

SKU: BFT-QBO-TOUCH
Battery-powered wireless touch keypad, 433.92 MHz rolling code, 10 channels and up to 100 codes, IP55. Pairs with BFT control units with built-in receivers or external BFT receivers.
The BFT Q.BO TOUCH (ref. P121024, part no. 2600834) is a wireless digital touch keypad that works as a 10-channel 433.92 MHz rolling code transmitter. It needs no cabling to the gate: it runs on two CR123A lithium batteries and sends to the receiver like a remote.
It stores up to 100 codes of 4 to 7 digits across 10 channels. Each channel can be learnt to a different control unit or receiver, for example the sliding gate on channel 1 and a garage door on channel 2. Adding codes is protected by a system password.
It pairs with BFT control units that have a built-in receiver, or with external BFT receivers such as CLONIX 2E and CLONIX 4 RTE. Rated range is 100 m in open field; BFT notes ferrous mounting surfaces can affect performance.
The keypad is rated IP55 and works from -10 to +55 °C. A light sensor switches on the key backlight in poor light, and LEDs and beeps confirm correct or incorrect entry. After 3 wrong codes in a row it locks out for 90 seconds. It fixes with an anti-tamper Allen screw, and a red LED after a correct code warns of low batteries.
| BFT reference | P121024 |
|---|---|
| BFT part no. | 2600834 |
| Type | Wireless touch keypad (transmitter) |
| Channels | 10 |
| User codes | Up to 100 (4 to 7 digits) |
| Frequency | 433.92 MHz |
| Transmission | Rolling code |
| Range | Up to 100 m (open field) |
| Batteries | 2 x CR123A 3 V lithium (min. 1400 mAh) |
| Protection rating | IP55 |
| Working temperature | -10 to +55 °C |
| Dimensions | 80 x 87.3 x 40 mm |
| Backlight | Automatic in low light |
| Compatible with | BFT control units with built-in receiver; external BFT receivers (e.g. CLONIX 2E, CLONIX 4 RTE) |
Our team is ready to assist with bulk orders, installation advice, and competitive trade rates.
BFT · BFT-B400
While stocks last. T&Cs apply. GST extra.
