706Y and DS-KAD706Y-S series, so capacity grows by adding distributors. Eight interface indicators show per-port status at the rail for quick fault isolation, with an RJ-45 interface and a reset button. Power input is 24V DC, DIN rail mounted, rated -10°C to 55°C at 10% to 90% humidity. - [AVTRON 120W IP Network Amplifier - AP-N9A120](https://connixtech.co.nz/product/avtron-120w-ip-network-amplifier-ap-n9a120/): The AP-N9A120 is an audio distribution endpoint for IP-based public address, combining 120W of amplification with a built-in decoder so a zone needs no separate network audio receiver. Announcements, background music and scheduled messages all arrive over the existing LAN or WAN, which means a multi-building site can run one PA system across minimal additional cabling. Control is centralised: scheduling, volume adjustment and zone-specific broadcasts are all handled from the server room rather than at the amplifier, so day-to-day operation does not require access to plant rooms. It suits schools, offices, restaurants and fitness centres — environments with several distinct areas, changing schedules and no appetite for a dedicated AV technician. - [Hikvision 6-Port 2-Wire Distributor with Power - DS-KAD706Y-P](https://connixtech.co.nz/product/hikvision-6-port-2-wire-distributor-with-power-ds-kad706y-p/): The DS-KAD706Y-P is the hub of a 2-Wire intercom installation, feeding six devices with both signal and power over their two-core runs. Supplying power down the same pair is what keeps a 2-Wire retrofit simple — no local supply needed at each indoor station, and no second cable pulled to a device that already has one. Two cascade interfaces chain further distributors (DS-KAD704Y, DS-KAD706Y and DS-KAD706Y-S series), so a building scales by adding units rather than replacing the first one. Eight interface indicators give a per-port status read at the DIN rail, which turns fault-finding into a glance rather than a continuity test on every run. Power is 24V DC with consumption under 6W on channels 1-5 and under 16W on channel 6. An RJ-45 interface and a reset button are provided, rated -10°C to 55°C. - [AVTRON 60W IP Network Mixer Amplifier - AP-N8A60](https://connixtech.co.nz/product/avtron-60w-ip-network-mixer-amplifier-ap-n8a60/): The AP-N8A60 is the entry point of the AVTRON network mixer amplifier range, sized for a small site or a single wing — an office floor, a clinic, a compact retail space. Mixing and network audio are combined in one 1U box: three microphone inputs, two auxiliary and one line input feed the internal mixer, while the network side receives paged and scheduled audio from the IP PA system. A built-in audio controller means no separate network decoder in the rack. A 144 x 32 LCD reports status at the rack, and 0V alarm input and output tie the amplifier into fire or building management systems. Class D output keeps consumption under 75W for 60W of audio. Output is 100V line for distributed speakers, with signal-to-noise better than 90dB over 20Hz-16kHz. The full-metal black chassis is 44 x 483 x 408mm and under 7kg, rack or table mounted, running on 200-240V AC. - [Hikvision Villa Door Station Rain Shield - DS-KABV6133-RS](https://connixtech.co.nz/product/hikvision-villa-door-station-rain-shield-ds-kabv6133-rs/): The DS-KABV6133-RS is the rain shield matched to KABV6133 series villa door stations, sized to that housing rather than to the modular KD8 range. Villa stations are typically mounted at a gate or front door with no overhead shelter, which is exactly where a shield earns its place — keeping run-off away from the camera and call button, and shading the lens against low sun. SGCC hot-dip galvanised steel construction resists corrosion in permanent outdoor exposure, and the shield is for surface mounting. It measures 189 x 109 x 45.47mm and is rated -40°C to 60°C at 10% to 95% non-condensing humidity. - [AVTRON 500W IP Network Mixer Amplifier - AP-N8A500](https://connixtech.co.nz/product/avtron-500w-ip-network-mixer-amplifier-ap-n8a500/): The AP-N8A500 is the top of the AP-N8A range, for sites where a single zone or amplifier group draws serious power — stadium concourses, large distribution centres, industrial sites with dozens of horn speakers. It keeps the same 1U format and control layout as the smaller models in the family, so a site can standardise on one amplifier design and vary only the rating per zone. Three microphone, two auxiliary and one line input feed the mixer; the network controller is built in. 0V alarm input and output allow integration with fire detection and building management, while the 144 x 32 LCD provides local status. Consumption stays under 700W for 500W of Class D output. 100V line output drives distributed speakers at better than 90dB signal-to-noise across 20Hz-16kHz. The chassis is 44 x 483 x 408mm at under 16kg on 200-240V or 110V AC. - [Hikvision Three Module Door Station Rain Shield - DS-KABD8003-RS3](https://connixtech.co.nz/product/hikvision-three-module-door-station-rain-shield-ds-kabd8003-rs3/): The DS-KABD8003-RS3 is the widest rain shield in the range at 325.8mm, covering a three-module surface-mounted door station. It is surface mount only — there is no flush equivalent, because a recessed station sits behind the wall face and does not need one. SECC electro-galvanised steel stands up to permanent outdoor exposure. Installation follows the same pattern as the smaller shields: levelling sticker as a drilling template, four expansion bolts, module connecting cables threaded through the frame, then the cover fixed with the supplied hex wrench. It measures 325.8 x 116.4 x 58mm at 702.3g, rated -40°C to 60°C at 10% to 95% humidity. Compatible with DS-KD8003-IME1 and DS-KD8003-IME2 stations. - [AVTRON 350W IP Network Mixer Amplifier - AP-N8A350](https://connixtech.co.nz/product/avtron-350w-ip-network-mixer-amplifier-ap-n8a350/): The AP-N8A350 carries the speaker loads that defeat smaller amplifiers: long warehouse runs, multi-level car parks, large manufacturing floors where horn and cabinet speakers are spread across a wide area. Despite 350W of Class D output it stays in a 1U chassis at under 14kg, which keeps rack space and structural loading reasonable in a comms room that also holds switching and recording gear. Local mixing runs from three microphone, two auxiliary and one line input, with the network audio controller built in. 0V alarm input and output tie into fire and building systems, and the 144 x 32 LCD shows status at the rack. Output is 100V line with signal-to-noise of 90dB or better across 20Hz-16kHz, drawing under 500W from a 200-240V or 110V AC supply with fuse protection. - [AVTRON 240W IP Network Mixer Amplifier - AP-N8A240](https://connixtech.co.nz/product/avtron-240w-ip-network-mixer-amplifier-ap-n8a240/): The AP-N8A240 doubles the output of the 120W model while keeping the same 1U footprint, which is the practical constraint in most comms cabinets. It covers larger warehouses, full school blocks and hospital floors running substantial speaker loads. Local sources connect through three microphone, two auxiliary and one line input; network audio arrives via the built-in controller, so paging and scheduled programme need no additional rack hardware. 0V alarm input and output link the amplifier to fire and building management systems, and the 144 x 32 LCD reports state without a laptop. Class D operation keeps draw under 280W at full 240W output. 100V line output feeds distributed speakers with signal-to-noise better than 90dB over 20Hz-16kHz. The full-metal chassis is 44 x 483 x 408mm at under 14kg on 200-240V or 110V AC. - [Hikvision Two Module Door Station Rain Shield - DS-KABD8003-RS2](https://connixtech.co.nz/product/hikvision-two-module-door-station-rain-shield-ds-kabd8003-rs2/): The DS-KABD8003-RS2 covers a two-module surface-mounted door station, keeping rain off both the camera module and the keypad, display or nametag module beside it. Protecting the second module matters as much as the first: keypads and nametag buttons are the parts that fail from water ingress, and they sit exposed on the same frontage. SECC electro-galvanised steel construction is specified for permanent outdoor use. Installation uses a supplied levelling sticker as a drilling template and four expansion bolts, with module connecting cables threaded through the frame before the cover is fixed with the supplied hex wrench. It measures 224 x 116.4 x 58mm at 500g, rated -40°C to 60°C at 10% to 95% humidity. - [AVTRON 120W IP Network Mixer Amplifier - AP-N8A120](https://connixtech.co.nz/product/avtron-120w-ip-network-mixer-amplifier-ap-n8a120/): The AP-N8A120 suits the multi-room building — a warehouse with an office block, a school wing, a medium hospital department — where several zones share one amplifier but the site still needs network paging. Three microphone inputs, two auxiliary and one line input handle local sources, while the built-in audio controller receives paging and scheduled programme from the IP PA system without a separate decoder. The 144 x 32 LCD gives a status read at the rack, and 0V alarm input and output integrate the amplifier with fire panels and building systems. Class D efficiency holds consumption under 150W for 120W of output. Speaker output is 100V line, signal-to-noise better than 90dB across 20Hz-16kHz. The 1U full-metal chassis measures 44 x 483 x 408mm at under 12kg, running from 200-240V or 110V AC with fuse protection. - [Hikvision Single Module Door Station Rain Shield - DS-KABD8003-RS1](https://connixtech.co.nz/product/hikvision-single-module-door-station-rain-shield-ds-kabd8003-rs1/): The DS-KABD8003-RS1 shelters a single-module surface-mounted door station from rain running down the wall above it — the water path that gets into a station regardless of its IP rating over time. It also shades the camera lens, which reduces the flare that makes a caller's face unreadable when low sun hits the station directly. SECC electro-galvanised steel construction handles permanent outdoor exposure. The shield mounts on four expansion bolts with a supplied levelling sticker as a drilling template, and the door station fits into the frame behind it. It measures 122 x 116.4 x 58mm at 298.9g and is rated -40°C to 60°C at 10% to 95% humidity. Compatible with DS-KD8003-IME1 and DS-KD8003-IME2 modular door stations. - [Hikvision Secure Door Control Module - DS-K2M061](https://connixtech.co.nz/product/hikvision-secure-door-control-module-ds-k2m061/): The DS-K2M061 exists to close the most obvious attack on a door: an access terminal mounted outside the building holds the lock relay, so cutting it open and shorting two terminals opens the door. This module moves that relay inside the secure area. The terminal outside only sends a command over RS-485; the actual lock switching happens on the protected side of the door, where an attacker cannot reach it. It also gathers the door contact, exit button and tamper signals and reports them back to the terminal, with a tamper alarm of its own and RS-485 indicators showing communication status. A Wiegand interface connects a card reader for entry or exit, and fire interface linkage releases the door on a fire signal — a code requirement on most egress doors. Interfaces cover one lock control, one exit button, one door contact, two alarm inputs, one alarm output, RS-485 and Wiegand, with a 4-channel DIP switch for ID configuration. It runs on 12V DC at 0.5A, measures 48 x 115 x 26mm, and is rated -40°C to 70°C. - [AVTRON 10 Zone Intelligent PA and Paging Controller - AP-MC210](https://connixtech.co.nz/product/avtron-10-zone-intelligent-pa-and-paging-controller-ap-mc210/): The AP-MC210 replaces the stack of separate boxes a conventional analogue PA rack needs. Weekly scheduling, paging, speaker selection, MP3 playback, fire alarm integration and voice evacuation all live in one controller. Programming runs to 512 steps across five time modes — four normal programmes plus a dedicated emergency mode — with up to 200 steps in a single day. That covers a school bell timetable, shift changes and seasonal variations without external scheduling hardware. The 192 x 64 LCD and light-touch buttons give direct control of ten individual zones, all zones, music or paging selection and MP3 transport, with a backup switch for fallback operation. Five integrated 100V input channels are provided, along with EMC input and output on 0V short circuit industrial standard for fire panel integration. Communication uses RS485, RS232 and RS422 with two RJ45 ports for remote microphones. - [AVTRON Lithium Rechargeable Battery for Wireless Microphones - AP-LRB](https://connixtech.co.nz/product/avtron-lithium-rechargeable-battery-for-wireless-microphones-ap-lrb/): The AP-LRB is the dedicated lithium-ion cell for AVTRON wireless conference microphones. Eight hours of speech time covers a full day of sessions, and 30 hours of standby means units left switched on between meetings are still usable. Charging runs at under 700mA from a DC15V supply, with discharge held under 500mA for stable output as the cell drains. Keeping the pack matched to the microphone avoids the voltage sag that causes dropouts with generic replacements. At 250g and 30 x 135 x 65mm it adds little weight to a handheld or delegate unit, and slots into the AP-BC259 multi-bay charger for fleet turnaround. - [Hikvision Pro Fingerprint Access Terminal with Intercom - DS-K1T502DBFWX-CE1](https://connixtech.co.nz/product/hikvision-pro-fingerprint-access-terminal-with-intercom-ds-k1t502dbfwx-ce1/): The DS-K1T502DBFWX-CE1 does the job of two devices: an access control terminal and a door intercom in one housing, which halves the hardware on an entrance that needs both. Authentication covers capacitive fingerprint, M1 and DESFire cards, PIN, QR code and Bluetooth from a phone — so a site can issue whichever credential suits each user group without adding readers. Zinc alloy construction with IP65 and IK09 ratings is built for an outdoor, public-facing entrance where a plastic terminal would be vandalised or weather-damaged. Intercom runs over standard SIP against Brekeke, miniSipServer, FreePBX, Asterisk, 3CX, ELASTIX and PBXware, so the terminal joins an existing phone system rather than requiring Hikvision indoor stations. The call button reaches a management centre, an indoor station or a phone. A Wiegand interface connects it to an existing access controller (Hik 26-bit and 34-bit), and RS-485 handles an external card reader or elevator calling. A 2MP camera covers 110° horizontally. Power is 802.3at PoE or 12-24V DC at 24W or less, rated -40°C to 65°C. - [AVTRON 30W All-in-One IP Horn Speaker - AP-IP603POE](https://connixtech.co.nz/product/avtron-30w-all-in-one-ip-horn-speaker-ap-ip603poe/): The AP-IP603POE puts IP streaming, decoding, amplification and the driver itself into a single outdoor housing, switchable between 15W and 30W output to match the coverage a position needs. It runs on 802.3af or 802.3at PoE, or on 12V DC — and the DC input doubles as a battery backup connection, so the horn keeps working through a mains failure. On a site where the PA system is also the emergency notification path, that is the difference between a working system and a silent one. Audio is MP3 and MP2 at CD-level 16-bit quality, 8-48kHz sampling and 8-512kbps, with group broadcast handled over IGMP. Sensitivity is 92dB at 1W/1M across 100Hz-18kHz ±3dB with 0.1% distortion and 85dB signal-to-noise. The white ABS housing is 285mm diameter x 205mm at 2.4kg, supplied with a stainless U-bracket and rated -30°C to 55°C. - [AVTRON 7-Inch Touch Screen IP Paging Station - AP-IP600TM](https://connixtech.co.nz/product/avtron-7-inch-touch-screen-ip-paging-station-ap-ip600tm/): The AP-IP600TM is the operator position for an AVTRON IP public address system, replacing a bank of zone buttons with a 7-inch touch screen that shows the site as it actually is. Full duplex two-way communication between remote microphones means a paging call can become a conversation — a reception desk and a loading dock can talk without either party releasing a key, which a conventional simplex paging station cannot do. Connections cover an RJ45 network port, line input and output, a microphone input and a USB input for playing stored announcements or background material. Audio runs MP3 and MP2 at 8-48kHz sampling across 20Hz-16kHz, with distortion at or under 0.3% and signal-to-noise better than 70dB. The unit measures 250 x 163 x 42mm at 2.2kg, drawing 10W or less from a 12V DC supply. - [HiLook Wired LCD Keypad - HA-ALARM-KP](https://connixtech.co.nz/product/hilook-wired-lcd-keypad-ha-alarm-kp/): The HA-ALARM-KP#AU is a wired LCD Keypad from HiLook's wired intrusion range. It provides a 10.2 to 14.4 VDC supply. Features include LCD screen display and supports one-touch arm（Arming without password）. Measures 150mm × 115mm × 28mm and operates from - 10 °C to + 55 °C (14 °F to 131 °F). - [HiLook Internal Universal Bracket - HA-ALARM-BKT](https://connixtech.co.nz/product/hilook-internal-universal-bracket-ha-alarm-bkt/): The HA-ALARM-BKT is an internal Universal Bracket from HiLook's wired intrusion range. Features include 0-90° vertical; ±40° horizontal; Wall/Ceiling mount. Measures 29.3mm × 53.2mm × 35.5mm. - [Hikvision AX PRO (433MHz) - DS-PWA96-M-WB](https://connixtech.co.nz/product/hikvision-ax-pro-433mhz-ds-pwa96-m-wb/): The DS-PWA96-M-WB is an AX PRO (433MHz) from Hikvision's AX PRO wireless alarm range. It provides up to 12 hours at normal temperature battery life. Features include TCP/IP, Wi-Fi, and 3/4G network and new generation wireless protocol: Tri-X/Cam-X. Measures 170.0 mm (6.7") × 170.0 (6.7") mm × 38.6 mm (1.5") and operates from -10 °C to +55 °C (please make sure the adapter is connected). - [Hikvision AX PRO Kit (433MHz) - DS-PWA96-Kit-WB](https://connixtech.co.nz/product/hikvision-ax-pro-kit-433mhz-ds-pwa96-kit-wb/): The DS-PWA96-Kit-WB is an AX PRO Kit (433MHz) from Hikvision's AX PRO wireless alarm range. It provides up to 12 hours at normal temperature battery life. 96-zone wireless security alarm starter kit with wireless control panel, keypad, Camera PIR, sounders, sensor and accessories. Supports reliable wireless intrusion detection, app control and easy installation for residential and small commercial security applications. - [Hikvision CR123A Battery Pack of 2 - DS-PT031](https://connixtech.co.nz/product/hikvision-cr123a-battery-pack-of-2-ds-pt031/): The DS-PT031 is a CR123A Battery from Hikvision's wired intrusion range. Features include stable voltage with 1600mAh capacity and used coorperatively with door contact, outdoor siren, indoor detector, etc. Measures 16.8mm × 34.3mm and operates from -30℃ - 60℃. - [Hikvision Tag - DS-PT-M1](https://connixtech.co.nz/product/hikvision-tag-ds-pt-m1/): The DS-PT-M1 is a tag from Hikvision's wired intrusion range. Features include small and solid structure and convenient to carry with. Measures 41 × 32 × 3.5mm and operates from -10 °C to 50 °C. - [Hikvision Wireless Internal Sounder - DS-PS1-I-WB](https://connixtech.co.nz/product/hikvision-wireless-internal-sounder-ds-ps1-i-wb/): The DS-PS1-I-WB(B) is a wireless Internal Sounder from Hikvision's AX PRO wireless alarm range. It provides up to 3 years (standby time) battery life. Features include 433 MHz two-way wireless communication and configurable arming/disarming prompt sound and LED indicator. Measures 88 × 88 × 32 mm. - [Hikvision Blue Wireless External Sounder - DS-PS1-E-WB](https://connixtech.co.nz/product/hikvision-blue-wireless-external-sounder-ds-ps1-e-wb/): The DS-PS1-E-WB is a wireless External Sounder from Hikvision's AX PRO wireless alarm range. It provides up to 3 years (standby time) battery life. Features include 433 MHz two-way wireless communication and 3 years battery life span. Measures 190 × 200 × 47. 3 mm. - [Hikvision Wireless Repeater - DS-PR1-WB](https://connixtech.co.nz/product/hikvision-wireless-repeater-ds-pr1-wb/): The DS-PR1-WB is a wireless Repeater from Hikvision's AX PRO wireless alarm range. It provides up to 24 hours at normal temperature battery life. Features include 433MHz two-way wireless communication and Two-way communication, stable and secure. Measures 150 mm × 150 mm × 25 mm and operates from ﹣10°C to +55°C. - [Hikvision 3G/4G Communication Module(AU) - DS-PM2-S](https://connixtech.co.nz/product/hikvision-3g-4g-communication-moduleau-ds-pm2-s/): The DS-PM2-S(AU) is a 3G/4G Communication Module(AU) from Hikvision's AX HYBRID PRO alarm range. Features include LTE-TDD: B40 and LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66. Measures 62.03 mm × 88.28 mm and operates from -10°C to +40°C. - [Hikvision Tri-X Wireless Receiver - DS-PM1-RT-HWB](https://connixtech.co.nz/product/hikvision-tri-x-wireless-receiver-ds-pm1-rt-hwb/): The DS-PM1-RT-HWB is a Tri-X Wireless Receiver from Hikvision's AX HYBRID PRO alarm range. It provides a 9 to 24 VDC supply. Features include 433MHz wireless receiver and wireless transmission distance up to 1300m. Measures 110 mm × 155 mm × 32 mm and operates from -10°C to 40°C. - [Hikvision Wired 4-way low current relay - DS-PM1-O4L-H](https://connixtech.co.nz/product/hikvision-wired-4-way-low-current-relay-ds-pm1-o4l-h/): The DS-PM1-O4L-H is a wired 4-way low current relay from Hikvision's AX HYBRID PRO alarm range. It provides an 11 to 24 VDC supply. Features include 4 on-board low current relays, supporting 6-30V and up to 5A current and 1 power output, maximum 500mA. Measures 110 mm × 155 mm × 32.5 mm and operates from -10°C to 40°C. - [Hikvision Wired 4-way power relay - DS-PM1-O4H-H](https://connixtech.co.nz/product/hikvision-wired-4-way-power-relay-ds-pm1-o4h-h/): The DS-PM1-O4H-H is a wired 4-way power relay from Hikvision's AX HYBRID PRO alarm range. It provides a 9 to 24 VDC supply. Features include supports 4 onboard power relays，each relay can handle current of up to 16A and powered by Speed-X technology，supporting expander cascading with 1 uplink Speed-X port and 1 downlink Speed-X port. Measures 110 mm × 155 mm × 32.5 mm and operates from -10°C to 40°C. - [Hikvision Relay module - DS-PM1-O1L-WB](https://connixtech.co.nz/product/hikvision-relay-module-ds-pm1-o1l-wb/): The DS-PM1-O1L-WB is a relay module from Hikvision's AX PRO wireless alarm range. It provides a DC 7V to 24V supply. Features include 433 MHz two-way wireless communication and AES-128 encryption. Measures 38 mm × 25 mm × 18 mm and operates from -10°C to 55°C. - [Hikvision Wall Switch - DS-PM1-O1H-WB](https://connixtech.co.nz/product/hikvision-wall-switch-ds-pm1-o1h-wb/): The DS-PM1-O1H-WB is a wall Switch from Hikvision's AX PRO wireless alarm range. It provides an AC 100v – 240v, 50/60 HZ supply. Features include 433MHz two-way wireless communication and AES-128 encryption. Measures 38 × 25 × 18mm and operates from ﹣10℃~+55℃. - [Hikvision Wired Input Expander（Cascade） - DS-PM1-I8O2-H](https://connixtech.co.nz/product/hikvision-wired-input-expander-cascade-ds-pm1-i8o2-h/): The DS-PM1-I8O2-H is a wired Input Expander（Cascade） from Hikvision's AX HYBRID PRO alarm range. It provides an 11 to 24 VDC supply. Features include 8 on-board wired zones and support 3EOL connection(Alarm: 1KΩ; Tamper: 1KΩ; Fault: 2.2KΩ). Measures 110 mm × 155 mm × 32 mm and operates from -10°C to 40°C. - [Hikvision Multi IO transmitter - DS-PM1-I16O2-WB](https://connixtech.co.nz/product/hikvision-multi-io-transmitter-ds-pm1-i16o2-wb/): The DS-PM1-I16O2-WB is a multi IO transmitter from Hikvision's AX PRO wireless alarm range. It provides up to 36 hours battery life. Features include 433MHz two-way wireless communication and LED display, show the real status of device. Measures 261 × 199 × 86.4mm and operates from –10 ~ 40°C. - [Hikvision Single Input Transmitter - DS-PM1-I1-WB](https://connixtech.co.nz/product/hikvision-single-input-transmitter-ds-pm1-i1-wb/): The DS-PM1-I1-WB is a single Input Transmitter from Hikvision's AX PRO wireless alarm range. It provides up to 5 years (standby time) battery life. Features include small size design, which can be put into wired detector easily and 433MHz two-way wireless communication. Measures 102 × 41 × 20mm and operates from –10℃ ~ 55℃. - [Hikvision Wireless Keyfob - DS-PKF1-WB](https://connixtech.co.nz/product/hikvision-wireless-keyfob-ds-pkf1-wb/): The DS-PKF1-WB(B) is a wireless Keyfob from Hikvision's AX PRO wireless alarm range. It provides up to 3 years (standby time) battery life. Features include keyfob lock and unlock function and fully remote configurable through App. - [Hikvision Wireless LCD Keypad - DS-PK1-LT-WB](https://connixtech.co.nz/product/hikvision-wireless-lcd-keypad-ds-pk1-lt-wb/): The DS-PK1-LT-WB is a wireless LCD Keypad from Hikvision's AX PRO wireless alarm range. It provides up to 2 years (standby time) battery life. Features include 433MHz two-way wireless communication and LCD screen and LED to indicate system status. Measures 174.63 × 109.62 × 25.25mm and operates from -10 °C to +55 °C. - [Hikvision Wired LCD Keypad - DS-PK1-LRT-HWB](https://connixtech.co.nz/product/hikvision-wired-lcd-keypad-ds-pk1-lrt-hwb/): The DS-PK1-LRT-HWB is a wired LCD Keypad from Hikvision's AX HYBRID PRO alarm range. It provides a 10.2 to 14.4 VDC supply. Features include LCD screen display and supports one-touch arm（Arming without password）. Measures 150mm × 115mm × 28mm and operates from - 10 °C to + 55 °C (14 °F to 131 °F). - [Hikvision Wireless LED Keypad - DS-PK1-E-WB](https://connixtech.co.nz/product/hikvision-wireless-led-keypad-ds-pk1-e-wb/): The DS-PK1-E-WB is a wireless LED Keypad from Hikvision's AX PRO wireless alarm range. It provides up to 2 years (standby time) battery life. Features include 433 MHz two-way wireless communication and AES-128 encryption. Measures 140 (5.50") × 86 (3.38") × 22 (0.87") mm and operates from -10 °C to +55 °C (-4 °F to +122 °F). - [Hikvision AX HYBRID PRO - DS-PHA64-LP](https://connixtech.co.nz/product/hikvision-ax-hybrid-pro-ds-pha64-lp/): The DS-PHA64-LP(B) is an AX HYBRID PRO from Hikvision's AX HYBRID PRO alarm range. It provides up to 36hrs battery life. Features include supports arming/disarming via keypad, keyfob, mobile client, iVMS-4200, SMS and tag and pushes alarm notification via messages and Hik-Connect. Measures 261 mm × 199 mm × 86.4 mm and operates from -10°C to 40°C. - [Hikvision Wireless Triple Signal Detector - DS-PDTT15AM-LM-WB](https://connixtech.co.nz/product/hikvision-wireless-triple-signal-detector-ds-pdtt15am-lm-wb/): The DS-PDTT15AM-LM-WB is a wireless Triple Signal Detector from Hikvision's AX PRO wireless alarm range. It provides 15 m detection at 90° @ 180° adjustable and Two-Way RF Wireless. Features include 90°@180° adjustable coverage and IP65 weather resistance for outdoor application. Measures 75 mm × 202 mm × 73 mm and operates from -25°C to 60°C (-13°F to 140°F). - [Hikvision Wireless Temperature Detector - DS-PDTPH-E-WB](https://connixtech.co.nz/product/hikvision-wireless-temperature-detector-ds-pdtph-e-wb/): The DS-PDTPH-E-WB is a wireless Temperature Detector from Hikvision's AX PRO wireless alarm range. It provides a -10 °C to 55 °C（standalone） -35 °C to 99 °C（with included probe） detection range and Two-Way RF Wireless. Features include big screen display, modular design for multiple use applications and fully remote configurable through App. Measures 62.6mm × 62.6mm × 18mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless Photoelectric Smoke Detector - DS-PDSMK-S-WB](https://connixtech.co.nz/product/hikvision-wireless-photoelectric-smoke-detector-ds-pdsmk-s-wb/): The DS-PDSMK-S-WB is a wireless Photoelectric Smoke Detector from Hikvision's AX PRO wireless alarm range. It provides Two-Way RF Wireless and up to 10 years (standby time) battery life. Features include high quality chamber with photoelectric sensor and 10 years battery life. Measures φ102 × 35mm and operates from -10 °C to 60 °C (14 °F to 140°F). - [Hikvision Wireless PIR-Glass Break Detector - DS-PDPG12P-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-pir-glass-break-detector-ds-pdpg12p-eg2-wb/): The DS-PDPG12P-EG2-WB is a wireless PIR-Glass Break Detector from Hikvision's AX PRO wireless alarm range. It provides 12m detection at 85.9° and Two-Way RF Wireless. Features include up to 30KG pet immunity and fully remote configurable through App. Measures 65.5mm × 103mm × 48.5mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wired PIR-Glass Break Detector - DS-PDPG12P-EG2](https://connixtech.co.nz/product/hikvision-wired-pir-glass-break-detector-ds-pdpg12p-eg2/): The DS-PDPG12P-EG2 is a wired PIR-Glass Break Detector from Hikvision's wired intrusion range. It provides 12m detection at 85.9° and a 9 to 16 VDC supply. Features include up to 30KG pet immunity and selectable EOL resistors. Measures 65.5mm × 103mm × 48.5mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless PIR-Camera Detector - DS-PDPC12PF-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-pir-camera-detector-ds-pdpc12pf-eg2-wb/): The DS-PDPC12PF-EG2-WB(B) is a wireless PIR-Camera Detector from Hikvision's AX PRO wireless alarm range. It provides 12m detection at 90° and Two-Way RF Wireless. Features include up to 30KG pet immunity and SEC (Smart Environmental Control) - Advanced digital signal processing and 3D optics. Measures 72.2mm × 120.5mm × 56.7mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wired PIR-Camera Detector - DS-PDPC12P-EG2](https://connixtech.co.nz/product/hikvision-wired-pir-camera-detector-ds-pdpc12p-eg2/): The DS-PDPC12P-EG2 is a wired PIR-Camera Detector from Hikvision's AX HYBRID PRO alarm range. It provides 12m detection at 85.9° and a 9 to 16 VDC supply. Features include up to 30KG pet immunity and SEC (Smart Environmental Control) - Advanced digital signal processing and 3D optics. Measures 73mm × 130.5mm × 56.7mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wired PIR Detector - DS-PDP18-EG2](https://connixtech.co.nz/product/hikvision-wired-pir-detector-ds-pdp18-eg2/): The DS-PDP18-EG2(B) is a wired PIR Detector from Hikvision's wired intrusion range. It provides 18m detection at 85.9° and a 9 to 16 VDC supply. Features include wide voltage - 9 to 16 V wide voltage adaptation with polarity reverse connection protection. Measures 65.4mm × 86.8mm × 45.5mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless PIR - DS-PDP15P-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-pir-ds-pdp15p-eg2-wb/): The DS-PDP15P-EG2-WB(B) is a PIR from Hikvision's AX PRO wireless alarm range. It provides 15m detection at 90° and Two-Way RF Wireless. Features include up to 30KG pet immunity and SEC (Smart Environmental Control) - Advanced digital signal processing and 3D optics. Measures 65.5mm × 103mm × 48.5mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless External Magnetic Contact - DS-PDMCX-E-WB](https://connixtech.co.nz/product/hikvision-wireless-external-magnetic-contact-ds-pdmcx-e-wb/): The DS-PDMCX-E-WB is a wireless External Magnetic Contact from Hikvision's AX PRO wireless alarm range. It provides Two-Way RF Wireless and up to 5 years (standby time) battery life. Features include IP66 protective level, UV stable and fully remote configurable through App. Measures Sensor: 40.5mm × 146mm × 40.9mm Magnetic Stick: 30.5mm × 146mm × 40.9mm and operates from -20 °C to 60 °C (-4 °F to 140 °F). - [Hikvision Wireless Slim Magnet Detector - DS-PDMCS-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-slim-magnet-detector-ds-pdmcs-eg2-wb/): The DS-PDMCS-EG2-WB(B) is a wireless Slim Magnet Detector from Hikvision's AX PRO wireless alarm range. Features include slim design for an unobtrusive (unnoticeable) installation and fully remote configurable through App. - [Hikvision Wireless Magnet Shock Detector - DS-PDMCK-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-magnet-shock-detector-ds-pdmck-eg2-wb/): The DS-PDMCK-EG2-WB(B) is a wireless Magnet Shock Detector from Hikvision's AX PRO wireless alarm range. It provides Two-Way RF Wireless and up to 3 years (standby time) battery life. Features include magnetic contact combined with shock and tilt detection and 2 wired inputs extension. Measures 24 × 104 × 24.4 mm 13 × 34.4 × 11.4 mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Magnetic Contact - DS-PDMC-EG2-WB](https://connixtech.co.nz/product/hikvision-magnetic-contact-ds-pdmc-eg2-wb/): The DS-PDMC-EG2-WB(B) is a magnetic Contact from Hikvision's AX PRO wireless alarm range. It provides Two-Way RF Wireless and up to 5 years (standby time) battery life. Features include slim design for an unobtrusive (unnoticeable) installation and fully remote configurable through App. Measures 24mm × 104mm × 24.4mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless Portable Emergency Button - DS-PDEBP1-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-portable-emergency-button-ds-pdebp1-eg2-wb/): The DS-PDEBP1-EG2-WB is a wireless Portable Emergency Button from Hikvision's AX PRO wireless alarm range. It provides Two-Way RF Wireless and up to 3 years (standby time) battery life. Features include accidental press protection and fully remote configurable through App. Measures φ38 × 12mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless Emergency Button - DS-PDEB1-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-emergency-button-ds-pdeb1-eg2-wb/): The DS-PDEB1-EG2-WB(B) is a wireless Emergency Button from Hikvision's AX PRO wireless alarm range. It provides Two-Way RF Wireless and up to 3 years (standby time) battery life. Features include effective emergency button and fully remote configurable through App. Measures 63.8mm × 63.8mm × 18.4mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless Dual-Tech Detector - DS-PDD12P-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-dual-tech-detector-ds-pdd12p-eg2-wb/): The DS-PDD12P-EG2-WB is a wireless Dual-Tech Detector from Hikvision's AX PRO wireless alarm range. It provides 12m detection at 85.9° and Two-Way RF Wireless. Features include 3D optics including creep-zone protection, full coverage without dead angle and 24G microwave to prevent wall penetration. Measures 65.5mm × 103mm × 48.5mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wired Dual-tech Detector - DS-PDD12P-EG2](https://connixtech.co.nz/product/hikvision-wired-dual-tech-detector-ds-pdd12p-eg2/): The DS-PDD12P-EG2 is a wired Dual-tech Detector from Hikvision's wired intrusion range. It provides 12m detection at 85.9° and a 9 to 16 VDC supply. Features include up to 30kg pey immunity and automatic sensitivity. Measures 65.7 mm (2.59 ") × 103.8 mm (4.09 ") × 45.5 mm (1. 79 ") and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision RF Camera Module - DS-PDCM15PF-IR](https://connixtech.co.nz/product/hikvision-rf-camera-module-ds-pdcm15pf-ir/): The DS-PDCM15PF-IR is an RF Camera Module from Hikvision's AX PRO wireless alarm range. It provides 1 12-Bit Data Interface and a 3 VDC supply. Features include 1/2.7" Progressive Scan CMOS and 2.0 mm fixed lens. Measures 74.1mm × 72.35mm × 53mm and operates from -25 °C to 60 °C (-13 °F to 140 °F). - [Hikvision Wired Dual-Tech Ceiling Detector - DS-PDCL12DT-EG2](https://connixtech.co.nz/product/hikvision-wired-dual-tech-ceiling-detector-ds-pdcl12dt-eg2/): The DS-PDCL12DT-EG2 is a wired Dual-Tech Ceiling Detector from Hikvision's wired intrusion range. It provides 12m detection at 360° and a 9 to 16 VDC supply. Features include digital quad pyro sensor + 24GHz microwave and automatic sensitivity. Measures φ120 mm × 33.2 mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless PIR Ceiling Detector - DS-PDCL12-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-pir-ceiling-detector-ds-pdcl12-eg2-wb/): The DS-PDCL12-EG2-WB is a wireless PIR Ceiling Detector from Hikvision's AX PRO wireless alarm range. It provides 12m detection at 360° and Two-Way RF Wireless. Features include SEC (Smart Environmental Control) - Advanced digital signal processing and 3D optics and fully remote configurable through App. Measures φ101.2 mm × 32.9 mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wireless Dual-Tech AM Curtain Detector - DS-PDC10DM-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-dual-tech-am-curtain-detector-ds-pdc10dm-eg2-wb/): The DS-PDC10DM-EG2-WB is a wireless Dual-Tech AM Curtain Detector from Hikvision's AX PRO wireless alarm range. It provides Wall mount: 10m Ceiling mount: 5m detection at 5° and Two-Way RF Wireless. Features include slim design for window frame installation and IP65 weather resistance for outdoor application. Measures 29.2 mm × 134.4 mm × 39.5 mm and operates from -25°C to 60°C (-13°F to 140°F). - [Hikvision Wireless Glass Break Detector - DS-PDBG8-EG2-WB](https://connixtech.co.nz/product/hikvision-wireless-glass-break-detector-ds-pdbg8-eg2-wb/): The DS-PDBG8-EG2-WB is a wireless Glass Break Detector from Hikvision's AX PRO wireless alarm range. It provides 8m detection at 120° and Two-Way RF Wireless. Features include high quality Omni-directional microphone sensor and fully remote configurable through App. Measures 38.8mm × 107.0mm × 24.5mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Wired Glass Break Detector - DS-PDBG8-EG2](https://connixtech.co.nz/product/hikvision-wired-glass-break-detector-ds-pdbg8-eg2/): The DS-PDBG8-EG2 is a wired Glass Break Detector from Hikvision's wired intrusion range. It provides 8m detection at 120° and a 9 to 16 VDC supply. Features include high quality Omni-directional microphone sensor and up to 8m/120° detection coverage. Measures 38.8 mm × 107 mm × 22.5 mm and operates from -10°C to 55°C (14°F to 131°F). - [Hikvision Surface mounted magnetic contact of plastic casing - DS-PD1-MC-WS](https://connixtech.co.nz/product/hikvision-surface-mounted-magnetic-contact-of-plastic-casing-ds-pd1-mc-ws/): The DS-PD1-MC-WS is a surface mounted magnetic contact of plastic casing from Hikvision's wired intrusion range. Features include ABS shell and designed for the surface mounting on wood door. Measures 63.5mm × 12.5mm × 15.7mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Magnetic contact for rolling door - DS-PD1-MC-RS](https://connixtech.co.nz/product/hikvision-magnetic-contact-for-rolling-door-ds-pd1-mc-rs/): The DS-PD1-MC-RS is a magnetic contact for rolling door from Hikvision's wired intrusion range. Features include metal shell and designed for rolling door. Measures 108mm × 40mm × 8mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [Hikvision Li-battery - DS-PA-Battery](https://connixtech.co.nz/product/hikvision-li-battery-ds-pa-battery/): The DS-PA-Battery is a Li-battery from Hikvision's wired intrusion range. Features include compatible with AX Hub panel or Plastic shell AX Hybrid as a backup power supply and keeps the AXHub running for 12 Hours. Measures 58.9mm × 67.9mm × 7.85mm. - [TD-E3110-IC/PE/WF](https://connixtech.co.nz/product/td-e3110-ic-pe-wf/): 2MP Wi-Fi Video Doorbell with Access Control & Smart Detection The TVT CA44 TD-E3110-IC/PE/WF 2MP Video Doorbell is an intelligent IP video doorbell designed to provide clear entrance monitoring, visitor communication and convenient access control. With a 2MP Full HD camera, wide field of view, 2.4G Wi-Fi connectivity and two-way audio with noise suppression and echo cancellation, the CA44 provides reliable communication between visitors and indoor stations or mobile apps. - [No Touch Exit Button CX-EX04TL](https://connixtech.co.nz/product/no-touch-exit-button-cx-ex04tl/): CX-EX04TL Touchless Exit Button Touchless Infrared Exit Button – Surface Mount The Connix CX-EX04TL Touchless Exit Button is a surface-mounted, infrared exit switch designed for hygienic and convenient hands-free door and gate activation. Simply place your hand within the detection range to trigger the exit signal without physically touching the button. Featuring NO/NC/COM relay output, illuminated operation and a robust zinc-alloy construction, the CX-EX04TL is suitable for access control, automatic doors, gates and other exit automation applications. - [Automatic road barrier operator - Icarus QK-I5060B](https://connixtech.co.nz/product/automatic-road-barrier-operator-icarus-qk-i5060b/): QK-I5060B Automatic Road Barrier – ICARUS Heavy-Duty Automatic Boom Barrier for Vehicle Access Control The Quiko ICARUS QK-I5060B Automatic Road Barrier is a reliable 24V DC barrier operator designed for controlling vehicle access in commercial, industrial, residential, and car park applications. With support for boom arms up to 6.25 metres, the ICARUS provides fast, smooth and dependable vehicle access control. Its robust construction, IP55 protection and continuous-duty operation make it suitable for high-traffic entrances where reliable performance is essential. - [Hikvision HikCentral Lite V1.4.0](https://connixtech.co.nz/product/hikvision-hikcentral-professional-v3-1-1/): HikCentral Lite is a Hikvision’s security management software that helps overcome key security challenges on a single platform. Tailored for small and medium-sized enterprises, HikCentral Lite offers robust protection and peace of mind for your business. With advanced video and access control features, it ensures premium security across various scenarios. - [TP-Link 16-Port Gigabit Desktop/Rackmount Switch - TL-SG1016D](https://connixtech.co.nz/product/tp-link-16-port-gigabit-desktop-rackmount-switch-tl-sg1016d/): 16-Port Gigabit Unmanaged Switch The CUDY GS1016C is a reliable 16-port Gigabit unmanaged switch designed to provide fast and stable network connectivity for CCTV, security systems, offices and small-to-medium business networks. With 16 × 10/100/1000Mbps Gigabit RJ45 ports, the GS1016C delivers high-speed wired networking with simple plug-and-play installation and no configuration - [16 Port Gigabit Unmanaged Switch - GS1016C](https://connixtech.co.nz/product/16-port-gigabit-unmanaged-switch-gs1016c/): 16-Port Gigabit Unmanaged Switch The CUDY GS1016C is a reliable 16-port Gigabit unmanaged switch designed to provide fast and stable network connectivity for CCTV, security systems, offices and small-to-medium business networks. With 16 × 10/100/1000Mbps Gigabit RJ45 ports, the GS1016C delivers high-speed wired networking with simple plug-and-play installation and no configuration - [16 Port Fast Ethernet Unmanaged POE Switch - NS-0318P-130](https://connixtech.co.nz/product/16-port-fast-ethernet-unmanaged-poe-switch-ns-0318p-130/): The HiLook NS-0318P-130 is a 16-port unmanaged PoE switch designed for IP CCTV, security and networking applications. It provides 16 × 10/100Mbps PoE ports, plus Gigabit RJ45 and SFP uplink connectivity. With a 130W PoE budget and up to 250m transmission distance on Ports 9–16 when Extend Mode is enabled, it is well suited for larger CCTV installations. - [24 Port Fast Ethernet Unmanaged POE Switch - NS-0326P-230](https://connixtech.co.nz/product/24-port-fast-ethernet-unmanaged-poe-switch-ns-0326p-230/): The HiLook NS-0326P-230(B) is a 24-port unmanaged PoE switch designed for IP CCTV, security and networking applications. It provides 24 × 10/100Mbps PoE ports, plus Gigabit RJ45 and SFP uplink connectivity. With a 230W PoE budget and up to 250m transmission distance on Ports 17–24 when Extend Mode is enabled, it is well suited for larger CCTV installations. - [DYNAMIX Cat6A UTP Keystone RJ45 Slimline Jack - FP-C6AUTP-03](https://connixtech.co.nz/product/dynamix-cat6a-utp-keystone-rj45-slimline-jack-fp-c6autp-03/): The DYNAMIX FP-C6-008V2 is a slimline Cat6 UTP RJ45 keystone jack designed for high-density installations. Its compact 180-degree profile fits side-by-side in 24- and 48-port patch panels and multi-gang faceplates without crowding. 50-micron gold plating over nickel ensures corrosion resistance and stable Gigabit/10GbE performance, while clearly labelled dual T568A/T568B IDC blocks reduce termination errors. Accepts 23–24 AWG cable; for rapid termination use the DYNAMIX CT-RAPV2 tool. Supplied in black. - [Hikvision IP Video Intercom Kit - DS-KIS603-P](https://connixtech.co.nz/product/hikvision-ip-video-intercom-kit-ds-kis603-p/): The DS-KIS703Y-P is a complete one-to-one intercom in a single box — indoor station, door station and power supply — so a house or single tenancy needs nothing else specified. Running over two-core cable is the point: an existing analogue intercom's wiring can be reused, which turns a rewire into a swap. That is usually the difference between a job going ahead and being deferred. The door station carries a 2MP camera with 140° x 85° coverage, WDR and IR to 3m, a single call button, IP65 rating and two-lock control with 12V 500mA output to drive an electric lock directly. The 7-inch 1024 x 600 touch screen indoor station handles calls, door release and live view, with Hik-Connect app control for answering and unlocking remotely, a setup wizard for commissioning, and voice messages when nobody answers. Supplied for surface mounting with the power supply included. - [AVTRON 30W PoE IP Ceiling Speaker - IP-NC30](https://connixtech.co.nz/product/avtron-30w-poe-ip-ceiling-speaker-ip-nc30/): The IP-NC30 is a 30W ceiling speaker that joins a network PA system directly, taking power, audio and control down a single 802.3at PoE cable. It handles background music, live announcements, pre-recorded messages and — paired with an IP voice alarm controller — voice alarm duty, so one speaker covers everyday and emergency use. Multiple PoE speakers can be grouped and zoned, delivering different programmes to different zones at the same time from the same infrastructure. Paging priority ensures announcements take precedence over music without operator action. Volume is adjustable across the network rather than at the unit, and an optional DC12V standby input keeps the speaker running if PoE is lost. It suits offices, schools, commercial buildings and smart audio installations. - [AVTRON 6 Zone 60W Mixer Amplifier with Bluetooth, USB and FM - AP-ZP60](https://connixtech.co.nz/product/avtron-6-zone-60w-mixer-amplifier-with-bluetooth-usb-and-fm-ap-zp60/): The AP-ZP60 is the smallest amplifier in AVTRON's six-zone range, and the point is the zone count rather than the wattage — a small clinic, dental practice, boutique or office suite gets six independently controlled areas from a single 2U unit. Each zone has its own volume control, so reception can run background music while a consulting room stays silent and a corridor takes a page. Speaker outputs cover 100V and 70V line plus 4-16 ohm, which handles both new distributed wiring and existing low-impedance speakers. The built-in media player covers MP3 files, USB drives, FM radio and Bluetooth, removing the need for a separate source device on the shelf. Inputs include a Mic 1 with VOX highest priority that ducks music automatically when someone speaks, four balanced XLR mic/line inputs with +48V phantom power, and RCA line inputs. The chassis rack-mounts in standard 19-inch furniture. - [AVTRON 6 Zone 500W Mixer Amplifier with Bluetooth, USB and FM - AP-ZP500](https://connixtech.co.nz/product/avtron-6-zone-500w-mixer-amplifier-with-bluetooth-usb-and-fm-ap-zp500/): The AP-ZP500 tops AVTRON's six-zone mixer amplifier range at 500W, built for large commercial and public address installations where the whole site runs from one amplifier position. Six zone outputs run at 100V line, with an additional single zone output that accepts 100V, 70V or 4-16 ohm — useful for a foyer, hall or outdoor area whose speakers do not match the rest of the building. Each zone has independent volume control for precise level management across areas. The Mic 1 input arrives on a 6.3mm jack with VOX highest priority, so live announcements interrupt programme audio automatically. Further inputs cover balanced XLR mic/line with phantom power and RCA line. A built-in media player handles MP3 playback, USB, FM radio and Bluetooth. The chassis is 2U for 19-inch rack mounting. - [AVTRON 6 Zone 350W Mixer Amplifier with Bluetooth, USB and FM - AP-ZP350](https://connixtech.co.nz/product/avtron-6-zone-350w-mixer-amplifier-with-bluetooth-usb-and-fm-ap-zp350/): The AP-ZP350 is the second-largest of AVTRON's six-zone mixer amplifiers, for sites where the speaker load per zone is substantial — large retail floors, function centres, multi-building schools. Six independently controlled zones run from one 2U chassis, with 100V, 70V and 4-16 ohm speaker outputs for flexibility across new and existing installations. An EMC input with secondary priority provides an emergency override path, so a fire or evacuation feed takes the system regardless of what is playing. Mic 1 carries VOX highest priority for routine announcements, alongside four balanced XLR mic/line inputs with +48V phantom power and RCA line inputs. The built-in player covers MP3, USB, FM radio and Bluetooth. The chassis is 2U for standard 19-inch racks. - [AVTRON 6 Zone 240W Mixer Amplifier with Bluetooth, USB and FM - AP-ZP240](https://connixtech.co.nz/product/avtron-6-zone-240w-mixer-amplifier-with-bluetooth-usb-and-fm-ap-zp240/): The AP-ZP240 carries four times the power of the 60W model while keeping the same six-zone layout, which suits mid-sized sites — a supermarket, a hotel ground floor, a manufacturing office block — where zone count and output both matter. Every zone gets independent volume control, and speaker outputs span 100V line, 70V line and 4-16 ohm so the amplifier fits whatever speaker infrastructure a building already has. The built-in media player handles MP3, USB, FM radio and Bluetooth. On the input side, Mic 1 carries VOX highest priority so announcements automatically take precedence over programme audio, backed by four balanced XLR mic/line inputs with +48V phantom power and RCA line inputs. The 2U chassis mounts in a standard 19-inch rack. - [AVTRON 6 Zone 120W Mixer Amplifier with Bluetooth, USB and FM - AP-ZP120](https://connixtech.co.nz/product/avtron-6-zone-120w-mixer-amplifier-with-bluetooth-usb-and-fm-ap-zp120/): The AP-ZP120 is a complete small-system PA in one 2U box: six independently controlled zones, 120W of output and a media player, so a cafe, gym, showroom or small school can run announcements and background music without a rack of separate components. Each zone has its own volume control, meaning music can play in one area while another sits quiet and a third takes a page. Speaker outputs cover 100V and 70V line as well as 4-16 ohm, so it works with new distributed installations and older low-impedance speaker runs alike. Source options run from the built-in player — MP3, USB, FM radio and Bluetooth — through to microphone and line inputs. Mic 1 carries VOX highest priority, so an announcement automatically ducks the music without anyone touching a control. Balanced XLR inputs 2-4 include a mic/line switch and +48V phantom power for professional microphones, alongside RCA line inputs. The 2U chassis rack-mounts in standard 19-inch furniture. - [AVTRON Emergency Announcement Panel - AP-Z221](https://connixtech.co.nz/product/avtron-emergency-announcement-panel-ap-z221/): The AP-Z221 holds a site's emergency message and plays it the moment it is needed — triggered by an external alarm signal or by pressing the front panel button. Messages are recorded at the panel through the microphone input (600 ohm, 5mV) or the line input, using the play and record controls with a dedicated record level adjustment. Recording on site rather than sourcing pre-made audio means the message names the actual building and exits. Output is over 200mV of siren or recorded message for an amplifier or other downstream equipment, running 100Hz-3.4kHz ±3dB — the band that carries best through a noisy, panicked space. Signal-to-noise is better than 70dB with distortion under 0.1% at 1kHz. The 2U full-metal chassis measures 89 x 483 x 366mm at under 7kg, running from 200-240V AC with fuse protection and 24V DC at under 15W. - [AVTRON 10 Zone Speaker Selector - AP-Z220](https://connixtech.co.nz/product/avtron-10-zone-speaker-selector-ap-z220/): The AP-Z220 routes one programme source to ten zones, with the useful addition of dual A and B amplifier inputs that switch automatically — background music from one amplifier, emergency audio from another. That arrangement means the emergency amplifier is not carrying music duty and wearing out, and the changeover happens without an operator deciding which input to select during an incident. All ten zones accept priority contact input on a 0V trigger, with two alarm output ports providing 0V trigger signals to other systems. Inputs take 100V or 70V audio at 150W per channel with a total capacity of 1.5kW. Control is by ten zone push buttons and a power switch. The 2U full-metal chassis runs from 200-240V AC with fuse protection and 24V DC at under 17W. - [AVTRON 2 x 5 Zone Speaker Selector - AP-Z219](https://connixtech.co.nz/product/avtron-2-x-5-zone-speaker-selector-ap-z219/): The AP-Z219 gives a mid-sized site two independent five-zone systems in one rack unit — or one ten-zone system, depending on how it is configured. Two amplifier inputs feed the two groups, so background music can run in five zones while a second amplifier drives announcements or a different programme in the other five. Where a site does not need that split, the unit runs as a straightforward ten zone selector from a single source. That flexibility matters in buildings whose use changes — a venue that operates as one space some days and as separate rooms on others. Inputs take two programme channels at 100V or 70V, handling 150W per channel with a total capacity of 1.5kW. The 2U full-metal chassis measures 89 x 483 x 366mm at under 8kg, running from 200-240V AC with fuse protection at under 20W. - [AVTRON 16 Zone Speaker Selector with 4x4 Matrix - AP-Z218](https://connixtech.co.nz/product/avtron-16-zone-speaker-selector-with-4x4-matrix-ap-z218/): The AP-Z218 does more than route one amplifier to many zones — its 4x4 matrix lets four separate programme sources reach four groups of four zones independently, so different parts of a building can carry different audio at the same time. A fifth priority channel overrides all of it when an emergency or paging signal arrives, with priority contact inputs on all 16 zones activated by a 0V trigger. That combination suits venues where a retail floor, a restaurant, an office wing and a back-of-house area each want their own programme but must all be reachable by one announcement. Inputs take 100V or 70V audio, handling 375W per channel with a total capacity of 1.5kW. An alarm output provides a 0V trigger signal to downstream equipment. Control is by 16 zone push buttons and a power switch. The 2U full-metal chassis runs from 200-240V AC with fuse protection at under 20W. - [AVTRON 10 Channel Speaker Monitor Panel - AP-Z217](https://connixtech.co.nz/product/avtron-10-channel-speaker-monitor-panel-ap-z217/): The AP-Z217 is the ten-channel monitor panel in AVTRON's control room range, for systems where 16 channels is more than the site needs. A 10-position selector switch picks the channel and a 500mW full-range monitor speaker reproduces it, with five-level LED metering giving a visual reference for level. Taking 100V or 70V audio from the speaker lines means the panel reports what is actually reaching the speakers. Controls are deliberately minimal — monitor volume, channel select and power — so an operator checks a zone in seconds without navigating a menu. Response covers 100Hz-15kHz with 80dB signal-to-noise. The 2U full-metal chassis measures 89 x 483 x 366mm at under 8kg, running from 200-240V AC with fuse protection and drawing under 15W. - [AVTRON 16 Zone Keypad Paging Station - AP-Z214](https://connixtech.co.nz/product/avtron-16-zone-keypad-paging-station-ap-z214/): The AP-Z214 is the operator station for AVTRON's standard analogue paging systems. Sixteen zone keys are available directly, and paging across up to 16 AP-Z215 units reaches 160 zones on larger sites. Four priority levels govern what takes the system when several sources compete, and a built-in chime announces a page before the message starts. Both a high-sensitivity gooseneck microphone and an RCA line input are provided, so recorded material or a music source can be paged out as easily as a live voice. Mute attenuation of 0-30dB ducks the secondary line when the microphone or primary line is active. Microphone input is 600 ohm 5mV on XLR, line input 10k ohm 775mV on RCA, and line output over 775mV at 0dB. Response runs 100Hz-15kHz on microphone and 20Hz-15kHz on line ±3dB, with distortion under 0.01% at 1kHz. The full-metal desktop unit weighs under 2.5kg on 200-240V AC at under 8W. - [AVTRON UHF Wireless Conference Delegate Unit - AP-WC257](https://connixtech.co.nz/product/avtron-uhf-wireless-conference-delegate-unit-ap-wc257/): The AP-WC257 is the delegate position in an AVTRON UHF wireless conference system. Volume, unit ID and channel are all set at the seat, so a room can be reconfigured between sessions without returning every unit to a technician. The LCD shows channel, ID and remaining battery, giving delegates and operators the same view of unit status. A standby mode conserves the battery through long breaks without a full power cycle. The gooseneck microphone detaches for transport, and the unit joins the same UHF system as the AP-WC256 chairman units and AP-W260 main unit. - [AVTRON UHF Wireless Conference Chairman Unit - AP-WC256](https://connixtech.co.nz/product/avtron-uhf-wireless-conference-chairman-unit-ap-wc256/): The AP-WC256 is the chairman position in an AVTRON UHF wireless conference system. Up to 16 chairman units can run on one master system, which suits panel formats where several people need the authority to take the floor. The LCD reports channel, unit ID and battery level at the seat, so an operator can spot a unit about to run flat before it interrupts a session rather than after. The gooseneck microphone detaches for transport and storage. Transmission runs FM across 740-790MHz with a service range of 100 metres and signal-to-noise better than 100dB. The unit operates from 4.5V and weighs under 1kg at 56 x 168 x 125mm. - [AVTRON Conference System Power Adaptor - AP-WC128](https://connixtech.co.nz/product/avtron-conference-system-power-adaptor-ap-wc128/): The AP-WC128 is the mains adaptor for AVTRON wireless conference systems. It powers the main unit and handles charging duty for wireless chairman and delegate units, so a room can be brought back to full charge between sessions on the supplied cord. Input accepts 220V or 115V at 50-60Hz, making it suitable for New Zealand installations and for systems that travel. Output is a regulated DC18V at 600mA. At 0.75kg and 60 x 100 x 75mm it packs with the system for mobile and rental use, and is the correct replacement part where an original adaptor has been lost or damaged. - [AVTRON 6W EN54-24 Fire Resistant Wall Cabinet Speaker - AP-W56FS 6](https://connixtech.co.nz/product/avtron-6w-en54-24-fire-resistant-wall-cabinet-speaker-ap-w56fs-6/): The AP-W56FS is the wall-mounted member of AVTRON's EN54 fire resistant range, for voice evacuation in buildings where ceiling installation is not possible — exposed structures, plant rooms, corridors with solid soffits. Certification to EN54-24 and BS5839 is what allows it into an evacuation circuit; a general purpose cabinet speaker cannot be substituted regardless of how similar it looks. The full metal cabinet with metal back cover both meets the fire requirement and acts as a proper sealed enclosure, which is why it reproduces background music better than an open-backed speaker of the same size. The 6-inch paper woofer covers 120Hz-10kHz at 92dB sensitivity with maximum output to 102dB. Taps are 6W, 3W and 1.5W on 70V or 100V line. The 160 x 160 x 60mm cabinet weighs under 1.5kg in red or grey white RAL 7035. - [AVTRON 15W IP66 Outdoor Horn Speaker - AP-W47-15](https://connixtech.co.nz/product/avtron-15w-ip66-outdoor-horn-speaker-ap-w47-15/): The AP-W47-15 is the lower-powered version of the AP-W47 horn, for positions where 30W would be more level than the area can comfortably take — a small yard, a covered entry, a walkway close to neighbouring properties. Taps at 15W and 7.5W on a 100V or 70V line give further adjustment, so an installer can dial coverage down without leaving the horn shouting at nearby listeners. The IP66 waterproof rating and rugged ABS enclosure handle continuous outdoor exposure, and the stainless steel mounting bracket ships with the speaker for quick installation. It suits the same environments as the larger model — schools, offices, hotels and airports — wherever the coverage area calls for a smaller horn. - [AVTRON 30W IP66 Outdoor Horn Speaker - AP-W47](https://connixtech.co.nz/product/avtron-30w-ip66-outdoor-horn-speaker-ap-w47/): The AP-W47 is a voice-projection horn for outdoor public address, aimed at long throw and speech clarity rather than musical range. Selectable 30W and 15W taps on a 100V or 70V line let one model cover both a large open area and a smaller courtyard without over-driving the nearer position. The IP66 rating and ABS enclosure with stainless steel bracket handle sustained weather exposure, and connection is made through a speaker cable tail so there is no exposed terminal block to corrode. The white finish blends against light building frontages, and the supplied stainless bracket makes installation quick. It suits schools, offices, hotels and airports needing dependable outdoor announcements. - [AVTRON Waterproof Wall Mount PA Speaker - AP-W465](https://connixtech.co.nz/product/avtron-waterproof-wall-mount-pa-speaker-ap-w465/): The AP-W465 is a compact waterproof wall speaker for commercial PA systems, sized for spaces where a full-size cabinet would dominate the wall. A 4-inch full-range paper driver handles both voice announcements and background music with crisp reproduction, rated at 6W on a 100V line. The transformer-based line input supports 100V and 70V systems, so the speaker fits whichever distribution standard a building already uses rather than dictating one. The ABS enclosure and grille in white blend into modern interiors while resisting moisture, making it suitable for schools, offices, hotels and airports including areas exposed to damp. - [AVTRON 3 Inch 3W Waterproof Wall Speaker - AP-W45](https://connixtech.co.nz/product/avtron-3-inch-3w-waterproof-wall-speaker-ap-w45/): The AP-W45 is specified for the rooms most PA speakers cannot survive: shower rooms, spa areas, washrooms and clean rooms where humidity is constant rather than occasional. A fully sealed ABS enclosure and grille keep moisture out of the driver entirely — the failure mode that kills ordinary speakers in these spaces within a year or two. Rated 3W and 1.5W at 100V with support for both 100V and 70V line input, it is deliberately low-powered: these are small, hard-surfaced, reverberant rooms where more output would only reduce intelligibility. The compact format keeps it unobtrusive in tiled and glazed spaces while still carrying background music and announcements reliably. - [AVTRON 6.5 Inch 6W Wall Mount PA Speaker - AP-W43](https://connixtech.co.nz/product/avtron-6-5-inch-6w-wall-mount-pa-speaker-ap-w43/): The AP-W43 is an indoor wall speaker for background music and paging in commercial buildings, using a 6.5-inch full-range woofer for even coverage across a room. Wall mounting suits spaces with no accessible ceiling void — exposed services, concrete soffits, corridors in older buildings — where a ceiling speaker cannot be installed without major work. The transformer is rated 5W to 10W at 100V, with compatibility for both 100V and 70V line systems, so it drops into existing distributed installations. A screw hanging hole makes installation quick, and the ABS enclosure with steel grille is available in white or black. It suits schools, offices, hotels, airports and similar commercial spaces. - [AVTRON 6.5 Inch 40W Two-Way Outdoor Wall Speaker - AP-W36(-B-W)](https://connixtech.co.nz/product/avtron-6-5-inch-40w-two-way-outdoor-wall-speaker-ap-w36-b-w/): The AP-W36 is the largest of AVTRON's two-way outdoor wall speakers, using a 6.5-inch weatherproof woofer with a 1-inch silk dome tweeter for balanced full-range output. The larger driver moves more air at low frequencies, which is what lets outdoor background music retain body in an open space instead of thinning out a few metres from the speaker. Construction is built for weather: a rugged ABS enclosure with aluminium grille, stainless steel mounting bracket and a waterproof cable gland sealing the wiring entry, all rated IP66. Power is selectable at 40W, 20W, 10W and 5W with 8 ohm support, and black or white finishes are available. It suits outdoor commercial PA and music installations — hospitality terraces, retail frontages, sports facilities. - [AVTRON 5.25 Inch 30W Two-Way Outdoor Wall Speaker - AP-W35(-B-W)](https://connixtech.co.nz/product/avtron-5-25-inch-30w-two-way-outdoor-wall-speaker-ap-w35-b-w/): The AP-W35 is the mid-size outdoor wall speaker in AVTRON's range, pairing a weatherproof 5.25-inch woofer with a 1-inch silk dome tweeter. The silk dome matters for outdoor background music: it keeps high frequencies smooth at the level outdoor systems have to run, where a cheaper tweeter turns harsh. An IP66-rated ABS enclosure with aluminium grille and stainless steel bracket is specified for extreme conditions — coastal exposure, driving rain, constant sun — rather than for sheltered verandah duty. Four selectable power outputs at 30W, 15W, 7.5W and 3.8W plus 8 ohm compatibility allow flexible integration into 100V line systems or low-impedance runs. Black and white finishes are available for commercial background music and paging installations. - [AVTRON 4 Inch 20W Two-Way Outdoor Wall Speaker - AP-W34(-B-W)](https://connixtech.co.nz/product/avtron-4-inch-20w-two-way-outdoor-wall-speaker-ap-w34-b-w/): The AP-W34 is a compact outdoor wall speaker for background music and paging, where a horn would be too harsh and a ceiling speaker is not an option. Being a two-way design rather than a single full-range driver, it reproduces music with genuine top end — the difference between a courtyard that sounds pleasant and one that sounds like a tannoy. A weatherproof cable gland seals the connection at the speaker, which is where outdoor installations usually fail first. Four power taps at 20W, 10W, 5W and 2.5W, plus 8 ohm operation, allow careful level setting across a run of speakers. Black and white finishes are available so the speaker can either disappear against the building or be specified to match existing hardware. It suits outdoor dining areas, entries, courtyards and covered walkways. - [AVTRON UHF Wireless Conference System Main Unit - AP-W260](https://connixtech.co.nz/product/avtron-uhf-wireless-conference-system-main-unit-ap-w260/): The AP-W260 runs an AVTRON UHF wireless conference system without the cable runs a wired system needs. It addresses up to 256 units and powers 60 microphones, so a large chamber can be covered while leaving the floor clear. Two-way UHF transmission across 740-790MHz reaches 50 to 75 metres with adjustable +6.5dBm output, and high-level noise cancellation keeps the noise floor down in reverberant rooms. Signal-to-noise better than 105dB with distortion under 0.5% carries speech cleanly through the chain. A dedicated audio output feeds a recorder or streaming encoder, giving a clean archive of proceedings separate from the room feed. Balanced XLR and unbalanced jack outputs are provided, and the 2U full-metal chassis racks in 19-inch furniture or sits on a table, drawing under 8W. - [AVTRON 6W Override Volume Controller with Channel Selector - AP-VC6F](https://connixtech.co.nz/product/avtron-6w-override-volume-controller-with-channel-selector-ap-vc6f/): The AP-VC6F is the fully featured small-zone plate: source selection and emergency override in one outlet. Occupants pick from five programme channels and set their own level; a 24V DC relay overrides both when a priority announcement is broadcast. That combination suits hotel rooms, patient rooms and private offices — spaces where people expect control over what they hear, but which must still be reachable by a paging or evacuation call. Four volume levels plus full off cover normal use, and the built-in transformer handles the line feed. The UV-protected off-white ABS plate resists yellowing and mounts surface or in-wall. - [AVTRON 60W Volume Controller with 24V Emergency Override - AP-VC60F](https://connixtech.co.nz/product/avtron-60w-volume-controller-with-24v-emergency-override-ap-vc60f/): The AP-VC60F is the override variant of the 60W controller, for medium zones that must remain reachable by a paging or evacuation call. Under normal operation it attenuates in five resistive steps of 3dB to 33dB total and can be switched fully off. A 24V DC priority signal drops the relay, bypasses the attenuator and delivers the announcement at full level, then releases the zone back to its previous setting. The white UV-protected ABS plate measures 86 x 86mm with 60mm depth, mounts surface or in-wall, and weighs under 200g. - [AVTRON 60W Wall Volume Controller - AP-VC60](https://connixtech.co.nz/product/avtron-60w-wall-volume-controller-ap-vc60/): The AP-VC60 covers zones that carry more than a couple of speakers but fall short of a full 120W tap — a corridor run, a mid-sized workshop, a cafe with a distributed ceiling array. Five resistive steps drop 3dB each to 33dB total, with a full-off position, and the built-in transformer accepts 100V or 70V line input directly at the outlet. The UV-protected white ABS plate is 86 x 86mm with 60mm depth for surface or in-wall mounting, weighing under 100g. - [AVTRON 6W Volume Controller with Channel Selector - AP-VC6](https://connixtech.co.nz/product/avtron-6w-volume-controller-with-channel-selector-ap-vc6/): The AP-VC6 lets a small room choose its own programme source as well as its own level. Five selectable input channels are switched at the plate, so background music, a paging feed or a training channel can be picked without touching the rack. Four volume levels and a total power-off position keep operation simple for occupants who are not AV operators. The built-in transformer handles the line feed at the outlet. The UV-protected ABS plate keeps its off-white finish in sunlit rooms and mounts either on the surface or into a standard wall box. - [AVTRON 6W Volume Controller with 24V Emergency Override - AP-VC5F](https://connixtech.co.nz/product/avtron-6w-volume-controller-with-24v-emergency-override-ap-vc5f/): The AP-VC5F adds emergency override to the compact 6W controller, making it the right choice for small rooms that fall inside a paging or evacuation zone. In normal use it attenuates in five resistive steps of 3dB, to 33dB total, with a full-off position. When a 24V DC priority signal arrives the relay bypasses the attenuator and the room hears the announcement at full level. The 50mm-deep body suits shallow back boxes, and the UV-protected white ABS plate measures 86 x 86mm at under 200g. Line input is 100V or 70V. - [AVTRON 6W Wall Volume Controller - AP-VC5](https://connixtech.co.nz/product/avtron-6w-wall-volume-controller-ap-vc5/): The AP-VC5 is the entry point of the AVTRON wall controller range, sized for a room served by one or two ceiling speakers — an office, a consulting room, a small shop. Five resistive steps at 3dB each cover 33dB of attenuation with a full-off position, giving occupants real control without oversizing the hardware for the load. It accepts 100V or 70V line input directly. At 50mm the body is shallower than the higher-wattage models, which helps in thin partitions and shallow back boxes. The UV-protected white ABS plate measures 86 x 86mm and weighs under 100g. - [AVTRON 30W Volume Controller with 24V Emergency Override - AP-VC30F](https://connixtech.co.nz/product/avtron-30w-volume-controller-with-24v-emergency-override-ap-vc30f/): The AP-VC30F pairs mid-power zone control with the override behaviour a paging system needs. A 24V DC relay lifts the attenuator on a priority signal so the announcement reaches the room at full level no matter how the control was left. Day to day it works as a standard five-step controller for 100V or 70V line, dropping 3dB per step to 33dB total, with a full-off position for when a room needs quiet. Use it in classrooms, offices and back-of-house areas that sit inside a paging or evacuation zone. The white UV-protected ABS plate is 86 x 86mm, 60mm deep, surface or in-wall, under 200g. - [AVTRON 30W Wall Volume Controller - AP-VC30](https://connixtech.co.nz/product/avtron-30w-wall-volume-controller-ap-vc30/): The AP-VC30 handles the mid-sized zone: a classroom, a meeting room, a small retail area running a handful of ceiling speakers. At 30W it is matched to that load without paying for headroom the zone will never use. Five resistive steps at 3dB each give 33dB of total attenuation plus a full-off position, so occupants can set a working level or shut the zone down entirely. The built-in transformer takes 100V or 70V line directly. The 86 x 86mm UV-protected ABS plate sits surface-mounted or in a standard wall box at 60mm depth, weighing under 100g. - [AVTRON 120W Volume Controller with 24V Emergency Override - AP-VC120F](https://connixtech.co.nz/product/avtron-120w-volume-controller-with-24v-emergency-override-ap-vc120f/): The AP-VC120F is the override version of the 120W wall controller, and it exists for one reason: a volume knob turned down is a life-safety problem when an emergency announcement goes out. A 24V DC relay bypasses the attenuator on a priority signal, restoring the zone to full level for the duration of the call and releasing it afterwards. Under normal use it behaves as an ordinary five-step controller, 3dB per step to 33dB total, on 100V or 70V line. Specify this variant wherever a zone forms part of a paging or evacuation path. The UV-protected white ABS plate is 86 x 86mm with 60mm depth, surface or in-wall, at under 200g. - [AVTRON 120W Wall Volume Controller - AP-VC120](https://connixtech.co.nz/product/avtron-120w-wall-volume-controller-ap-vc120/): The AP-VC120 is the high-power attenuator in the AVTRON wall controller range, rated to 120W for zones carrying a substantial speaker load — a warehouse aisle, a large retail floor, a function room fed from a single tap. Five resistive steps drop 3dB each for 33dB of total attenuation, which is enough to take a zone from full level to near-silent while keeping the steps musically even. The built-in transformer accepts either 100V or 70V line inputs. The plate is UV-protected ABS in white, 86 x 86mm with a 60mm depth behind the wall, and mounts surface or flush. At under 100g it adds no meaningful load to a plasterboard box. - [AVTRON 6W Volume Controller with Channel Selector - AP-V6CF](https://connixtech.co.nz/product/avtron-6w-volume-controller-with-channel-selector-ap-v6cf/): The AP-V6CF gives a room control over what it hears, not just how loud. A five-position source selector lets the occupants choose between programme feeds — background music, a paging channel, a training feed — from the same plate that sets the level. Four volume steps plus a full-off position cover the useful range without the fine-grained fiddling that leaves a room set wrong. The built-in transformer handles the 100V line feed so no separate matching hardware is needed at the outlet. The UV-protected ABS plate holds its off-white finish rather than yellowing in sunlit rooms, and mounts either on the surface or into a standard wall box. - [AVTRON 30W SIP Wall Speaker - AP-SW30](https://connixtech.co.nz/product/avtron-30w-sip-wall-speaker-ap-sw30/): The AP-SW30 is the higher-output wall speaker in AVTRON's SIP range, doubling power over the PoE model for larger rooms, workshops and areas with more background noise to overcome. It runs from a DC supply rather than PoE, which suits positions where the cable run or power budget rules PoE out but a local supply is available. The two-way 5-inch woofer and 1.5-inch tweeter arrangement handles both speech and music, and the speaker registers to the phone system as a SIP endpoint for individual or group paging. Sensitivity is 92dB at 1W/1M across 100Hz-18kHz ±3dB with distortion at or under 1% and signal-to-noise of 85dB or better. The UV-protected ABS housing with metal grille measures 295 x 195 x 155mm at under 4kg on an aluminium U-bracket, rated -30°C to 55°C. - [AVTRON 15W SIP PoE Wall Speaker - AP-SW15P](https://connixtech.co.nz/product/avtron-15w-sip-poe-wall-speaker-ap-sw15p/): The AP-SW15P is the wall-mount SIP speaker, for spaces with no ceiling void — exposed-services offices, warehouses, corridors with solid soffits. A two-way design with a 5-inch woofer and 1.5-inch tweeter gives it the range to carry background music as well as speech, which single-driver units in this class struggle with. Amplifier and SIP decoder are built in, powered over 802.3af or 802.3at PoE with 12V DC as an alternative. The speaker registers to the phone system and can be dialled alone or paged as part of a group. Sensitivity is 92dB at 1W/1M across 100Hz-18kHz ±3dB, distortion at or under 1%, signal-to-noise 85dB or better. The UV-protected ABS body with black or white metal grille measures 295 x 195 x 155mm at under 4kg, rated -30°C to 55°C. - [AVTRON 30W SIP Horn Speaker - AP-SH30](https://connixtech.co.nz/product/avtron-30w-sip-horn-speaker-ap-sh30/): The AP-SH30 doubles the output of the 15W SIP horn for positions that need more reach or must cut through higher ambient noise — plant areas, large yards, industrial frontages. Running from a 24V DC supply rather than PoE, it suits runs where the distance or power budget puts PoE out of reach, while keeping the same SIP behaviour: registered as an endpoint, dialable individually or paged in groups. Sensitivity is 92dB at 1W/1M across 100Hz-18kHz ±3dB, distortion at or under 1%, signal-to-noise 85dB or better, handling MP3 and MP2 at 8-512kbps. The white aluminium outdoor housing measures 240mm diameter x 290mm at under 2.8kg, supplied with an aluminium U-bracket, rated -30°C to 55°C. - [AVTRON 15W SIP PoE Horn Speaker - AP-SH15P](https://connixtech.co.nz/product/avtron-15w-sip-poe-horn-speaker-ap-sh15p/): The AP-SH15P covers outdoor and industrial areas on a SIP system, taking a single PoE cable to a horn that registers to the phone system as its own endpoint. Compatibility with both 802.3af and 802.3at means it runs on the switches most sites already have, and speakers can be grouped or zoned so one horn or a whole yard responds to a page. The aluminium U-bracket mounts to a wall or pole and holds aim, which decides coverage for any horn. Sensitivity is 92dB at 1W/1M with response from 100Hz-18kHz ±3dB, distortion at or under 1% and signal-to-noise of 85dB or better on MP3 and MP2 at 8-512kbps. The white aluminium unit is 200mm diameter x 230mm at under 2.8kg, rated -30°C to 55°C. - [AVTRON 80W SIP Column Speaker - AP-SC80](https://connixtech.co.nz/product/avtron-80w-sip-column-speaker-ap-sc80/): The AP-SC80 is the 952mm column in AVTRON's SIP range, rated 80W RMS. The extra height narrows vertical dispersion, pushing more energy down the listening plane and less into canopies and hard ground. That directivity is what makes columns work in long reverberant outdoor spaces — station platforms, arcades, covered walkways — where an equivalent horn or cabinet would smear speech. The speaker registers to the phone system over SIP for direct-dial or group paging, taking PoE or a 24V DC supply with amplification built in. Audio covers MP3, WMA and WAV at 8-512kbps across 130Hz-16kHz ±3dB. The white aluminium enclosure is 952 x 227 x 125mm at 8.6kg, rated -30°C to 55°C. - [Hikvision 4 Channel Single HDD PoE NVR M Series - DS-7604NI-M2/4P](https://connixtech.co.nz/product/hikvision-4-channel-single-hdd-poe-nvr-m-series-ds-7604ni-m2-4p/): The Hikvision DS-7604NI-M2/4P 4-Channel PoE NVR is a high-performance M Series network video recorder designed for professional IP CCTV surveillance systems. Supporting up to 4 IP camera channels and HDMI output up to 8K resolution, it delivers high-definition monitoring and reliable video recording for residential, commercial and business security applications. With 4 built-in PoE ports, dual SATA hard drive interfaces and advanced H.265+ video compression, this NVR simplifies camera installation while helping optimise storage usage. It also supports remote monitoring through Hik-Connect, making it a practical solution for installers and security professionals. - [Hikvision 4 Channel 8MP 4K Cameras IP CCTV Kit - HK-H4286M-K1](https://connixtech.co.nz/product/hikvision-8-channel-8mp-4k-cameras-ip-cctv-kit-hk-h8286m-k1/): Hikvision 4channel 4K 8MP AcuSesne Smart IP CCTV Kit – HK-H4286M-K1 is a complete plug-and-play surveillance solution featuring 1 × DS-7604NI-M2-4P 4-ch 1U 4 PoE 8K NVR and 4 × DS-2CD2386G2-IU – 8 MP AcuSense Fixed Turret Network Cameras with 2.8mm lense, acusense technology, darkfighter and ip67. Designed for homes and small businesses, the system combines high-resolution 4K 8MP imaging, AI human and vehicle classification for smarter security protection. - [Hikvision 8 Channel 8MP 4K Cameras IP CCTV Kit - HK-H8486M-K1](https://connixtech.co.nz/product/hikvision-8-channel-8mp-4k-cameras-ip-cctv-kit-hk-h8486m-k1/): Hikvision 8channel 4K 8MP AcuSesne Smart IP CCTV Kit – HK-H8686M-K2 is a complete plug-and-play surveillance solution featuring 1 × DS-7608NI-M2-8P-M 8-ch 1U 8 PoE 8K NVR and 4 × DS-2CD2386G2-IU – 8 MP AcuSense Fixed Turret Network Cameras with 2.8mm lense, acusense technology, darkfighter and ip67. Designed for homes and small businesses, the system combines high-resolution 4K 8MP imaging, AI human and vehicle classification for smarter security protection. - [Hikvision 4K 8MP AcuSense Fixed Turret Network Camera - DS-2CD2386G2-IU](https://connixtech.co.nz/product/hikvision-4k-8mp-acusense-fixed-turret-network-camera-ds-2cd2386g2-iu/): The Hikvision DS-2CD2386G2-IU is a 8MP AcuSense fixed-turret IP camera that uses deep-learning AI to trigger alerts on people and vehicles only, cutting false alarms from wind, rain or animals. A 1/2.4″ sensor and choice of 2.8/4/6mm fixed lens deliver sharp resolution 3840×2160 images, with 30m Smart IR night vision, 120dB WDR for high-contrast scenes and a built-in microphone for audio. Rated IP67 with efficient H.265+ storage; PoE-powered. - [Hikvision 8 Channel 8MP 4K Cameras IP CCTV Kit - HK-H8686M-K2](https://connixtech.co.nz/product/hikvision-8-channel-8mp-4k-cameras-ip-cctv-kit-hk-h8686m-k2/): Hikvision 8channel 4K 8MP AcuSesne Smart IP CCTV Kit – HK-H8686M-K2 is a complete plug-and-play surveillance solution featuring 1 × DS-7608NI-M2-8P-M 8-ch 1U 8 PoE 8K NVR and 6 × DS-2CD2386G2-IU – 8 MP AcuSense Fixed Turret Network Cameras with 2.8mm lense, acusense technology, darkfighter and ip67. Designed for homes and small businesses, the system combines high-resolution 4K 8MP imaging, AI human and vehicle classification for smarter security protection. - [PD 40W 8" Ceiling Speaker Low Profile 100V](https://connixtech.co.nz/product/pd-40w-8-ceiling-speaker-low-profile-100v/) - [HiLook Pro 8 Channel 6MP Camera IP CCTV Kit - HL-8C461MP-K1](https://connixtech.co.nz/product/hilook-pro-8-channel-6mp-camera-ip-cctv-kit-hl-8c461mp-k1/): HiLook Pro Series 8channel 6MP All-In-One IP CCTV Kit – HL-8461M-K1 is a complete plug-and-play surveillance solution featuring 1 × NVR-108MH-K/4P 8-channel PoE NVR and 4 × IPC-T361H-MU 6MP AI IP Turret Cameras with 2.8mm lense, 30M IR, 120dB WDR, MIC and ip67. Designed for homes and small businesses, the system combines high-resolution 6MP imaging, AI human and vehicle classification for smarter security protection. - [Hilook 6MP Fixed Turret Network Camera - IPC-T262H-MU](https://connixtech.co.nz/product/hilook-6mp-fixed-turret-network-camera-ipc-t262h-mu/): Hilook 6MP AI Fixed Turret Network IP camera with human and vehicle detection, IR up to 30m, and built-in mic. - [BFT EasyAXS Wi-Fi Module with External Antenna Kit - B-EBA WIFI EVO](https://connixtech.co.nz/product/bft-easyaxs-wi-fi-module-with-external-antenna-kit-b-eba-wifi-evo/): Wifi connectivity module with external antenna. The use of EasyAXS Wifi connectivity allows a BFT automation (U-Link e U-Link2.0) to be easily linked to the TaHoma app? - [BFT EasyAXS Wi-Fi Connectivity Module B-EBA WIFI EVO](https://connixtech.co.nz/product/bft-easyaxs-wi-fi-connectivity-module-b-eba-wifi-evo/): Wifi connectivity module with built-in antenna. The use of EasyAXS Wifi connectivity allows a BFT automation (U-Link e U-Link2.0) to be easily linked to the TaHoma app? - [Sliding Gate Top Guide Roller 150mm Black CX-GR150B](https://connixtech.co.nz/product/sliding-gate-top-guide-roller-150mm-black-cx-gr150b/): 150mm sliding gate top guide roller assembly with 40mm black nylon rollers on a steel base-mount bracket — the low-profile option where the gate needs support close to the track. Quiet running and built for continuous outdoor duty. - [32Channels 4HDDs 16POE WizSense Network Video Recorder - DHI-NVR5432-16P-AI/ANZ](https://connixtech.co.nz/product/32channels-4hdds-16poe-wizsense-network-video-recorder-dhi-nvr5432-16p-ai-anz/): 16CH 1U 16PoE 2HDD WizSense Network Video Recorder delivers powerful AI-enabled video management with up to 256 Mbps bandwidth, support for cameras up to 16MP, and decoding of up to 16 × 1080p or 4 × 8MP channels. Featuring built-in 16-port PoE, advanced AI analytics, face detection and recognition, perimeter protection, SMD, people counting and EPTZ, it provides a reliable and intelligent surveillance solution for commercial and residential applications. - [ASSA ABLOY Trimec Z4 L&Z Bracket – 300lbs, Single Leaf - LT770300-901](https://connixtech.co.nz/product/assa-abloy-trimec-z4-lz-bracket-300lbs-single-leaf-lt770300-901/): The ASSA ABLOY Trimec Z4 L&Z Bracket (LT770300-901) is a mounting accessory designed to support the installation of compatible Z4 electromagnetic locks on doors where standard mounting is unsuitable. The L&Z bracket configuration provides flexible mounting options for different door and frame arrangements, helping installers achieve a secure and reliable access control installation. Manufactured from cast aluminium, the bracket features adjustable fixing positions to accommodate installation requirements. It is suitable for compatible single-leaf doors in commercial and security applications. - [ASSA ABLOY Z4 600lbs Electromagnetic Lock Double Leaf – LT770300-112](https://connixtech.co.nz/product/assa-abloy-z4-600lbs-electromagnetic-lock-double-leaf-lt770300-112/): The ASSA ABLOY Trimec Z4 LT770300-112 is double-leaf monitored electromagnetic lock designed to provide reliable, secure door locking for commercial access control applications. With a high holding force up to 580kg, fail-safe operation and dual monitoring capability, it is suitable for a range of aluminium, steel and timber door installations. The integrated Armature Position Status (APS) monitoring confirms that the electromagnet is powered and bonded to the armature plate, while Door Position Status (DPS) monitoring uses an integrated reed switch to monitor the door's position independently. Featuring selectable 12V DC or 24V DC operation, self-aligning armature plate design and instantaneous release technology, the Z4 is suitable for both new installations and retrofit projects. - [ASSA ABLOY Trimec Z4 600lbs Electromagnetic Lock – LT770300-012](https://connixtech.co.nz/product/assa-abloy-trimec-z4-600lbs-electromagnetic-lock-lt770300-012/): The ASSA ABLOY Trimec Z4 LT770300-012 is a monitored electromagnetic lock designed to provide reliable, secure door locking for commercial access control applications. With a high holding force, fail-safe operation and dual monitoring capability, it is suitable for a range of aluminium, steel and timber door installations. The integrated Armature Position Status (APS) monitoring confirms that the electromagnet is powered and bonded to the armature plate, while Door Position Status (DPS) monitoring uses an integrated reed switch to monitor the door's position independently. Featuring selectable 12V DC or 24V DC operation, self-aligning armature plate design and instantaneous release technology, the Z4 is suitable for both new installations and retrofit projects. - [50Watt Passive Ceiling Speaker - AV-WFC50WP](https://connixtech.co.nz/product/50watt-passive-ceiling-speaker-av-wfc50wp/): AV-WFC50WP Passive High Power 2-Way Slave Ceiling Speaker for AV-WFC50W This 2-way in-ceiling speaker combines a high-end Kevlar driver with dual silk dome tweeters, delivering clear, powerful sound. - [Lumi Audio 6.5" Wi-Fi & Bluetooth Ceiling Speakers – Active/Passive Pair - FLF-6WBS](https://connixtech.co.nz/product/lumi-audio-6-5-wi-fi-bluetooth-ceiling-speakers-active-passive-pair-flf-6wbs/): The LUMI AUDIO FLF-6WBS Wi-Fi and Bluetooth Ceiling Speakers provide convenient wireless music streaming with a discreet in-ceiling design. Featuring a 6.5-inch polypropylene woofer and a 1-inch silk dome tweeter, this active/passive speaker pair delivers clear vocals, smooth treble and powerful bass for residential and commercial audio installations. With Wi-Fi and Bluetooth connectivity, remote control support and a tool-free auto-locking installation mechanism, the FLF-6WBS offers a practical solution for modern distributed audio systems. - [DYNAMIX 6RU Mini Wall Mount Cabinet 10-Inch, Black - R10WM6](https://connixtech.co.nz/product/dynamix-6ru-mini-wall-mount-cabinet-10-inch-black-r10wm6/): DYNAMIX R10WM6 6RU mini wall-mount cabinet for 10-inch panels, measuring W280 × D200 × H329mm. Features a glass front door, wall-mount bracket and black powder-coated finish. Supplied flat-packed. - [Hikvision 6U Wall-Mount Cabinet – 600 × 450mm - DS-XS6406-S/B](https://connixtech.co.nz/product/hikvision-6u-wall-mount-cabinet-600-x-450mm-ds-xs6406-s-b/): The Hikvision DS-XS6406-S/B 6U Wall-Mount Cabinet provides a practical solution for housing and organising networking, telecommunications and security equipment. Designed to accommodate standard 19-inch rack-mounted devices, it is suitable for CCTV systems, network switches, patch panels, routers and other compatible equipment in commercial, industrial and residential installations. - [100 × 100mm Aluminium Post 1800mm Black - CX-BPS100](https://connixtech.co.nz/product/100-x-100mm-aluminium-post-1800mm-black-cx-ps100s/): 100 × 100mm aluminium post, 1800mm high, with mounting flange, finished in basic black powder coating. Suitable for gate automation, access control, intercom and security installations. - [Seagate Skyhawk 6TB Surveillance Hard Drive - ST6000 Series](https://connixtech.co.nz/product/seagate-skyhawk-6tb-surveillance-hard-drive-st6000-series/): Seagate SkyHawk Surveillance HDD is purpose-built for 24/7 CCTV recording in DVR and NVR systems. Featuring ImagePerfect™ firmware, it supports recording from up to 64 HD cameras, with reliable performance for continuous video surveillance. Ideal for security installers and professional surveillance applications - [3+3MP WizColor Hybrid-Zoom PT 4G Solar-Powered IPC - DH-IPC-PTS2649C-3E3Z-4GB2](https://connixtech.co.nz/product/33mp-wizcolor-hybrid-zoom-pt-4g-solar-powered-network-camera-dh-ipc-pts2649c-3e3z-4gb2/): The Dahua IPC-PTS2649C-3E3Z-4GB20 is a solar-powered 4G network camera designed for remote surveillance locations where mains power and wired internet are unavailable. Combining dual 3MP imaging, pan-and-tilt functionality, hybrid zoom and 4G connectivity, it provides flexible monitoring for farms, construction sites, gates, rural properties and other off-grid applications. Its solar power system supports installations in locations with limited infrastructure, while cellular connectivity enables remote viewing through a compatible mobile application. - [Hikvision Angle Wall Mounted Bracket - DS-KABV24-A](https://connixtech.co.nz/product/hikvision-angle-wall-mounted-bracket-ds-kabv24-a/): Surface-mount rain shield for Hikvision KV6103 and KV6113 series villa door stations, moulded in PC plastic. Keeps run-off off the camera and call button and shades the lens against low sun. Rated -40°C to 60°C. The Hikvision DS-KABV6114-RS Protective Shield / Rain Cover is designed to provide additional weather protection for compatible Hikvision villa intercom door stations. Made from durable polycarbonate (PC), this surface-mounted rain shield helps reduce direct exposure to rain and provides a neat, professional finish for outdoor intercom installations. Ideal for residential entrances, driveway gates and villa intercom systems, it is a practical accessory for security installers and access control professionals. - [Hikvision Rain/Sun Shroud - DS-KABV6114-RS](https://connixtech.co.nz/product/hikvision-rain-sun-shroud-ds-kabv6114-rs/): Surface-mount rain shield for Hikvision KV6103 and KV6113 series villa door stations, moulded in PC plastic. Keeps run-off off the camera and call button and shades the lens against low sun. Rated -40°C to 60°C. The Hikvision DS-KABV6114-RS Protective Shield / Rain Cover is designed to provide additional weather protection for compatible Hikvision villa intercom door stations. Made from durable polycarbonate (PC), this surface-mounted rain shield helps reduce direct exposure to rain and provides a neat, professional finish for outdoor intercom installations. Ideal for residential entrances, driveway gates and villa intercom systems, it is a practical accessory for security installers and access control professionals. - [CX Infrared Gate Safety Sensor Photocell - CX-SS12-SW](https://connixtech.co.nz/product/cx-infrared-gate-safety-sensor-photocell-cx-ss12-sw/): The CX-SS12-SW Safety Photocell Beam Sensor is designed to enhance safety for automatic gates by detecting obstructions in the beam path. Ideal for residential and commercial gate automation applications, it helps prevent gate movement when an obstacle is detected, supporting safer operation for vehicles and pedestrians. Suitable for use in compatible automatic gate systems, the CX-SS12-SW is a practical safety accessory for gate installers, security integrators and automation professionals. - [Hikvision Sliding Gate Motor Wireless Remote/Keyfob - DS-PC2002-WBCKV](https://connixtech.co.nz/product/hikvision-sliding-gate-motor-wireless-remote-keyfob-ds-pc2002-wbckv/): The Hikvision DS-PC2002-WBCKV wireless keyfob provides convenient remote access for compatible Hikvision gate and access control systems. Featuring reliable 433MHz wireless transmission and frequency-hopping technology to help resist interference, it is a practical accessory for residential and commercial installations. - [DYNAMIX 19" 1RU Unloaded 24 Port STP/UTP Patch Panel - PP-UK-24RMV2](https://connixtech.co.nz/product/dynamix-19-1ru-unloaded-24-port-stp-utp-patch-panel-pp-uk-24rmv2/): The DYNAMIX 24-Port Unloaded Keystone Patch Panel is designed for professional structured cabling installations in network cabinets and equipment racks. Supporting both STP and UTP keystone modules, this 1RU patch panel provides a flexible solution for Gigabit Ethernet networks, allowing installers to configure ports to suit their specific requirements. Built with durable steel construction and a black powder-coated finish, it includes a rear cable management bar, grounding wire and a plastic labelling kit for organised, reliable cable termination. - [Compact Pass-through Crimping Tool - CX-PTC05](https://connixtech.co.nz/product/compact-pass-through-crimping-tool-cx-ptc05/): The CX-PTC05 Light Weight Compact Crimping Tool is tool designed for professional network cable termination. Weighing much lighter than standard crimping tools, it offers improved handling, convenience and portability for installers and technicians. - [Dynamix Compact Push Through Crimper - PTC-CP](https://connixtech.co.nz/product/dynamix-compact-push-through-crimper-ptc-cp/): The DYNAMIX PTC-CP Compact Crimping Tool is a lightweight, compact tool designed for professional network cable termination. Weighing approximately 30% less than standard crimping tools, it offers improved handling, convenience and portability for installers and technicians. - [Hikvision IP Video Intercom Keypad Outdoor Station - DS-KV6124-WBE1](https://connixtech.co.nz/product/hikvision-ds-kv6124-wbe1-4mp-villa-door-station/): The Hikvision DS-KV6124-WBE1 Villa Door Station is a high-performance video intercom solution designed for residential properties, villas and small commercial premises. Featuring a 4MP high-resolution camera with a 150° wide viewing angle, it provides clear video monitoring and a wider view of visitors at the entrance. Supporting multiple unlocking methods, including access card, PIN code, Bluetooth, Hik-Connect app and indoor station control, this door station offers convenient and flexible access management. It supports control of two locks, enhancing entrance security and access convenience. Video recording and playback are available through Hik-Connect or the PC web interface. With standard IEEE 802.3at PoE support, the device can receive power and network connectivity through a compatible PoE connection, simplifying installation. An ideal solution for modern residential access control, the DS-KV6124-WBE1 combines video intercom, visitor identification and smart door access in one compact unit. - [Hikvision 8 Channel 8 PoE Vpro AcuSeek Series NVR - DS-7608NXI-I2/8P/VPro](https://connixtech.co.nz/product/hikvision-8-channel-8-poe-vpro-acuseek-series-nvr-ds-7608nxi-i2-8p-vpro/): he Hikvision DS-7608NXI-I2/8P/VPro is an intelligent 8-channel network video recorder featuring AcuSeek and AcuSearch functions powered by Guanlan large-scale AI models. Designed for professional CCTV surveillance, it supports advanced video investigation, facial recognition, efficient video compression and high-performance decoding for security installations. With 8 built-in PoE ports, dual SATA hard drive interfaces and advanced H.265+ video compression, this NVR simplifies camera installation while helping optimise storage usage. It also supports remote monitoring through Hik-Connect, making it a practical solution for installers and security professionals. - [Hikvision 16 Channel All PoE 8K NVR Ultra M Series - DS-7616NI-M2/16P](https://connixtech.co.nz/product/hikvision-ds-7616ni-m2-16p-16-channel-8k-poe-nvr/): The Hikvision DS-7616NI-M2/16P is a 16-channel 8K network video recorder featuring 16 built-in PoE ports, dual HDD support and advanced H.265+ video compression. Designed for professional CCTV installations, it supports high-resolution IP cameras, 8K HDMI output and convenient plug-and-play connectivity for commercial, industrial and residential security systems applications. With 8 built-in PoE ports, dual SATA hard drive interfaces and advanced H.265+ video compression, this NVR simplifies camera installation while helping optimise storage usage. It also supports remote monitoring through Hik-Connect, making it a practical solution for installers and security professionals. - [Hikvision 8 Channel PoE NVR M Series - DS-7608NI-M2/8P](https://connixtech.co.nz/product/hikvision-ds-7608ni-m2-8p-8-channel-poe-nvr/): The Hikvision DS-7608NI-M2/8P 8-Channel PoE NVR is a high-performance M Series network video recorder designed for professional IP CCTV surveillance systems. Supporting up to 8 IP camera channels and HDMI output up to 8K resolution, it delivers high-definition monitoring and reliable video recording for residential, commercial and business security applications. With 8 built-in PoE ports, dual SATA hard drive interfaces and advanced H.265+ video compression, this NVR simplifies camera installation while helping optimise storage usage. It also supports remote monitoring through Hik-Connect, making it a practical solution for installers and security professionals. - [Hikvision 2-Wire Video Intercom Kit - DS-KIS708EY](https://connixtech.co.nz/product/hikvision-2-wire-hybrid-video-intercom-kit/): The Hikvision DS-KIS708EY is a 2-wire HD video intercom kit featuring a 2MP outdoor door station with built-in keypad and a 7-inch touchscreen indoor monitor. With Hik-Connect mobile app support, remote door unlocking and simple plug-and-play installation, it is ideal for villas and residential properties. - [Hikvision 8Ch 6MP Cameras IP CCTV Kit - HK-H8266M-K2](https://connixtech.co.nz/product/hikvision-8ch-6-cameras-ip-cctv-kit-hk-h8266m-k2/): Hikvision 8channel 6MP AcuSesne Smart IP CCTV Kit – HK-H8266M-K2 is a complete plug-and-play surveillance solution featuring 1 × DS-7608NI-M2-8P-M 8-ch 1U 8 PoE 8K NVR and 6 × DS-2CD2366G2-IU – 6 MP AcuSense Fixed Turret Network Cameras with 2.8mm lense, acusense technology, darkfighter and ip67. Designed for homes and small businesses, the system combines high-resolution 6MP imaging, AI human and vehicle classification for smarter security protection. - [Ruijie Reyee 16 Port PoE 2 Uplink 100 Mbps Unmanaged PoE Switch - RG-ES118FGS-LP](https://connixtech.co.nz/product/ruijie-reyee-16-port-poe-switch-rg-es118fgs-lp-connix/): Ruijie Reyee RG-ES118FGS-LP is an 18-port unmanaged PoE switch featuring 16 × 10/100 Mbps PoE+ ports, 2 × Gigabit uplink ports and a 120 W PoE budget. Ideal for CCTV, IP cameras, access control and security networking applications. - [Ruijie Reyee 4 Port PoE 2 uplink 10/100 Mbps Unmanaged PoE Switch - RG-ES106F-P](https://connixtech.co.nz/product/ruijie-reyee-4-port-poe-2-uplink-10-100-mbps-unmanaged-poe-switch-rg-es106f-p/): Ruijie Reyee RG-ES106F-P is a compact 6-port 10/100 Mbps unmanaged PoE switch featuring 4 PoE ports and 2 uplink ports. Designed for CCTV, IP cameras, access control and other PoE applications, it provides reliable plug-and-play connectivity for security installations. - [Ruijie Reyee 10-Port 10/100 Mbps Unmanaged PoE Switch - RG-ES110F-P](https://connixtech.co.nz/product/ruijie-reyee-10-port-10-100-mbps-unmanaged-poe-switch-rg-es110f-p/): The Ruijie Reyee RG-ES110F-P is a compact, plug-and-play PoE switch designed for CCTV surveillance, IP cameras, access control and other PoE network devices. It provides 10 × 10/100 Mbps RJ45 ports, including 8 × PoE+ ports with a total 110 W PoE budget - [Optex Photoelectric Beam Detector Weatherproof 60m Short Range - AX-200TN](https://connixtech.co.nz/product/optex-photoelectric-beam-detector-weatherproof-60m-short-range-ax-200tn/): The AX-200TN is a compact, weatherproof short range photoelectric beam detector with 60 m detection. Its IP65 housing uses rubber packing at the wiring holes, wire ports and outer chassis to keep out water, dust and insects, so it stays reliable in harsh outdoor conditions. With 99% beam blocking stability, lightning and surge protection and an anti-frost hood cover, it detects human intruders only, which reduces false alarms. - [Optex Photoelectric Beam Detector Weatherproof 40m Short Range - AX-130TN](https://connixtech.co.nz/product/optex-photoelectric-beam-detector-weatherproof-40m-short-range-ax-130tn/): The AX-130TN is a compact, weatherproof short range photoelectric beam detector with 40 m detection. Its IP65 housing uses rubber packing at the wiring holes, wire ports and outer chassis to keep out water, dust and insects, so it stays reliable in harsh outdoor conditions. With 99% beam blocking stability, lightning and surge protection and an anti-frost hood cover, it detects human intruders only, which reduces false alarms. - [Optex Photoelectric Beam Detector Weatherproof 20m Short Range - AX-70TN](https://connixtech.co.nz/product/optex-photoelectric-beam-detector-weatherproof-20m-short-range-ax-70tn/): The AX-70TN is a compact, weatherproof short range photoelectric beam detector with 20 m detection. Its IP65 housing uses rubber packing at the wiring holes, wire ports and outer chassis to keep out water, dust and insects, so it stays reliable in harsh outdoor conditions. With 99% beam blocking stability, lightning and surge protection and an anti-frost hood cover, it detects human intruders only, which reduces false alarms. - [Optex FlipX Standard PIR Motion Detector PET Immune 12M Wide Angle - FLX-S-ST](https://connixtech.co.nz/product/optex-flipx-standard-pir-motion-detector-pet-immune-12m-wide-angle-flx-s-st/): FLX-S-ST: Indoor PIR Motion Detector (Standard) A reliable indoor passive infrared detector for wall or corner mounting. It offers wide coverage up to 12 m at 85° or a long narrow beam up to 18 m, and digital temperature compensation (SMDA) keeps detection stable as conditions change. With a low current draw, a tamper output that opens when the cover is removed, and an operating range of -20°C to +50°C, it suits home and commercial alarm installations. A hardwired indoor PIR detector with a rotatable lens, so you can choose 12 m wide coverage or 18 m narrow coverage to suit the room. A new pyroelectric element gives superior pet tolerance, and the detector is Grade 2 rated. It mounts on a wall or in a corner at a variable height of 2.0 to 3.0 m. - [FERMAX Q Series V3W WiFi Flush Mount Intercom Keypad Kit – FVQ-6030APP-V3B](https://connixtech.co.nz/product/fermax-q-series-v3w-wifi-flush-mount-intercom-keypad-kit-fvq-6030app-v3b/): The Qseries FVQ-6030-V3W WiFi Surface Mount Intercom Keypad Kit is a compact and versatile access control solution combining video intercom, keypad entry and remote door/gate access. Ideal for residential and small commercial applications, it provides convenient visitor communication and secure PIN-based entry via a WiFi-connected system. - [FERMAX Q Series V3W Flush Mount Intercom Keypad Kit – FVQ-6030-V3B](https://connixtech.co.nz/product/fermax-q-series-v3w-flush-mount-intercom-keypad-kit-fvq-6020-v3b/): The Qseries FVQ-6030-V3W 2 Wire Surface Mount Intercom Keypad Kit is a compact and versatile access control solution combining video intercom, keypad entry and remote door/gate access. Ideal for residential and small commercial applications, it provides convenient visitor communication and secure PIN-based entry. - [FERMAX Q Series V3W WiFi Single Button Intercom Kit – FVQ-6040APP-V3B](https://connixtech.co.nz/product/fermax-q-series-v3w-wifi-single-button-intercom-kit-fvq-6040app-v3b/): The Qseries FVQ-6040APP-V3W WiFi Single Button Intercom Kit is a compact and versatile access control solution combining video intercom and remote door/gate access. Ideal for residential and small commercial applications, it provides convenient visitor communication and secure entry via a WiFi-connected system. - [FERMAX Q Series V3W Surface Mount Intercom Kit – FVQ-6040-V3B](https://connixtech.co.nz/product/fermax-q-series-v3w-intercom-single-button-kit-fvq-6040-v3b/): The Q Series FVQ-6040-V3B 2 Wire Intercom Single Button Kit is a compact and versatile access control solution combining video intercom, remote door/gate access. Ideal for residential and small commercial applications. - [FERMAX Q Series V3W Intercom Keypad Kit – FVQ-6020-V3B](https://connixtech.co.nz/product/fermax-q-series-v3w-intercom-keypad-kit-fvq-6020-v3v/): The Qseries V3W 2 Wire Intercom Keypad Kit is a compact and versatile access control solution combining video intercom, keypad entry and remote door/gate access. Ideal for residential and small commercial applications, it provides convenient visitor communication and secure PIN-based entry. - [Hilook IP Wireless Video Intercom Kit - HA-KIT-IP2](https://connixtech.co.nz/product/hilook-ip-wireless-video-intercom-kit-ha-kit-ip2/): HiLook HA-KIT-IP2 Wireless PoE IP Video Intercom Kit is a complete door-entry solution featuring a 2MP outdoor intercom station, 7-inch indoor touchscreen monitor. Powered by power adapters or PoE connectivity and Hik-Connect mobile app support, users can answer visitors, communicate and control door access remotely. - [DYNAMIX 12RU Universal Swing Wall Mount Cabinet - RSFDS12-600](https://connixtech.co.nz/product/dynamix-12ru-universal-swing-wall-mount-cabinet-rsfds12-600/): The DYNAMIXRSFDS12-600 is a 12RU 600mm deep universal swing wall-mount cabinet supplied fully assembled and ready to use. Its removable back-mount plate and reversible left/right hinges make installation and servicing easy, even in tight spaces, with cable entry at the rear, top and bottom. Includes a fixed shelf, cage nuts, a drop-in dual-fan kit, removable lockable side panels and a lockable safety-glass front door. Measures 600(W) × 600(D) × 650mm(H) with a 60kg load rating; gloss-black finish. - [DYNAMIX 12RU Universal Swing Wall Mount Cabinet - RSFDS12](https://connixtech.co.nz/product/dynamix-12ru-universal-swing-wall-mount-cabinet-rsfds12/): The DYNAMIXRSFDS12 is a 12RU universal swing wall-mount cabinet supplied fully assembled and ready to use. Its removable back-mount plate and reversible left/right hinges make installation and servicing easy, even in tight spaces, with cable entry at the rear, top and bottom. Includes a fixed shelf, cage nuts, a drop-in dual-fan kit, removable lockable side panels and a lockable safety-glass front door. Measures 600(W) × 550(D) × 650mm(H) with a 60kg load rating; gloss-black finish. - [DYNAMIX 9RU Universal Swing Wall Mount Cabinet - RSFDS9](https://connixtech.co.nz/product/dynamix-9ru-universal-swing-wall-mount-cabinet-rsfds9/): The DYNAMIX RSFDS9 is a 9RU universal swing wall-mount cabinet supplied fully assembled and ready to use. Its removable back-mount plate and reversible left/right hinges make installation and servicing easy, even in tight spaces, with cable entry at the rear, top and bottom. Includes a fixed shelf, cage nuts, a drop-in dual-fan kit, removable lockable side panels and a lockable safety-glass front door. Measures 600(W) × 550(D) × 500mm(H) with a 60kg load rating; gloss-black finish. - [PD 15W 8" Ceiling Speaker 100V](https://connixtech.co.nz/product/pd-15w-8-ceiling-speaker-100v/) - [PD 10Watt 4 Inch 2-Way Wall Mount Speaker 100V](https://connixtech.co.nz/product/pd-10watt-4-inch-2-way-wall-mount-speaker-100v/): The PD 10Watt 4 Inch 2-Way Wall Mount Speaker 100V is a high-quality two-way speaker designed for clear music and voice reproduction in commercial PA applications. Featuring a 4" woofer, ½" Mylar tweeter and bass-reflex design, it delivers balanced sound across a wide frequency range. Supplied as a pair with mounting brackets for horizontal or vertical installation. - [CX-MJ868 Wire Tracker & Cable Tester – RJ45/RJ11 Network Cable Tracer](https://connixtech.co.nz/product/cx-mj868-wire-tracker-cable-tester-rj45-rj11-network-cable-tracer/): Professional wire tracking and cable testing tool for quickly identifying and tracing RJ45, RJ11 and other low-voltage cables. Features adjustable volume, LED signal indication and up to 2 km signal transmission. - [Hikvision Hilook Wall Mount Bracket - DS-220AZJ-130-WA](https://connixtech.co.nz/product/hikvision-hilook-wall-mount-bracket-ds-220azj-130-wa/): Hikvision 220AZJ-130 Universal Camera Bracket is a versatile mounting accessory designed for compatible Hikvision and HiLook cameras, including selected ColorVu 3.0 and AcuSense models. It provides a secure and practical mounting solution for professional CCTV installations, helping achieve flexible camera positioning and a clean, reliable finish. - [Hikvision 16Ch 6MP AcuSense IP Surveillance CCTV Kit - HK-6866G2-K1](https://connixtech.co.nz/product/hikvision-16ch-6mp-acusense-ip-surveillance-cctv-kit-hk-6866g2-k1/): Hikvision 16channel 6MP AI IP Surveillance CCTV Kit – HK-6866G2-K1 is a complete plug-and-play surveillance solution featuring 1 × DS-7616NI-M2-16P 16-ch 1U 16 PoE 4K 2HDDs NVR and 8 × DS-2CD2366G2-ISU-SL 6MP AcuSense 2 Way Active Deterrence Fixed Turret IPC with 2.8mm lenses. Designed for homes and small businesses, the system combines high-resolution 6MP imaging, AI human and vehicle classification for smarter security protection. 8 × - [HiLook Pro 16Ch 6MP 8 Cameras IP Surveillance CCTV Kit - HL-6861M-K1](https://connixtech.co.nz/product/hilook-pro-16ch-6mp-8-camera-ip-surveillance-cctv-kit-hl-6861m-k1/): HiLook Pro Series 16channel 6MP AI IP Surveillance CCTV Kit – HL-6861M-K1 is a complete plug-and-play surveillance solution featuring 1 × NVR-216MH-K/16P 16-ch 16 PoE 4K 2HDDs NVR and 8 × IPC-T361H 6MP AI IP Turret Cameras with 2.8mm lenses. Designed for homes and small businesses, the system combines high-resolution 6MP imaging, AI human and vehicle classification and Active Deterrence for smarter security protection. - [CX Wired Internal Top Hat Surface Mount Piezo Siren - CX-IS12](https://connixtech.co.nz/product/cx-wired-internal-top-hat-surface-mount-piezo-siren-cx-is12/): The CX-IS12 is a compact, Top hat surface mount internal piezo siren designed for residential and commercial alarm systems. With a powerful 108dB output, it delivers a clear, attention-grabbing alert to notify occupants of an intrusion or system trigger — while its low-profile design mounts neatly and discreetly indoors. - [CX Wired Internal Flush Plate Piezo Siren (PDL Style) - CX-ISM03](https://connixtech.co.nz/product/cx-wired-internal-flush-plate-piezo-siren-pdl-style-cx-ism03/): The CX-ISM03 is an internal flush plate piezo siren designed to match PDL-style switch plates for a seamless, integrated look within residential and commercial alarm installations. Delivering a strong 108dB output, it provides a clear, attention-grabbing alert while its flush plate design blends neatly into standard wall fittings. - [CX Wired Internal Flush Mount Piezo Siren - CX-IS05](https://connixtech.co.nz/product/cx-wired-internal-flush-mount-piezo-siren-cx-is05/): The CX-IS05 is a compact, flush-mount internal piezo siren designed for residential and commercial alarm systems. With a powerful 108dB output, it delivers a clear, attention-grabbing alert to notify occupants of an intrusion or system trigger — while its low-profile design mounts neatly and discreetly indoors. - [CX Outdoor Wired Siren & Strobe - CX-SS14](https://connixtech.co.nz/product/cx-outdoor-wired-siren-strobe-cx-ss14/): The CX-SS14 Outdoor Wired Siren & Strobe is a compact external alarm sounder designed to provide a high-volume audible alert and visual LED indication during alarm events. Featuring a blue dome, white enclosure and tamper switch, it is suitable for residential and commercial security alarm installations. - [TVT 6MP IR Turret Network Camera Black - TD-9564E3B-A-B](https://connixtech.co.nz/product/tvt-6mp-ir-turret-network-camera-black-td-9564e3b-a-b/): TVT TD-9564E3B-A is a professional 6MP IR waterproof Black turret IP camera designed for reliable day-and-night surveillance. It delivers high-resolution video with infrared night vision, providing clear monitoring in low-light and nighttime conditions. Its weather-resistant turret design makes it suitable for indoor and outdoor CCTV installations, including residential, commercial and industrial applications. - [Qseries 2-Wire Backing Box For Flush Keypad Door Station - FVQ-BB-6016KP-F](https://connixtech.co.nz/product/qseries-2-wire-backing-box-for-flush-keypad-door-station-fvq-bb-6016kp-f/): he Qseries 2-Wire Backing Box (FVQ-BB-6016KP-F) is designed for flush installation of the Qseries keypad door station, providing a secure recessed mounting enclosure for a clean and professional finish. - [Qseries 2-Wire Keypad Door Station Rain hood - FVQ-RH-6016KP](https://connixtech.co.nz/product/qseries-2-wire-keypad-door-station-rain-hood-fvq-rh-6016kp/): Qseries 2-Wire Keypad Door Station Rain Hood – Protective rain hood designed to provide additional weather protection for the Qseries 2-Wire Keypad Door Station. - [FERMAX Q Series V3W WiFi Intercom Keypad Kit – FVQ-6020APP-V3B](https://connixtech.co.nz/product/fermax-q-series-v3w-wifi-intercom-keypad-kit-fvq-6020app-v3b/): The Qseries V3W WiFi Intercom Keypad Kit is a compact and versatile access control solution combining video intercom, keypad entry and remote door/gate access. Ideal for residential and small commercial applications, it provides convenient visitor communication and secure PIN-based entry via a WiFi-connected system. - [6 MP Smart Hybrid Light ColorVu Fixed Turret Network Camera - DS-2CD2367G3-LI2UY](https://connixtech.co.nz/product/6-mp-smart-hybrid-light-colorvu-fixed-turret-network-camera-ds-2cd2367g3-li2uy/): The Hikvision DS-2CD2367G3-LI2UY is a high-performance 6MP ColorVu 3.0 Smart Hybrid Light turret camera designed to deliver clear, detailed 24/7 colour imaging. Featuring an F1.0 super-aperture lens, HikAI-ISP, up to 130 dB WDR and deep-learning human and vehicle classification, it provides reliable surveillance in challenging lighting conditions. Its Smart Hybrid Light technology intelligently combines IR and white-light illumination, providing up to 30 m supplemental lighting while helping maintain clear night-time images. The built-in dual microphone, H.265+ compression and IP67 weather-resistant design make it an excellent choice for residential, commercial and professional CCTV installations. - [TVT TD-YXH0301 JUNCTION BOX](https://connixtech.co.nz/product/tvt-td-yxh0301-junction-box/): TVT TD-YXH0301 Camera Junction Box is a durable and practical mounting accessory designed for compatible TVT cameras. It provides a neat solution for concealing and protecting camera cables, helping create a clean, professional installation. Suitable for wall or ceiling mounting, it is ideal for both indoor and outdoor CCTV installations. - [TD-YXH0104 Junction Box for Cameras](https://connixtech.co.nz/product/td-yxh0104-junction-box-for-cameras/): Junction box for cameras, available for wall or ceiling mounting. - [TVT 6MP IR Turret Network Camera - TD-9564E3B-A](https://connixtech.co.nz/product/tvt-6mp-ir-turret-network-camera-td-9564e3b-a/): TVT TD-9564E3B-A is a professional 6MP IR waterproof turret IP camera designed for reliable day-and-night surveillance. It delivers high-resolution video with infrared night vision, providing clear monitoring in low-light and nighttime conditions. Its weather-resistant turret design makes it suitable for indoor and outdoor CCTV installations, including residential, commercial and industrial applications. - [TVT 16 Channel 4 HDD PoE NVR - TD-3316H4-16P-B2](https://connixtech.co.nz/product/tvt-16-channel-4-hdd-poe-nvr-td-3316h4-16p-b2/): TVT TD-3316H1-16P-B2-B 16-Channel AI PoE NVR is a high-performance network video recorder supporting up to 16CH IP cameras with resolutions up to 16MP, with 16 built-in PoE ports for direct plug-and-play camera connection. It supports H.265S/H.265+/H.265/H.264 compression and 16-channel simultaneous playback, with multiple recording modes including manual, scheduled, motion, sensor, POS and AI recording. Advanced AI features include face detection and comparison, license plate recognition (LPR) and multiple VCA events such as object abandoned/missing, region intrusion, tripwire and video exception detection. The NVR also supports 4K output, ONVIF and third-party IPC compatibility, POS overlay, PTZ control, remote web/CMS access, NAT and mobile surveillance, making it a versatile solution for residential, commercial and professional CCTV installations. - [TVT 8 Channel Single HDD PoE NVR - TD-3308H1-8P-B2-B](https://connixtech.co.nz/product/tvt-8-channel-single-hdd-poe-nvr-td-3308h1-8p-b2-b/): TVT TD-3308H1-8P-B2-B 8-Channel AI PoE NVR is a compact and powerful network video recorder designed for advanced IP CCTV surveillance. Featuring 8 built-in PoE ports for plug-and-play camera connectivity, it supports AI-powered face detection and comparison, multiple VCA (Video Content Analytics) functions including object abandoned/missing, region intrusion, tripwire and video exception detection, as well as license plate recognition (LPR). With efficient video compression and intelligent event management, it provides a reliable solution for residential, commercial and professional security installations. - [HiLook Pro 4K 8Ch All-in-One 8MP Cameras IP CCTV Kit - HL-8489M-K1](https://connixtech.co.nz/product/hilook-pro-8ch-all-in-one-4-camera-ip-cctv-kit-hl-8489m-k1/): HiLook Pro4K 8MP Series 8channel 8MP All-In-One IP CCTV Kit – HL-8489M-K1 is a complete plug-and-play surveillance solution featuring 1 × NVR-108MH-K/4P 8-channel PoE NVR and 4 × IPC-T289H-MU/SL 8MP All-In-One IP Turret Cameras with 2.8mm lense, strobes, two way talk and ip67. Designed for homes and small businesses, the system combines high-resolution 8MP imaging, AI human and vehicle classification and Active Deterrence for smarter security protection. - [Hilook Pro16 Channel NVR with Dual HDD Bay - NVR-216MH-K/16P](https://connixtech.co.nz/product/hilook-16-channel-nvr-with-dual-hdd-bay-nvr-216mh-k-16p/): HiLook NVR-216MH-K/16P 16-Channel PoE Network Video Recorder – A reliable 16-channel NVR featuring 16 built-in PoE ports, high-resolution recording up to 12MP, H.265+ compression, and efficient video management. Ideal for professional IP CCTV installations requiring a simple, integrated recording and PoE solution. - [HiLook Pro 4K 4Ch All-in-One 8MP Cameras IP CCTV Kit - HL-4489M-K1](https://connixtech.co.nz/product/hilook-pro-4k-4ch-all-in-one-4-cameras-ip-cctv-kit-hl-4489m-k1/): HiLook Pro Series 4channel 4K 8MP All-In-One IP CCTV Kit – HL-4689M-K1 is a complete plug-and-play surveillance solution featuring 1 × NVR-104MH-K/4P 4-channel PoE NVR and 4 × IPC-T289H-MU/SL 4K 8MP All-In-One IP Turret Cameras with 2.8mm lense, strobes, two way talk and ip67. Designed for homes and small businesses, the system combines high-resolution 8MP imaging, AI human and vehicle classification and Active Deterrence for smarter security protection. - [HiLook Pro 16Ch All-in-One 6MP Cameras IP Surveillance CCTV Kit - HL-6869M-K1](https://connixtech.co.nz/product/hilook-pro-16ch-all-in-one-8-camera-ip-cctv-kit-hl-6869m-k1/): HiLook Pro Series 16channel 6MP All-In-One IP Surveillance CCTV Kit – HL-6869M-K2 is a complete plug-and-play surveillance solution featuring 1 × NVR-216MH-K/16P 16-ch 16 PoE 4K 2HDDs NVR and 8 × IPC-T269H-MU/SL 6MP All-In-One IP Turret Cameras with 2.8mm lenses. Designed for homes and small businesses, the system combines high-resolution 6MP imaging, AI human and vehicle classification and Active Deterrence for smarter security protection. - [HiLook Pro 8Ch All-in-One 6MP Cameras IP CCTV Kit - HL-8669M-K2](https://connixtech.co.nz/product/hilook-pro-8ch-all-in-one-6-camera-ip-cctv-kit-hl-8669m-k2/): HiLook Pro Series 8channel 6MP All-In-One IP CCTV Kit – HL-8669M-K2 is a complete plug-and-play surveillance solution featuring 1 × NVR-108MH-K/4P 8-channel PoE NVR and 6 × IPC-T269H-MU/SL 6MP All-In-One IP Turret Cameras with 2.8mm lense, strobes, two way talk and ip67. Designed for homes and small businesses, the system combines high-resolution 6MP imaging, AI human and vehicle classification and Active Deterrence for smarter security protection. - [HiLook Pro 8Ch All-in-One 4 6MP Cameras IP CCTV Kit - HL-8469M-K1](https://connixtech.co.nz/product/hilook-pro-4ch-all-in-one-4-camera-ip-cctv-kit-hl-8469m-k1/): HiLook Pro Series 8channel 6MP All-In-One IP CCTV Kit – HL-8469M-K1 is a complete plug-and-play surveillance solution featuring 1 × NVR-108MH-K/4P 8-channel PoE NVR and 4 × IPC-T269H-MU/SL 6MP All-In-One IP Turret Cameras with 2.8mm lense, strobes, two way talk and ip67. Designed for homes and small businesses, the system combines high-resolution 6MP imaging, AI human and vehicle classification and Active Deterrence for smarter security protection. - [Hikvision Hilook Wall Mount Bracket - DS-220AZJ-145-WA](https://connixtech.co.nz/product/hikvision-hilook-wall-mount-bracket-ds-220azj-145-wa/): Hikvision 220AZJ-145 Universal Camera Bracket is a versatile mounting accessory designed for compatible Hikvision and HiLook cameras, including selected ColorVu 3.0 and AcuSense models. It provides a secure and practical mounting solution for professional CCTV installations, helping achieve flexible camera positioning and a clean, reliable finish. - [Hilook Pro 8MP Smart All-in-One IP Turret Camera Black - IPC-T289H-MU-SL-BLK](https://connixtech.co.nz/product/hilook-pro-8mp-smart-all-in-one-ip-turret-camera-black-ipc-t289h-mu-sl-blk/): Hilook Pro 8MP Smart All-in-One Turret IP camera with built-in speaker, Red & Blue flash light, white strobe light, and AcuSense AI for active deterrence. - [HiLook Pro 4Ch All-in-One 4 6MP Cameras IP CCTV Kit - HL-4469M-K1](https://connixtech.co.nz/product/hilook-pro-4ch-all-in-one-4-camera-ip-cctv-kit-hl-4469m-k1/): HiLook Pro Series 4channel 6MP All-In-One IP CCTV Kit – HL-4669M-K1 is a complete plug-and-play surveillance solution featuring 1 × NVR-104MH-K/4P 4-channel PoE NVR and 4 × IPC-T269H-MU/SL 6MP All-In-One IP Turret Cameras with 2.8mm lense, strobes, two way talk and ip67. Designed for homes and small businesses, the system combines high-resolution 6MP imaging, AI human and vehicle classification and Active Deterrence for smarter security protection. - [16CH 2HDDs POE WizSense Network Video Recorder - DHI-NVR4216-16P-AI/ANZ](https://connixtech.co.nz/product/16ch-2hdds-poe-wizsense-network-video-recorder-dhi-nvr4216-16p-ai-anz/): 16CH 1U 16PoE 2HDD WizSense Network Video Recorder delivers powerful AI-enabled video management with up to 256 Mbps bandwidth, support for cameras up to 16MP, and decoding of up to 16 × 1080p or 4 × 8MP channels. Featuring built-in 16-port PoE, advanced AI analytics, face detection and recognition, perimeter protection, SMD, people counting and EPTZ, it provides a reliable and intelligent surveillance solution for commercial and residential applications. - [4MP 5x TiOC WizSense Network PTZ Camera - DH-SD3E405DB-GNY-A-PV1](https://connixtech.co.nz/product/4mp-5x-tioc-wizsense-network-ptz-camera-dh-sd3e405db-gny-a-pv1/): 4MP 5× TiOC WizSense Network PTZ Camera delivers high-quality 4MP surveillance with 5× optical zoom, Smart Dual Light technology, AI-powered human and vehicle classification, and active deterrence. Featuring two-way audio, up to 50 m IR and 30 m white-light illumination, plus IP66 and 6000V surge protection, it provides reliable 24/7 security for demanding outdoor applications. - [Hikvision Junction Box - DS-1260ZJ](https://connixtech.co.nz/product/hikvision-junction-box-ds-1260zj/): Hikvision junction box accessory for bullet cameras, concealing cables and providing a clean installation finish. - [Hikvision 6MP AcuSense Fixed Bullet Network Camera - DS-2CD2T66G2-4I](https://connixtech.co.nz/product/hikvision-6mp-acusense-fixed-bullet-network-camera-ds-2cd2t66g2-4i/): The Hikvision DS-2CD2T66G2-4I is a 6MP AcuSense fixed bullet network camera delivering sharp 3200 × 1800 resolution with advanced human and vehicle detection. Featuring excellent low-light performance, 120 dB True WDR, powerful IR illumination and IP67 weather protection, it is ideal for reliable outdoor security surveillance. - [Hikvision 30m Infrared Beam Detector - DS-K7IR01](https://connixtech.co.nz/product/hikvision-30m-infrared-beam-detector-no-nc-output-ds-k7ir01/): The Hikvision DS-K7IR01 is an infrared beam detector designed to provide reliable perimeter and entrance protection. It supports NO/NC signal output and features an easy alignment system with a built-in light indicator. With a maximum transmission distance of 30 metres, it is suitable for entrance gates, intrusion alarms and other security applications. - [Hilook Dual Lens 180 Degree 4K 8MP Panoramic Turret Camera Black - IPC-T289PH-MU-SL-BLK](https://connixtech.co.nz/product/hilook-dual-lens-180-degree-4k-8mp-panoramic-turret-camera-ipc-t289ph-mu-sl-blk/): Hilook Black dual-lens 180-degree panoramic 4K 8MP turret IP camera for wide-area coverage with active deterrence. - [Hilook 6MP Smart All-in-One IP Turret Camera Black - IPC-T269H-MU-SL-BLK](https://connixtech.co.nz/product/hilook-6mp-smart-all-in-one-ip-turret-camera-black-ipc-t269h-mu-sl-blk/): Hilook Black 6MP Smart All-in-One turret IP camera with built-in speaker, strobe light, and AcuSense AI for active deterrence. - [CX Century PS 12V 18AH Rechargeable Sealed Lead Acid Battery - 12V 18AH Battery](https://connixtech.co.nz/product/cx-century-ps-12v-18ah-rechargeable-sealed-lead-acid-battery-12v-18ah-battery/): Century 12V 18AH rechargeable sealed lead acid (SLA) battery, suitable for longer backup applications for UPS, and access control backup power. - [Wireless Bluetooth & Wi-Fi Ceiling Speaker - AV-WFC50W ](https://connixtech.co.nz/product/wireless-bluetooth-wi-fi-ceiling-speaker-av-wfc50w/): Wireless Bluetooth & Wi-Fi Ceiling Speaker - AV-WFC50W Premium multi-room audio built for demanding listening environments. This 2-way in-ceiling speaker combines a high-end Kevlar driver with dual silk dome tweeters, delivering clear, powerful sound whether you're streaming via Bluetooth, Wi-Fi, Spotify Connect, or Apple AirPlay. Designed for spaces where audio quality really matters — from high-end residential installs to commercial and hospitality environments. - [Wireless Wi-Fi Speaker Active & Passive - AV-WF25W](https://connixtech.co.nz/product/wireless-wi-fi-speaker-active-passive-av-wf25w/): Wireless Wi-Fi Speaker (Active 25W + Passive 25W) — AV-WF25W Wire-free background music, streamed straight from your phone. The AV-WF25W is a compact wall-mount Wi-Fi speaker system designed for small spaces where a simple background music setup is needed — cafes, offices, retail counters, or home rooms. Stream directly from your iPhone, iPad, or Android device using the Muzo App, with no cabling required between your source and the speakers. - [Ruckus Unleashed R350 Indoor 802.11ax Wi-Fi 6 Access Point - 9U1-R350-WW02](https://connixtech.co.nz/product/ruckus-unleashed-r350-indoor-802-11ax-wi-fi-6-access-point-9u1-r350-ww02/): Ruckus R350 Unleashed Indoor Access Point (9U1-R350-WW02) Enterprise-grade Wi-Fi 6 performance, sized for small and medium spaces. The Ruckus R350 brings reliable, high-capacity wireless connectivity to smaller sites without the enterprise price tag. Built on 802.11ax (Wi-Fi 6) with Ruckus' patented performance and interference-mitigation technology, it delivers consistent coverage even in dense, high-demand environments — all in a compact, easy-to-deploy form factor. - [230V to 24V DC Power supply - CX-PS24V12](https://connixtech.co.nz/product/230v-to-24v-dc-power-supply-cx-ps24v12/): CX- PS24V12 24V DC 1.2A Power Adapter Reliable everyday power for networking, CCTV, and low-voltage devices. This compact plug-in adapter delivers a stable 24V DC output, making it a versatile go-to power source for routers, network switches, CCTV cameras, LED strips, and other 24V-powered equipment. - [230V to 12V Power supply - LPV-20-12](https://connixtech.co.nz/product/230v-to-12v-power-supply-lpv-20-12/): The LPV-20-12 delivers a stable 12VDC output with universal AC input, making it a drop-in solution for indoor and outdoor installations. Fully encapsulated to IP67, it's built to handle moisture and dust without a fuss — no fan, no maintenance, just consistent power. - [AVTRON 240W 100V PA Mixer Amplifier - AMC-240WD](https://connixtech.co.nz/product/avtron-240w-100v-pa-mixer-amplifier-amc-240wd/): The AVTRON AMC-240WD is a 240W RMS mixer amplifier for large venues and high speaker counts — warehouses, function centres, showrooms and multi-zone commercial PA. Bluetooth/USB/FM/SD media, mic/line inputs and 100V,70V LMT out or 4,8,&16Ω line outputs, supported 19" rack mount. - [Hikvision Wireless PIR-Camera Detector Black - DS-PDPC12PF-EG2-WB-BLK](https://connixtech.co.nz/product/hikvision-wireless-pir-camera-detector-black-ds-pdpc12pf-eg2-wb-blk/): The DS-PDPC12PF-EG2-WB(B) is a wireless PIR-Camera Detector from Hikvision's AX PRO wireless alarm range. It provides 12m detection at 90° and Two-Way RF Wireless. Features include up to 30KG pet immunity and SEC (Smart Environmental Control) - Advanced digital signal processing and 3D optics. Measures 72.2mm × 120.5mm × 56.7mm and operates from -10 °C to 55 °C (14 °F to 131 °F). - [3+3MP WizColor Hybrid-zoom PT 4G Solar IPC - DH-IPC-PTS2649C-3E3Z-4GB20](https://connixtech.co.nz/product/3-3mp-wizcolor-hybrid-zoom-pt-4g-solar-ipc-dh-ipc-pts2649c-3e3z-4gb20/): IPC-PTS2649C-3E3Z-4GB20 is a 3MP + 3MP WizColor Hybrid-Zoom PT 4G Solar Power Network Camera, designed for reliable remote surveillance without requiring wired network connectivity. It combines high-quality imaging, PT functionality, 4G connectivity, and solar-powered operation for flexible deployment in locations without mains power or network infrastructure. - [Hikvision AX PRO 2 Sensor Wireless Alarm Kit (433MHz) - Hik-AXPRO-KIT](https://connixtech.co.nz/product/hikvision-ax-pro-2-sensor-wireless-alarm-kit-433mhz-hik-axpro-kit/): The an AX PRO Kit (433MHz) from Hikvision's AX PRO wireless alarm range this kit includes 2 PIR motion sensor, keypad, internal and external sounder that most satisfies residential and small commercial security applications. It provides up to 12 hours at normal temperature battery life. 96-zone wireless security alarm starter kit with wireless control panel, keypad, Camera PIR, sounders, sensor and accessories. Supports reliable wireless intrusion detection, app control and easy installation for the security applications. - [Hilook Wired Internal Dual-tech Motion Detector - HA-ALARM-PIR2](https://connixtech.co.nz/product/hilook-wired-internal-dual-tech-motion-detector-ha-alarm-pir2/): Hilook wired internal Dual-tech Pet immunity PIR motion detector with 12m detection range for use with compatible wired any alarm panels. - [HiLook Wired Sounder - HA-ALARM-SIREN1](https://connixtech.co.nz/product/hilook-wired-sounder-ha-alarm-siren1/): The HA-ALARM-SIREN1 is a wired Sounder from HiLook's wired intrusion range. It provides an 8 to 16 VDC supply. Features include IP54 protective level and sound and LED flash indication separately. Measures 140 × 134 × 33mm and operates from -20℃～＋60℃. - [HiLook Alarm Panel - HA-ALARM-P48](https://connixtech.co.nz/product/hilook-alarm-panel-ha-alarm-p48/): The HA-ALARM-P48 is an alarm Panel from HiLook's wired intrusion range. It provides up to 36hrs battery life. Measures 261 mm × 199 mm × 86.4 mm and operates from -10°C to 40°C. ## Optional - [Agent (MCP protocol)](websites-agents.hostinger.com/connixtech.co.nz/mcp) [comment]: # (Generated by Hostinger Tools Plugin)